ZnO GANS
(See also: The 4 Main GANSes and Amino Acids)
Production
Required Materials:
- Plastic Container
- Uncoated Zinc plate (or coil)
- Nano-coated Zinc plate (or coil)
- 50 gram of Salt
- 1 litre of distilled water
- Optional: DC Device and fish tank pump
Nanocoating the Zinc plate
(1) Make two holes (3 mm in diameter) in two corners (2) Connect a piece of Copper wire in one of the corners (3) Prepare a NaOH solution (Caustic soda) in a sturdy plastic container and allow it to cool completely (4) Completely immerse the Zinc plate in the cooled Caustic soda solution and place a lid (5) Leave the Zinc plate in the NaOH solution for a couple of hours (6) Take out the Zinc plate and hang it over the Caustic soda solution at about 10mm distance and place the lid over the plastic box (7) Leave the Zinc plate suspended for about 24 hours (8) Repeat steps 4 to 7 several times (9) The Zinc sheet will have a dark gray-blue color (10) Wash very well for a few times the Nano-coated Zinc plate under a cold water jet
Using a power supply to make ZnO GaNs
Note: Always use latex (or rubber) gloves when handling Caustic soda, Caustic soda solution and Nano-coated plates !!! Use safety goggles to create and handle the Caustic soda !!!
ZnO GANS Uses/Applications
Zinc is a key component in more than 80 human metabolic cycles and plays an important role in the healing of wounds. The Magnetic/Gravitational fields of ZnO GANS and/or ZnO Liquid Plasma (Plasma-water) interact with the fields of human Emotions and therefore can be used to strengthen and balance human emotional needs. Liquid Plasma of ZnO GANS is termed “Peace Plasma.”
- ZnO Health Applications: ZnO GANS-water or Liquid Plasma can be applied everywhere. It is used, because emotional imbalance, conflicts and stress are the most frequent causes of human illnesses and diseases. ZnO Plasma aids almost all healing processes.
- Double Walled Health Cup Application: The gap between the walls of the cup are filled with ZnO GANS-water. The cup can be used for two purposes. 1. Fill the cup with water and let stand for several hours. The water will be energized by the fields of the ZnO Plasma-water. Drink the water. 2. Leave the cup empty and use a straw, placed in the cup, to inhale the ZnO energized air from the cup.