One Cup One Life - Production and Application - Prevention and Reversal of the Corona Virus

From Keshe Foundation Wiki
(Redirected from Application Blueprint Extended Edition of the One Cup One Life)

This is the approved revision of this page; it is not the most recent. View the most recent revision.
Jump to: navigation, search

One Cup One Life by Hassan Boujaran

If you have read the whole document in detail and still have

questions, take a look at the

111th One Nation One Planet One Race for World Peace.

Here many questions about the First One Cup One Life,

the Second Cup of Life and the Cup of Man, are answered.

Please don't make you Cups complicated as Mr Keshe has shown like in his video, it takes only 15 minutes to create a Cup.

All additional information is to guide you step by step if you have any extra need of information.


The First One Cup One Life was released through the first emergency relief in China and works on the white tissues of the lungs and brain.

The Second Cup of Life was released for the new mutation of the Corona Virus and works on the red tissues of the stomach and down the body.

The application of both Cups and the Plasma Water of each, are used in combination.

Please read carefully through both documents and apply like described.

Contents

One Cup One Life: Production and Application, Prevention

Reversal of the Corona Virus - Not by killing, through depleting it from its energy, as higher field strength gives to the lower field strength - That is the Universal Law: The more you give the more you receive

Production of the OneCup OneLife

Required equipment

In this picture you can see all the equipment and already prepared materials you need for the assembly of the One Cup One Life and the production of the GANS and the Plasma Water. In the following you will find all materials, pictures and the necessary steps described in detail


OneCup OneLife - Prepared equipment.jpg


Gas burner, fire and tongs

Three connecting wires

Zinc plate, Nano-coated Copper coil and bare Copper coil

Tape and old battery (less energy left)

Empty glass, tap water, cooking salt/table salt* and scale


*If the label lists the presents of iodine in the salt, replace it with the white sea salt that doesn’t contain iodine. E 535 (Sodium Ferrocyanide) and E 536 (Potassium Ferrocyanide) are ok, or even beneficial.

In case of emergency you can use salt that contains iodine.


Production of the bare Copper coil

For the Second Cup of Life, two coils are made from stranded Copper wire. One that is used as a bare wire and one that is used for the Nano-coating application. Approx. 30 cm (11.8 inches) of wire is needed per coil.


Preparation of the Copper stranded wire

Stranded wire is characterized by the fact that many small strands together form a wire. (See photo). You can find it in the hardware store, at an electrical store, or in an emergency, at home, in the power cables of your hair dryer, radio, television, coffee machine, etc. To do this, simply unplug the power cable from the outlet. Cut the entire electrical cord off of the appliance to use the whole cord.


Removing the plastic from the wire

Usually there are two or three wires in a power cable. The plastic outer sheath must first be removed. There are several ways to do this. (If you buy stranded wires separately, this step is not necessary)


Variant 1
One way to remove the outer sheath is to have the knife in one hand, place the cable on it and press it with your thumb carefully. With the other hand, as well as with the thumb you turn the cable and the knife cuts deeper and deeper into the plastic. Once you have reached the inner wires you can pull the separated plastic part from the inner wires. This is how you proceed step by step until the inner cables are exposed.


Variant 2

Another possibility is to place the cable on the table and hold it with one hand. Press the blade at a slight angle and with the other hand simply pull the cable backwards against the cutting direction. This way you take off a part of the plastic and can take the wires out.

Everyone has different approaches. With a little bit of trying you will find what way works best for you.


Stripping off the plastic around the strands

Now you have exposed 2 or 3 wires, which are also covered with plastic. For these wires it is best to use variant 2 to remove the plastic. Do the same as above, especially with the stranded wire, it might require some practice. Put the knife with the cutting edge back at a slight angle, with a little pressure on the plastic, and pull the wire with the other hand underneath. If you hold the knife too steep, or press too hard, you might cut into the thin strands. If you hold the knife too loosely you might slide up over the plastic and start again at the same place. Don't worry, a few cut-through strands are no problem. With some practice you will get better quickly. Remove the plastic completely.


Twisting together the individual strands of the wire

Hold one end of the wire strands in one hand and the other end in the other hand. With your fingers twist the strands together starting on one end and continue to twist all the way to the other end. Make sure you are twisting the strands firmly together and have secured any fine strands that were cut short into the group.


Winding of the coil

To wind the coil, take a pencil, or something else round and hold it together with the end of the wire in one hand. With the other hand you wrap the wire completely around the pencil. Now tighten both ends of the wire again so that it fits tightly and push the windings together. The coil is ready and can be taken off the pencil.


Creating the Nano-coated coil

Nano-coating of the wire for the second coil

Before the wire is wound for the second coil, it must be Nano-coated. This requires a gas burner. You turn on the gas and ignite carefully. Hold one end of the wire with pliers. With your other hand you carefully hold the other end of the wire. Starting with the side held by the pliers, you hold the wire in the fire until it glows red. So be careful the end of the wire can become hot. Move steadily down the wire to the other end. Each section of the wire as it passes through the fire glows red, cools down and turns black. This black material is the Nano-coating. Before it gets too hot at the other end of the hand, you stop and put the wire on something solid and let it cool down. Each section of the wire has to get black. To do this, you can repeat the process from one side to the other. Remember the wire must glow red even at the ends. Allow the wire to cool down, then proceed to the next step.

(If you have already used a Nano-coated coil for the production of GANS, do not re-coat it again! Always use fresh, bare Copper wire for Nano-coating!)

Please never cut a Nano-coated wire!


Winding of the Nano-coated coil

The Nano-coated coil is winded on a pencil like the bare coil.


Preparing the Zinc plate

Use only pure Zinc for the Zinc plate, or wire. Don’t use galvanized Iron, or chicken wire. You can get it in the hardware store, at the plumber, or in an emergency from the roof of a house, or from a battery. The cover of batteries is often made of Zinc, but this depends on which continent or country you live in. You can test the cover with a magnet. If the magnet sticks, it is not Zinc.

When the Zinc plate is ready, it is bent at the top to hang it on the edge of the glass later.

Link: Where to find Zinc in your home (Keshe Plasma Reactor Group March 11, 2020) https://youtu.be/7EMISjQ-Dpg?t=180

[1]

Keep all the components of your batteries and do not throw anything away from your batteries!

Mr Keshe will explain soon in the following teachings how to apply everything about the batteries.

  1. Source: How To Extract Zinc Plate From Battery https://youtu.be/nSd8dF_EYGc


Preparing three connection wires

For connecting the Zinc plate, the bare Copper coil and the Nano-coated Copper coil with a used battery, 3 connection wires are needed. For these connections stranded wires or a single solid pure Copper wire can be used. Cut the wires in 30 cm pieces. Strip off the plastic 2-5 cm on each end of each wire. (You will need one end of one wire to be stripped a little longer to connect the wider area of the Zinc plate. See visualisation in following pictures in "Connecting the Zinc plate".)


Connecting the bare Copper coil and Zinc plate

Connecting the bare Copper coil

To connect the bare Copper coil to the connecting wire, simply twist the ends of the wires together.


Connecting the Zinc plate

To connect the Zinc plate with the connecting cable, use the longer stripped part of the connecting wire. Wrap it around the Zinc plate as shown on the pictures and twist the Copper wire firmly together.


Connecting the two connecting wires together

Twist the two connecting wires from the Copper coil and Zinc plate, at the opposite end together.


Creating the Copper bridge and connecting the Nano-coated Copper coil

A Copper bridge is required to suspend the Nano-coated Copper coil in the middle of the glass. To do this, you bend a single strand of Copper wire into a bridge, so that it fits on the glass as shown in the picture. Next, attach by winding tightly the end of the Nano-coated Copper coil to the middle of the bridge. One end of the third stripped wire is attached by winding to one of the sides of the bridge.

(It is also possible to use plastic or wood as a bridge. In this case, the end of the connecting wire is connected directly to the Nano-coated coil (as in "Connecting the bare copper coil") and fixed on the bridge.)


Placing the coils and Zinc on the cup

The Nano-coated Copper coil wound around the bridge is placed in the middle of the glass. The bare Copper coil and the Zinc plate are attached to the opposite edge of the glass, facing each other and facing inwards. The connecting wires all face one direction to be connected to the battery.

The coils as well as the Zinc plate should be at the same height and of the same length and are not allowed to touch each other while in production!


Connecting the battery to the connection wires

Use a old battery: The battery is only used to speed up the process of production of the GANSes, but it must be almost empty, so it must contain very little energy. Otherwise it is too strong and delivers not the right result. Instead of using a battery you can place a Copper wire between the connecting wires, it takes only a little bit longer for the production of the GANSes and Amino Acids.

Together the two twisted connecting wires of the Zinc plate and the bare Copper coil are attached to the positive (+) pole of the battery with adhesive tape. The connecting wire from the Nano-coated coil is connected to the negative (-) pole of the battery. (The end of the battery with the knob is the positive pole and the flat end of the battery is the negative pole.)

Connect the connecting wires tightly and firmly to the poles of the battery.

Please battery elevate your battery, or the Copper wire between the connecting wires above your cup (example pictures below).

Creating the 15% salt water mixture: Is 150 grams per 1 liter clean water

Create a 15% salt water mixture and empty it in the cup. The coils and the Zinc plate should only be a little bit out of the water.

Make sure your connection wires don't touch the water.

Production of the materials (Amino Acids and GANS)

You will see soon bubbles rising to the surface

That is the starting process of your One Cup One Life that will form simultaneously your Amino Acids which is the fatty looking layer floating on the surface of the water and also the GANS at the bottom of your cup will be created. (From left to right: Nano-coated wire with bubbles, Amino Acids, GANS)


Different cups One Cup One Life producing GANS


Production of the One Cup One Life - Twin Cup

Another effective possibility to create the One Cup One Life Amino Acids and GANS, are the Twin Cups. They consist of two equalized One Cup One Life cups, which are connected to each other and form an infinity loop of plasmatic field flow. (The Twin Cup system is not used for the Second Cup of Life!)

Therefore place two One Cup One Life cups next to each other. The second cup is turned 180 degrees. The two blank Copper coils of both Cups, have to face each other in the middle.

The two twisted connecting wires (Zinc plate and bare Copper coil) of the first One Cup One Life, are connected by a 0.5 - 1 meter long Copper wire to the Copper bridge (with the Nano-coated Copper coil) of the second One Cup One Life. The same is repeated from the second One Cup One Life to the first One Cup One Life.

When the two cups are connected to each other, place them at a distance of 0.5 to 1 meter from each other. The Zinc plates and coils of both cups form a line.

Now add your 15% salt solution in both cups as you would in your single One Cup One Life. Soon the first Amino Acids and GANS will appear.


Preparing the materials for the first harvest of Amino Acids, GANS and Plasma Water

OneCup OneLife - Materials needed to extract the GANS 2.jpg

Materials needed to extract the GANS from the One Cup One Life

OneCup OneLife - Materials needed to extract the GANS (2).jpg

Syringe, plastic spoon, a set of 3 glass jars and reserve bottles; straw, tape, plant spray bottle or small spray bottle.


Avoid using any metals in and around your GANSes, Amino Acids and Plasma Water. Don’t use metal spoons and remove metal lids from your glass jars or any metal in any shape or form.


Before you start, join the syringe and straw with a tape.


First application: How to remove first the Amino Acids from the One Cup One Life before removing the GANS

Method

With a plastic spoon, gently remove the Amino Acids that are floating on the top. These are a fatty looking layers floating on the surface of your One Cup One Life. Place these Amino Acids in your 1st glass jar to keep for further application.


IN CASE OF EMERGENCY: Second application of the Amino Acids

The Amino Acids can also be applied as a source of nutrition. Simply dip your finger in the top layer of the Amino Acids once or twice a day and put it in your mouth.

As one dip with your finger in the Amino Acids replaces one full meal. Applicable for all living beings (animals).

The Amino Acids can still be present in the One Cup One Life or saved and put in the 1st glass jar.


Note: This application is only applied in case of starvation and shortage of food or nutrition.

Try: Start replacing one meal with one dip of one finger in the Amino Acids for your body to get used to the reduction of food.


Removing the GANS from the One Cup One Life

First method of extraction

Apply the straw to the syringe by taping. Use the syringe to extract the GANS at the bottom of your One Cup One Life.

The extracted GANS taken up by the syringe, and present in the syringe, is put in your 2nd glass jar.

Or second method of extraction

In case you have no syringe you gently empty your One Cup One Life completely in the 2nd glass jar and wait until your GANS settles completely at the bottom and the water above the GANS is clear. Now you pour only the clear salty water back into your One Cup One Life, leaving the GANS behind. Now add extra salt water to your One Cup One Life to reach the original level, so that it continues producing GANS.

Washing of your GANS

1st washing of your GANS

Add clean water to your 2nd glass jar where the GANS you just extracted is present. Let the GANS settle to the bottom of the 2nd jar until you have clear Plasma Water above the GANS.


You can save this salty water into an extra reserve bottle.


One use for the extra salty Plasma Water is to put it into your washing machine.

This salty water can also be placed around the house in open jars to deplete any virus present in the room.

You need to refresh this jar every day and dispose of this salty Plasma Water into the toilet, or any other safe disposal as it might contain the energy from the depleted virus.


2nd washing of your GANS

Add clean water to your 2nd glass jar where the GANS you just extracted is present. Let the GANS settle to the bottom of the 2nd jar until you have clear Plasma Water above the GANS.


You can save this salty water into an extra reserve bottle.


One use for the extra salty Plasma Water is to put it into your washing machine.

This salty water can also be placed around the house in open jars to deplete any virus present in the room.

You need to refresh this jar every day and dispose of this salty Plasma Water into the toilet, or any other safe disposal as it might contain the energy from the depleted virus.


3rd washing of your GANS

Add clean water to your 2nd glass jar where the GANS you just extracted is present. Let the GANS settle to the bottom of the 2nd jar until you have clear Plasma Water above the GANS.


You can save this salty water into an extra reserve bottle.


One use for the extra salty Plasma Water is to put it into your washing machine, or washing the floor.

This salty water can also be placed around the house in open jars to deplete any virus present in the room.

You need to refresh this jar every day and dispose of this salty Plasma Water into the toilet, or any other safe disposal as it might contain the energy from the depleted virus.


4th or 5th washing of your GANS in case there is any salt residual left in your Plasma Water

Add clean water to your 2nd glass jar where the GANS you just extracted is present. Let the GANS settle to the bottom of the 2nd jar until you have clear Plasma Water above the GANS.


Carefully dispose of this salty water in the toilet and flush well.


Making the Plasma Water ready to be applied

Repeat this process of washing until all the salt is removed from your 2nd jar.

Test: Dip your finger in the water after every wash and if the water no longer tastes salty the process is finished.

Now you can add a spoon of your saved Amino Acids to your Plasma Water containing the GANS. Stir it with non-metallic spoon (plastic), or glass rod, or shake it with a closed lid made out of plastic. You shake it and you let the GANS settle down until you have only clean Plasma Water on the top.


This Plasma Water is ready to be applied.

This gives your Plasma Water the extra field strength through the adding of the field strength of the Amino Acids as explained by Mr Keshe.

The field strength of the GANS is continuously transferred to the water.

Advice: Keep a ready made room temperature solution of 15% salinity nearby (1 liter of clean water with 150 grams of normal table salt). This salty water can be used to top up your One Cup One Life or multiple cups, even your Twin Cups.


Working with several cups of One Cup One Life and Twin Cups

You can harvest fresh GANSes from: Your 5 individual One Cup One Life and from your Twin Cups (these GANSes do not get washed yet).

Mix these into your 3rd glass jar.

When you have enough GANSes collected, repeat the washing process as in example 1\2\3\4, as explained above, until you have no salt present in your 3rd glass jar.

You can keep collecting your Amino Acids from all your One Cup One Life cups and Twin Cups. Save them for later in your 1st glass jar as explained above.


HOW TO APPLY IN A SAFE MANNER YOUR PLASMA WATER AND GANSES FROM YOUR ONE CUP ONE LIFE OR YOUR TWIN CUPS

The GANS needs to be always at the bottom of your bottle or any other container as visible in these images.


You only take the clean water above the GANS!

That is your Plasma Water from your One Cup One Life 2nd jar.

Same process for your One Cup One Life Twin Cups.

Never use any of your GANSes from any of your One Cup One Life or any GANS production, or any of your Twin Cups!

Do not eat, drink or touch GANS !

The field strength is too high to consume as explained by Mr Keshe in the teachings.


Different ways of storing of the Plasma Waters, GANSes, Amino Acids

Keep them in glass or plastic jars and always keep away from any metals.


Different applications of Plasma Water

Uses


Preventive Plasma Water application of the One Cup One Life or your Twin Cups

Which part to spray.jpg

Repeat this process before bedtime and when you get up in the morning:

  • Wet your head (not completely)
  • Spray your front chest and the back.
  • Spray your throat and neck.
  • Wash your face and your nostrils.
  • Wash your hands.
  • Take a full bath of what you spray from top to toe.
  • Spray your clothing every time before you leave the house and before entering the house.
  • Start using if you have the back door of your home.
  • For people in appartments spray the elevator or stairs and use gloves to press the buttons.
  • Spray your shoes and use the same shoes to go in and out. Spray your shoes inside and outside.
  • If possible apply a humidifier at all times at the front door and back door, containing only pure Plasma Water from the One Cup One Life or from your Twin Cups.
  • Spray your door handles, curtains and carpets.
  • Drink 300, and up to 500 ml Plasma Water in little sips during the period of 24 hours.
  • Inhale the field strength above of the Plasma Water through a hubble bubble (breathing cup) without metal present in the hubble bubble or create and use a self-made plastic system.
  • Repeat the inhalation process for a minimum of 3 times a day for the duration of 10 to 15 minutes each time.
  • Use the same applications for all animals, as animals are exposed the same as humans to this virus. This application stands for all creatures that have blood running through their veins.

Advice: On advice of Mr Keshe, create per family 5 individual One Cup One Life cups, as each cup carries its own field strength to support and protect you and your family in depleting the virus from its field strength. Keep the cups with a minimum distance of 1 meter apart preferably in the corner of each room or in different rooms if possible. So that the fields of each cup do not interfere with each other, and best position is in front of the window.

Mix the Plasma Waters and the GANSes from all your cups and Amino Acids together and apply as explained above.

Through the application of the Plasma Waters from the multiple One Cup One Life and Twin Cups present in your home, you are creating a high field strength as a prevention against the Corona Virus.

Additional information

Involve every family member in the process.

  • Spray the Plasma Water of the One Cup One Life on the door handles.
  • Spray the Plasma Water of the One Cup One Life on the beds, tables, walls, car, curtains, clothing, shoes and winter covers like gloves and hats.
  • Spray all other objects like plastic curtains in the bathrooms, separation curtains in hospitals at risk of infection with Plasma Water One Cup One Life.
  • Spray your mobile phone, computer, wallet, money, keys and anything that is touched regularly.
  • Your indoor pets as well as the outside animals, receive the same application of the Plasma Waters One Cup One Life. They receive the drinking water and spraying of their bodies and sleeping places from the finished Plasma Water from the One Cup One Life.
  • Place several glass jars with the Plasma Salt Water around the house preferably in every single room. They absorb the field strengths of the virus in these cups and deplete the virus from the environment. The glass jars have to be refilled every day with fresh Plasma Salt Water and the old Plasma Water has to be disposed of in the toilets and flushed through fast.

Advice: On advice of Mr Keshe place the One Cup One Life, Twin Cups that are in production around the house and if possible you place one in every single room. They deplete the field strengths of the virus in that environment.

Place them in front of the window, or they can be in your bed room.

All the One Cup One Life, Twin cups that are in production should not be placed next to each other. You have to create sufficient enough space between the cups, so that your production stay optimal and stops all interference of the field strength, so that you create correct GANSes in your cups.


Application in case of infection

Apply in a Spray, the ready washed Plasma Water of the One Cup One Life every hour: .

  • On your chest front and back.
  • Wet your face.
  • Wash your hands.
  • Wash your head. (not completely wet).
  • Drink with a 15-30 minute interval 50 ml, up to 700 ml a day.
  • Inhale 1-2 times per hour 10-15 minutes at a time.
  • Wash regularly hands and nostrils.
  • Spray the clothes and bedding regularly.
  • Spray the door handles and other objects like plastic curtains in the bathrooms at risk of infection with Plasma Water One Cup One Life.


Additional protection for the caretakers and caring family members

Before any person entering and leaving the room of an infected person, use the following procedure:

  • Use a Mask.
  • Wet your head (not completely).
  • Spray your front chest and the back.
  • Spray your throat and neck.
  • Wash your face and your nostrils.
  • You wash your hands.
  • And drink 20 ml of Plasma Water.


Additional information

How to use a mask

When using a mask, never touch it directly and always put it on and take it off at the rubber bands. Before you take off the mask, spray it with your Plasma Water One Cup One Life. Wait 3 minutes before removing.

To clean the mask, put it in a bowl with Plasma Water One Cup One Life for 10 - 15 minutes. After drying you can use the mask again.

It is good if you put the cleaned mask back on in a slightly moist state.

Avoid shaking hands with other people and don’t apply the normal welcome kisses and hugging.


Different additional information

Nano-coating explanation

When Nano-coating with fire, wind the coil after making your coating. In this way you create the space gaps required.

As explained in the different Thursday teachings of MT Keshe, the Nano-coating can also be done with NaOH (Caustic soda method). For the One Cup One Life Nano-coating you don't need to use chicken mesh. Here is the guide on how to Nano-coat with NaOH: https://en.kfwiki.org/wiki/Category:Nano-coating

(If you have already used a Nano-coated coil for the production of GANS, do not re-coat it again! Always use a fresh, bare Copper wire for Nano-coating!)

Application with battery or without

Only a nearly flat battery is used to speed up the process of production of the GANSes.

Instead of using a battery you can place a Copper wire between the connections.


Knowledge Seekers please be advised, all CH3 GANS Imust be removed from your environment

Advise: Dispose of your CH3 GANS and Plasma Water. Flush it down the toilet please! Dispose all your containers and plates! You don't want CH3 to feed the virus. Stop any experimental GANS production!

Understanding the Soul of the One Cup One Life

You never need to dismantle your One Cup One Life. Respect the soul you have created!

Link: Understanding the Soul of the One Cup One Life

How to produce Amino Acids when your cup is not producing sufficient enough

You place your One Cup One Life next to an open window or place it outside for a couple of hours.

You also can place the already finished Plasma Water with the GANS present, outside without a cover or near the window. It might take some time, but it will produce Amino Acids.


Useful tips

  • You can add on top of each metal plate like your Zinc or Copper or Nano-coated, a new Zinc plate or a new Nano-coated Copper plate or a new Copper plate. It doesn't need to be big. Make sure it touches the original plate or the wires.
  • Make sure that your salt water solution is always at 150 grams of salt per one liter of clean water.
  • Check on regular basis that your battery is not fully flat. Only to be replaced with an already used battery.
  • In case of real emergency you can use salt water direct from the sea to have your salt solution.
  • Not a single One Cup One Life in production should be covered. Nor your Twin Cups.

Additional information: As it is summertime coming, if you have a swimming pool you can create an extra field of protection. Start adding your Plasma Salt Water and Plasma Water in your swimming pool and you can swim in the water. Try to reduce as much as possible adding of the chlorine tablets.


New: Twin Cup of One Cup One Life

The applications are identical to the first One Cup One Life.

MT Keshe has added the blueprint of the Twin One Cup One Life in the 318th Knowledge Seekers Workshop: https://youtu.be/GKkCqkzfjso


Mr. Keshe explained why the application of the One Cup One Life works for this Coronavirus epidemic

The field strength of the GANS is continuously transferred to the water.

The field strength of the Plasma Water depletes the energy from the virus from its stronger field strength. It incapacitates the virus, because it depletes the virus of its field strength.

Important

Protect and check

Do the nose and breath test

Pinch your nose with your fingers and hold your breath for 10 seconds every morning. If you don’t cough within the 10 seconds and if you can hold your breath for 10 seconds, you are okay.

Start testing this 3 times a day.

Spray the whole body with the Plasma Water of the One Cup One Life. If you feel any pain or any pressure that is uncomfortable, please be alerted that you might be infected. Test yourself.


Other signs to look for

  • Cold sweats, feeling feverish, but no actual fever present.
  • Bad headache.
  • Pressure and severe pain felt when you spray with the Plasma Water from the One Cup One Life in the following areas:
    • Head, neck, chest, kidneys, stomach, ovaries, womb, testicles, prostate, knees and toes
    • Your first reaction will be a severe headache, severe swollen tongue, difficulty breathing and swallowing food, loss of appetite and always wanting to sleep.
    • Most people don't show signs of fever anymore. Be on high alert. These are the signs of Corona Virus infection.
  • Check for extra signs like pains in the femurs, kidneys, knees and toes.

If any of these symptoms are present, please let us know in our available channels at the end of this document.


Links for help

You will find help in the following international Telegram language groups.

Keshe One World Family: https://t.me/joinchat/I2ksVVbvb7OjcDR_3qSugQ

Established language groups on Telegram: Portuguese, Farsi, Italian, German, Nordic, Maltese, Netherlands, Canadian, French, Romanian, Spanish, British, United States, Keshe One World Family. More will follow as you are applying for it.


First edition video of the One Cup One Life created for the emergency relief in China: https://mega.nz/#F!RXwi2QSb!HqqCqSiflkaD7X5FFssnMg


Final words

  • Keep strictly to the above described "Applications to prevent and in case of any infection!"
  • In case of any infection please contact the www.keshefoundation.org webmaster or try to find the Universal Council language member, Universal Council support member, or the nearest Knowledge Seeker.
  • Collect as much data possible on your observations and freely share your knowledge.
  • Come and share your knowledge in the public testimonials: Public Meeting for Testimonials
  • Be careful and cautious!


As it is mentioned above about the Twin Cups One Cup One Life, the complete information will be added in the near future.

On M.T.Keshe's request, as you received the knowledge about the One Cup One Life, please pass it on and teach 10 more people about the One Cup One Life. Request from those you teach, that they teach 10 more people and promise to receive this gift freely and give this gift freely.

We are here to serve and not to be served!

We request freely for you to sign the World Peace Treaty.


This page and information was updated 2020-03-22