Difference between revisions of "CuO GANS"
(→Production) (Tag: Visual edit) |
|||
Line 1: | Line 1: | ||
{{GANS navigation table}} | {{GANS navigation table}} | ||
__TOC__ | __TOC__ | ||
− | |||
Line 11: | Line 10: | ||
== Production == | == Production == | ||
[[File:CuO GANS box setup.jpg|thumb|CuO GANS Box Setup: The Setup here on the picture with led is the best option to produce a very good quality of GANS. [For emergency situations only (lower quality): If there is no led to connect the wires, you can use two Nano-coated Copper wires and twist them counterclockwise together. If you have only not Nano-coated Copper wires, you have to use one led!]] | [[File:CuO GANS box setup.jpg|thumb|CuO GANS Box Setup: The Setup here on the picture with led is the best option to produce a very good quality of GANS. [For emergency situations only (lower quality): If there is no led to connect the wires, you can use two Nano-coated Copper wires and twist them counterclockwise together. If you have only not Nano-coated Copper wires, you have to use one led!]] | ||
− | For producing CuO GANS we use a [[Nano-coating using NaOH|Nano-coated]] Copper plate and a normal Copper plate and connect it with wires and a led between, in a 5% [[Important information about Salt|Salt water solution]]. The connection wire (Nano-coated Copper) from the Nano-coated Copper plate is connected with the + pole of the led and the - pole of the led, is connected with the Copper wire to the Copper plate. | + | For producing CuO GANS we use a [[Nano-coating using NaOH|Nano-coated]] Copper plate and a normal Copper plate and connect it with wires and a led between, in a 5% [[Important information about Salt|Salt water solution]]. The connection wire (Nano-coated Copper) from the Nano-coated Copper plate is connected with the + pole of the led and the - pole of the led, is connected with the Copper wire to the Copper plate. The plates or coils should hand ca. 2cm above the ground and 4 to 7cm away from each other. |
=== Required Materials === | === Required Materials === |
Revision as of 21:52, 4 July 2019
Basics for the production and processing of GANS | |||
back to categorie: GANS |
In order to expand knowledge around the whole topic of GANS, the "Basics of production and processing of GANS" provide a compact overview.
Production
For producing CuO GANS we use a Nano-coated Copper plate and a normal Copper plate and connect it with wires and a led between, in a 5% Salt water solution. The connection wire (Nano-coated Copper) from the Nano-coated Copper plate is connected with the + pole of the led and the - pole of the led, is connected with the Copper wire to the Copper plate. The plates or coils should hand ca. 2cm above the ground and 4 to 7cm away from each other.
Required Materials
- Plastic box
- (Distilled) water
- Salt
- Green led
- Nano-coated Copper wire
- Copper wire
- Nano-coated Copper plate or coil
- Copper plate or coil
CuO GANS Uses/Application
Copper represents the physical body (in connection with the field interactions); it affects the muscle tissue and the nervous system. Copper is responsible for good communication through the nerves and Copper acts as a disinfectant. The Ghana Keshe Foundation, in cooperation with the National Atomic Research Institute, carried out tests where microbial contaminated drinking water was cleaned with CO2 and CuO GANS-water. The contaminated water was cleaned of contaminants and transformed into drinkable water. Bacteria, salts and even arsenic and mercury are neutralized through CuO GANS-water application to the point where these harmful elements were no longer detectable in the test samples of contaminated water. CuO GANS-water can be used in many areas as a natural disinfected. (e.g. rooms where food is produced, hospitals, kitchens, toilets, bathrooms and so on).
CuO is also used for energy production.