CuO GANS

Basics for the production and processing of GANS

The 4 Main GANSes and Amino Acids (CO2, ZnO, CH3, CuO) Important information about Salt Opportunities of accelerating the GANS production Harvesting the Amino Acids and washing out the GANS How to make Plasma-water and dried GANS Quality standards and order Measuring GANS

Methods of making all other GANSes Replication Units

back to categorie: GANS

In order to expand knowledge around the whole topic of GANS, the "Basics of production and processing of GANS" provide a compact overview.

Production

CuO GANS Box Setup: The Setup here on the picture with led is the best option to produce a very good quality of GANS. [For emergency situations only (lower quality): If there is no led to connect the wires, you can use two Nano-coated Copper wires and twist them counterclockwise together. If you have only not Nano-coated Copper wires, you have to use one led!

For producing CuO GANS we use a Nano-coated Copper plate and a normal Copper plate and connect it with wires and a led between, in a 5% Salt water solution. The connection wire (Nano-coated Copper) from the Nano-coated Copper plate is connected with the + pole of the led and the - pole of the led, is connected with the Copper wire to the Copper plate. The plates or coils should hand ca. 2cm above the ground and 4 to 7cm away from each other.

Required Materials

• Plastic box
• Clean water
• Salt
• Green led
• Nano-coated Copper wire
• Copper wire
• Nano-coated Copper plate or coil
• Copper plate or coil

Green led - Anode (+) / Cathode (-)

• 

  CuO GANS production

• 

  dry CuO GANS powder

• 

  CuO GANS after water had been added to wash it and settles down

CuO GANS Uses/Application

Copper represents the physical body (in connection with the field interactions); it affects the muscle tissue and the nervous system. Copper is responsible for good communication through the nerves and Copper acts as a disinfectant. The Ghana Keshe Foundation, in cooperation with the National Atomic Research Institute, carried out tests where microbial contaminated drinking water was cleaned with CO2 and CuO GANS-water. The contaminated water was cleaned of contaminants and transformed into drinkable water. Bacteria, salts and even arsenic and mercury are neutralized through CuO GANS-water application to the point where these harmful elements were no longer detectable in the test samples of contaminated water. CuO GANS-water can be used in many areas as a natural disinfected. (e.g. rooms where food is produced, hospitals, kitchens, toilets, bathrooms and so on).

CuO is also used for energy production.

back to top