How to make GANS-water, Plasma-water and dried GANS

From Keshe Foundation Wiki
This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search
Basics for the production and processing of GANS
back to categorie: GANS

How to Make GANS Water

After the salt has been washed out of the GANS, the GANS can be stored in distilled water.

By shaking the container the GANS mixes with the distilled water. Depending on the GANS it settles faster or slower to the bottom of the container. It is suggested to wait 24 hours. So the GANS has time to settle down and the Magnetical and gravitational field strength of the GANS will be transferred into the distilled water, depending on the field strength of the GANS that was created.

The distilled water (water sitting above the GANS in the jar) has been plasmatized with the field strength of the GANS and is plasma can be used for various applications.

When you remove GANS water from the GANS storage container for application purposes, ensure that you take ONLY the clear water from the container. DO NOT take GANS from the container unless you need it for a specific application.

Every time you remove clear GANS water from the container, pour distilled water into the container to refill it, seal it and let is stand for at least 24 hours before using the GANS water for application purposes.

The GANS continues to transfer its field strength to the distilled water.

How To Make Plasma-water (Liquid Plasma)

Every type of GANS water can produce a respective “Liquid Plasma” (Plasma-water).To produce Liquid Plasma, with a syringe or an eye dropper (pipette), take a few drops of GANS water and place them into a container of distilled water.

The GANS water field strength will be transferred from the drops to the volume of distilled water instantly, especially if the mixture is stirred or shaken. For stirring, create a stirrer from a nano-coated copper coil wrapped around a glass rod. The turbulences creates vortexes within the water which act like field strength amplifiers (similar to the procedure in homeopathy).

If you do not have a nano-coated stirrer you can use any stirrer, like a spoon or a rod or even a blender to stir the mixture.

Keshe calls the mixture of distilled water + the drops of GANS water “liquid plasma.”

If you produce liquid plasma from GANS water for internal use (to drink), you can put the GANS water drops (or ml, teaspoon, soup spoon) directly into your drinking water. In this case you should not stir the drinking water with a nano-coated stirrer; use a normal spoon.

How To Dry GANS

Optional: Drying the GANS with a fan

GANS can be used in a moist or solid state. You can store GANS in distilled water, keeping it moist, or you can remove it from the distilled water and dry it into a solid powder. In the end, the properties of the GANS remains intact in either state. For health application we most often use GANS water.

Sometimes dried GANS is preferable for a particular application. When drying GANS the aim is to do it naturally to gently withdraw moisture from the GANS. Under no circumstances is GANS to be dried by heating it over an open fire or on a stove top. The more natural the drying process, the better. It is possible to speed the drying process by putting the moist GANS on top of a heating radiator or heating vent, or by placing the GANS near a lamp that has a heat producing bulb. If crystals form during the drying process, this is an indication that the GANS was not washed thoroughly during the GANS washing process. The crystals are likely salt crystals. During the drying process the GANS will turn to a paste, and after more hours pass it will turn to a powder.

back to top