Category:Plasma Scientific Journal

From Keshe Foundation Wiki
Revision as of 12:41, 23 January 2019 by Jazzmatazz (talk | contribs)
Jump to: navigation, search

GANS and Nano

Oil, Gas, Protein and the Earth

Author: Mehran Tavakoli Keshe founder of the Keshe Foundation © M. T. Keshe 2000-2014. All rights reserved. Written on 25.4.2014 Published on 5.2014    

Keywords: renewable resources, natural processes.

Published: January 2019.

Note

The contents of this paper and its images cannot be quoted, copied or printed, in full or in part, as hard copy or electronically or be put anywhere on the Internet or any network or be sent in any communication or be used, linked or quoted in any article or book without prior written agreement of the author.

In the present state of art of science and geological theories, it is considered that all petroleum oils, which are extracted from the inner layers of the Earth, are due to the decomposition of the oils from animals and vegetations, which have died or been imbedded in the layers of the soil of this planet over millions of years. 

This theory considers that these remains, be it animal tissue or leaves of trees, as they were buried in the ground or covered by soil, and as these bodies decomposed, then their oil was slowly released into the earth’s solid top section. 

It is thought that due to the gravity of the earth, these oils were then sucked and moved into the inner parts of the earth. As these oils warmed and went through the compression and high temperature of the inner layers of the earth, then these oils became as they are today, when extracted from different depths of the earth. 

Nowadays, these oils are refined by the oil industry for different applications, the like of petrol for the motor industry, lubrication and so on. This theory could be partially correct, but with the amount of oil and different types of oils which have been found around this planet and the different compositions of them, this theory is no longer acceptable in the light of the new discoveries regarding the 

production of new materials from the atmosphere of this planet, which our field tests and laboratories trials demonstrate. 

In the research and development of GANS (gases in Nano state, which is a solid state of a gas, at room temperature) of matters and with the process of the conversion of for example CO2 from the gas state to the solid state of its matter state as a GANS, this process of the release of GANS, has simultaneously led to the creation of layers of protein on the surface of the containers, while the CO2 conversion from gas to GANS has been in progress. 

These fat layers have been sent to different institutes for nuclear and chemical evaluation, their data will be released in due course. In the same process, it has been observed that low levels of energy are generated and released in the liquids during this process of conversion of gases to GANSes. This leads to the creation of heat, needed for maturing and to allow the conversion of the proteins to lead to the creation of oil, and keeping it in semi-liquid state as it is extracted from the deeper layers of the planet nowadays. 

Figure 1: Gans production cell with thick surface layer.

This process of energy release by the conversion of gas matter to GANS releases energy, and the human body uses this same process for its heating, to keep it at about 37° Celsius. In our laboratory tests, which we have observed and used the presence of different elements for the conversion of matter to GANS, and these have led to production of different compositions, thickness and density of the protein on the top layers of the liquids of each test compartment in their test environment. 

For example, when less salt is used for the conversion of the matter to GANS, the protein composition is thinner and feels much lighter in texture compared to if we use more compact wiring and for the coating of the wires a more compact matter density Nano material and a more salty environment condition in the different compartments of the test tubes of these systems. This in fact shows that the more dense the matters and metals were in the compartment and the higher the salt concentration in the water, the thicker the protein layers look and feel at the top of each compartment. (Figure 1, 3-5) 

On the other hand, in tests done in Fukushima concerning the decontamination of the radioactive contamination of materials like the Fukushima farming soil and water, the person carrying out the test was asked and reported the observation of fat and oil on the top layers of the soil once the GANS materials were introduced into the sample test units. This confirms that protein production occurred during the conversion process with the use of GANS materials in the presence of salt and water in the environment of the test units in the lab and in the soil. Therefore, considering the laboratory tests, and the tests done with the soils from Fukushima, it is clear that different oil compositions developed depending on the salt and metals and minerals in the environment of the conversion in different test compartments. Oil in the inner parts of the earth was and is produced by the same process, and not by the process of the decomposition of plants and animals over millions of years. Therefore, with these tests it can be understood and confirmed that oils which nowadays are extracted from the inner parts of this planet are not and were not produced from the remains of the animals which were roaming the green planes of this planet, or they were not due to the decomposition of the plants on the surface of the earth. 

In fact, this planet has changed and produced its oil through and during the conversion of CO2 from gases to GANS state of matter and in the process has released a vast amount of Oxygen in its atmosphere, as has been explained in the other papers by the author. (Figure 2, 3, 4) In other words, even the change of atmosphere from its acidic to oxygen levels has been through the process of conversion of state of matter and in presence of nitrogen and carbon, and hydrogen released and oxygen present has led to creation of protein, and in given condition to creation of amino acid of life on this planet. 

Figure 2: Gans production cells with gas bubbles.

Physical and tangible lives are sometimes creating in the universe in different forms through this process and life is not exclusivity of this planet. So the creation and production of different types of oil, be it called light or heavy oil, which is extracted from the bowels of this planet by the oil companies, exist due to the conversion from gas to GANS state of CO2 and other matters and have nothing to do with the present assumptions that the oil comes from the decomposition of the remains of animals and plants millions of years ago. 

The truth is that the Earth, even at the present, is still carrying on with the same process, and this is due to its construction and material composition. So even today and every day the Earth is producing large quantities of oil which are naturally sunk into the inner layers of this planet and then in time, these new and ever continuous conversion of different state of mater will lead to the production and storages of different types of oil in the inner sanctum of this planet. 

The present increase in CO2 in the atmosphere is causing the natural production of more oil and can be used to produce protein directly from the atmosphere, and this process simultaneously increases the level of oxygen in the earth’s atmosphere, as we have shown in our tests. 

So by this process, that which is now considered air pollution, can be benefitted from, to enhance the process of the production of different oils with different compositions, without going through millions of years of conversion, as we have demonstrated in our tests in the laboratory and in our field trials. 

Thus: the theory that the creations from the past are at the origin of the present oils, is a fallacy and this oil has nothing to do with animals and plants, its formation is a normal and natural process of creation of proteins from the environment of the planet, without the intervention of other entities like animals. In reality, as animals and plants produce protein, the earth itself also produces protein. Due to the process of conversion of CO2 in its atmosphere, and in the presence of metals and salts in different layers of its structure, this has led, is leading and will lead to the production of protein, as has been observed in the lab and different tests in Fukushima in a natural way. In the case of oils which are extracted from the earth, the proteins were produced in the environment, and if they were not absorbed by or attached to another element to become an amino acid as part of plants or animals, then these mostly sunk in the soil of the earth and In the process became non-animal, planet protein. 

Next these proteins in liquid condition are collected in the inner sanctum of the planet, and then become further heated and become oils, as they are extracted from the inner part of this planet nowadays. 

Therefore the oil industry of today should have no worries that one day the oil will finish, as this oil is produced by the planet, and it simultaneously makes oxygen for man to breathe. 

As long as there are salts in the seas and there is CO2 in the atmosphere of this planet, and as long as there are different metals and semi-metals floating in the lakes and the oceans of this planet, these materials, and the process of conversion of CO2 from gas to GANS, in their Nano condition behave like the materials in the test tubes of the laboratory tests. This conversion process releases oxygen into atmosphere, as has been observed in the tests, and simultaneously new proteins are formed, and so there shall never be a shortage of oil in this planet. As man is using more oil and releasing more CO2 in the atmosphere, then as long as the salt lakes and oceans exist, more and more oxygen is released in the atmosphere of this planet. 

Figure 3: Gans production cell with thinner surface layer and gas bubbles.

At the same time, in the upper layers of the atmosphere of this planet, there is a continuous production of nitrogen, through the conversion of fields and rays. This creation of matter guarantees a continuous, everlasting production of protein and oil for the future generations of men on this planet. 

As has been shown in tests, one can produce oil for the oil industry directly and with little costs and without waiting for millions of years for the process to be completed, by simply replicating this process. This has been demonstrated by the production of GANS of CO2 in the laboratory, and by their positioning in the salty environment of containers, where we can continuously harvest protein and fat, this is a replication of the oil production from the environment on this planet. 

In reality one does not need to grow corn and seeds for their sugar and oil content to produce fuel for the industries of today. If the past millions of years of the geological structure of the planet are studied in detail, one will discover that most of the present oil reserves, which are extracted from the earth, are near and below the areas where waters reserves like lakes, salt lakes, seas and oceans used to be on this planet in the past. 

Therefore, as the waters of different salt content and other matters in dilution converted the CO2 into the GANS state of its matter, and from a Magrav point of view, brought balance between four natural elements of this planet’s atmosphere and its waters, by creating an environment of Magravs balance of an amino acid (containing hydrogen, carbon, nitrogen and oxygen), then the Magravs balanced GANS of these elements has led to the creation of Magravs of what is known as protein. 

If this molecule of protein with balanced Magravs has managed to attach itself to other molecules or matters in process of its life, it has succeeded to manifest itself as protein in the vegetative form. As it managed to interact with different salts and waters and elements, it led to the creation of water microorganisms and later on fish, which could live in the environment which itself led to their creation. 

In turn, as these life forms managed to use the energy of the hydrogen in the moisture rather than in the liquid, they became air breathing entities, needing an organ like a lung for the extraction of energy from the same process, as we see in man. 

Figure 4: Gans production cell with thick surface layer and gas bubbles.

In some cases where the protein did not manage to attach itself to other elements, and due to a large and rapid conversion, this led to the production of surplus oils, and after drying of the lakes and seas, these oils were left on the surface of the planet and due to their weight, in duration of time, they sunk in the soil and became buried and heated and became the present oil and gas reserves. 

In other words, oil and petroleum can be made and replicated freely and easily using the new understanding of the production of Nano materials and the GANS of the material in the environment of the salt of the liquid. At the same time, we have seen that in the process of the production of protein, gases are released in the liquid of the containers in the laboratories, so if one creates conditions, one can create the right conditions for the release and production of methane and any other gases which man needs. We have demonstrated this in the tests, and published it in the book “The structure of the light” with Raman spectroscopy tests as proof. Also the observation that these gases are extracted from the inner sections of this planet, like the oil, is a confirmation. Thus the gas reserves being near the oil reserves are a natural process in the conversion of CO2 from gas to GANS state in the life of this planet. 

Figure 5: Gans production cell with thin oily surface layer.

So the creation of gases and their release in the environment, is part of the same process which leads to the production of GANS and protein, as we observed gas bubbles being released in the same containers. This new technology opens a new era for man’s energy production, which is matter dependent, as is his life which is connected to this planet. Thus there is no need for energy control and oil, as every man can produce his own oil and gas for his energy and life if one needs. Now we need to understand which oil and protein man would like to have, to eat for life energy, or to burn as fuel. In space man in producing CO2 in the spaceship crafts, in the future, his waste of CO2 becomes his food for his energy, by producing protein, and at the same time his source of oxygen production for his life. In space there is no need for life support systems to keep man alive. Man will create his own food and oxygen through the use of simple processes, as we have shown in the laboratories. This way as a race, he can stay alive for thousands of years in deep space without the need for earthly resources. 

This is the wisdom of creation, man never understood the process of creation in his planet, and the same process has and will be carried out in the rest of the universe, with the difference that in some cases the molecules will be invisible to the physicality of man’s limited detection Magravs strength systems, due to their balance of Magravs with their environment. 

Thus oil has never been from the body of animals as this would have needed much more animals that this planet could ever support, but it has been a nice story to tell the grandchildren, and again we have unraveled another mystery of creation in the universe of man, who still has a limited knowledge of his environment. 

Production of the four basic GaNSes: ZnO, CO2, CuO & CH3

by KF SSI Education Team.

Keywords: zinc oxide, carbon dioxide, copper oxide, hydrocarbon, gans production.

Published: January 2019.

Subject

This paper provides the reader with an easy to follow, step-by-step guide on how to produce the four basic GANSes, which are in various ways connected to our bodies. Other resources relating to this topic exist on the KF Wiki [1] and the KF SSI YouTube channel [2]. The basic theory behind the production procedure is explained together with the affinity of each of these GANSes to the particular aspects of the human (or any other animal’s) body. 

Taking a step back, let’s first consider what GANS actually is. GANS is the abbreviation for Gas in Nano-state of Solid and as explained by M.T. Keshe in his second book, "This condition of GANS of matter comes about at ambient temperature and pressure when due to internal Gravitational and Magnetic fields’ strength of the atom the atom’s physical appearance changes and the atomic structure of the gas changes to a compact configuration of the solid. The atom of the same gas becomes and behaves like a solid but with totally new properties and characteristics which were never known when the atom was in its other three initial known states (gas, liquid and solid)." (Keshe, 2011).

Method

Table 1. Metals used in the production of the four basic GANSes.

There are many methods through which one can produce GANSes. Traditionally, this is achieved through the use of two (or more) metal plates or coils, one of which is Nano-coated. Table 1 gives an overview of which metals are used in the production of the four GANSes. Other methods exist, for example, GANS of vitamins, food and other substances can be prepared through the use of caustic soda or CO2 GaNS and plasma water. The process in a GaNS production box is similar to the process of absorption of food or air – no matter crosses the wall of the lungs or intestine, but a certain condition is created to attract the field of the elements of Oxygen (lungs) and other matter consumed (intestine). In this way human body (and the GANS production box) creates a condition of a ‘magnet’, which attracts fields of a specific strength (being the weaker and hence dictating the direction of the flow). The attracted fields, in the salty water environment, slow down and transform into the matter state of a given element.

The complete list of materials required for the production of any of these four GANSes is as follows:

  • Plastic box (optionally Nano-coated for faster production)
  • One metal plate or coil
  • One Nano-coated metal plate or coil
  • Pure sea salt and distilled water
  • Copper wire for short-circuiting of the metals
  • Green LED
  • Two alligator clips (optional if plates are not drilled)
  • Nano-coated plastic spoon to harvest amino-acids
  • 2 x Plastic or glass containers to store amino-acids and GANS
  • Syringe to collect the GANS or to remove excess water

Production procedure

Step 1)

Depending on which GANS one wants to produce (as per Table 1), Nano-coat one of the plates/coils following any of the available video or text guides [3]. Prior to this process, if using metal plates instead of coils, drill a hole in a corner of both plates (this eliminates the need for the use of alligator clips). If no drill available, alligator clips can be used. 

Step 2)

Hang the two plates in the production box, opposite each other at a distance of several centimeters - as per Fig. 1. Plates or coils should not touch the bottom of the container but instead should be fixed 1-2’’ above its bottom. If they sit on the bottom of the box, this will slow down or prevent GANS from being produced.

Step 3)

Connect the two plates via a copper wire either by going through the drilled holes or using alligator clips. Optionally when connecting the plates, one can place a green LED in this circuit. The use of an LED light in the circuit helps to create the flow of energy between the plates. As with every GANS production, connect the anode (longer piece of wire = positive pole) of the LED with the copper wire that leads to the Nano-coated metal plate/coil, and the cathode (negative pole) with the copper wire that leads to the metal plate/coil (Fig. 1).

Figure 1. GaNS production box.

Step 4)

Fill up the GANS production box with a 3.5-10% sea salt, distilled water solution (make sure the salt is not contaminated by any minerals). Place the box away from other boxes and reactors and leave alone for couple of weeks. The time needed to produce each of these GANSes depends on a number of factors, such as type of GANS produced, materials available in the proximity of the production box, water salinity, distance between the plates, quality of the Nano-coating, purity of metals and other. 

Step 5)

When one observes the deposit of the GANS at the bottom of the box, or the plates become too salty or worn out, it is time to harvest the GANS. Set the plates aside and with a Nano-coated plastic spoon, collect the amino acid which floats on the water’s surface. Store it in a clean glass or plastic container and top it up with distilled water not to dry out.

Step 6)

Either use a syringe to collect the GANS sediment from the bottom of the production box or carefully remove the excess water with it and pour the sediment into a separate glass or plastic container to store it. Washing of the GANS to reduce salinity is optional and depends on the application area. For more information and pictures, detailed guide on the production of the four basic GANSes is available on the KF wiki [4].

Figure 2. The four basic GANSes [7]. 

Useful Tips

  • Make sure you wash your Nano-plate of any caustic soda residue, before using it in the GANS production.
  • Handle Nano-materials with care. Do not scratch it, be gentle with it and never stack it up. 
  • Use caustic soda Nano-coating method which results in more permanent Nano-layers than fire-coating. 
  • Make sure the salt you are using has no impurities.
  • You can produce GANSes not only through the use of sea or table salt (NaCl) but also using other salts such as Magnesium or Potassium. 
  • Nano-coat your GANS production box for better results or simply reuse one from a previous GANS production of the same GANS as during the production process walls of the container get Nano-coated.
  • As water from your GANS production box evaporates and decomposes into GANS, some of the salt crystals can deposit at the bottom, which reduces water salinity. Top up your boxes with distilled water and if needed add some salt into the distilled water used for topping up. 
  • Keep you GANS production boxes at least 3-5 meters apart in order not to influence the process in each box and to achieve the expected results. 
  • Use plates/coils which are not too thin as they can break either during the Nano-coating or GANS production processes.
  • Every GANS produced is different in strength – think of it as isotopes of the same element. Therefore, in order to cover a wide spectrum of fields, add your e.g. freshly produced CO2 GANS into the jar/container with previously produced CO2 GANS. Over time, your CO2 GANS has many different ‘flavors’ to it and can be more effective in any application area. 

How does it work

Let’s consider the CO2 GANS production in which a Zinc and a Nano-coated copper plates are used. Atomic weight of Copper is just over 63.5 (69% of the copper isotopes is Cu63 and almost 31% is Cu65) and Zinc is 65 (just over 49% is Zn64, other isotopes are in the range of 66-68) [5]. In the Nano-coating process, any metal loses around 5% of its atomic weight. Therefore, Copper reduces to around 59 atomic weight. The difference between the two plates (65 and 59) is 6 and it is the atomic number (number of protons in the nucleus) of Carbon. Therefore, the CO2 production box creates a plasma field between the two plates of the strength 6, which like a magnet, attracts Carbon present in the atmosphere around the box. In plasma, stronger feeds the weaker to find balance, and hence the field created in the box is the weaker part. In the salty water solution, Carbon oxidizes in the presence of the plasma of Oxygen and deposits as a CO2 GANS at the bottom. The side effect of the CO2 GANS production is the presence of ZnO GANS. The Nano-coated copper plate creates a condition for attraction of Zinc from the Zinc plate, which in turn oxidizes to become the ZnO. As a result, the CO2 box produces a mixture of CO2 and ZnO GANS, where the ratio of the two depends on the setup. More details can be found on the KF wiki page on the CO2 GANS production [6].

GANS of CH3 is produced in a similar way and is a 2-stage process. Firstly, the Nano-copper (59) interacts to find balance with the layer of Zinc of the galvanized Iron. This ‘magnet’ for Carbon attracts this element and as a consequence the CO2 GANS gets produced and deposits at the bottom of the box. Secondly, the fields of the Nano-coated copper plate interact with Iron (atomic weight close to 56, with almost 92% of Fe56) and create a ‘magnet’ for H3. Tritium attracted from the atmosphere binds with Carbon fields already present in the salty water environment and deposits as the CH3 GANS at the bottom of the production box.

CuO and ZnO GANS productions use the same metals to produce it. For CuO it is Copper and Nano-copper, for ZnO it is Zinc and Nano-zinc. The Nano-coated metal plate attracts/pulls elements out from the other plate, which then oxidize in the plasmatic water environment and deposit at the bottom of the container in the form of GANS. GANSes acquire the affinity towards the environment which produced it. Therefore, the CO2 GANS has affinity towards Copper and Zinc, as well as towards Sodium (as NaCl is present in the water). Moreover, whatever materials are used in the Nano-coating process, the produced GANS also has affinity towards them e.g. using Magnesium Hydroxide Mg(OH)2 in the Nano-coating process. Therefore, each of the produced GANSes differs in strength as it is affined to the elements and environment which produced it. In other words, these are the common denominators Knowledge Seekers hear so much about in various context. 

Observations

During the GANS production one observes the following. Firstly, oxygen bubbles appear on the Nano-metal plate/coil. After couple of days (or weeks, depending on the setup) one can notice a sediment deposition at the bottom of the production box and a thin layer of amino-acid building on the water’s surface. Often, salt crystals build up and deposit on the part of the Nano-plate which is above the water’s surface. 

Usage

Table 2. Use of the four basic GaNSes. 

The GANS and amino-acid production is the way life started on this planet. It all started in the salty water environment of the Oceans and surrounding matter and GANS state. During GANS production process, the two metal plates in a salty water environment create a condition for attraction of certain elements e.g. Carbon, Zinc, Copper, Oxygen, or Hydrogen. These are the basic elements, which life on this planet is based on. Table 2 shows the connection of these four basic GANSes to the human being. GANSes are the basis of the Plasma Technology and are applicable in many areas, such as Food and Agriculture, Health, Energy, Decontamination, Space Travel and other. Amino-acids collected from different GANS production boxes are of different strength in respect to each other, as they get attracted by different strength `plasmatic magnets` created between two metal plates. GANS is also used to prepare the liquid plasma by mixing it with distilled water and collecting the water above the sediment. For applications in Health and Agriculture, amino-acid is added in the process of preparing the liquid plasma to strengthen its connection to living organisms, which are all based on amino-acids. 

Acknowledgements

Ganses-6.jpg

The content presented in this publication is based on the knowledge and discoveries of M.T. Keshe and other Knowledge Seekers who over the course of the years documented it in the form of videos and wiki articles. 

Supplementary material

An extensive guide on how to produce these four basic GANSes is available on the KF Wiki. These guides contain links to YouTube videos and other handy resources. Please visit https://en.kfwiki.org/wiki/Category:Nano-Coating_and_the_Production_of_GANS for more details.

References 

  1. https://kfwiki.org/ 
  2. https://www.youtube.com/channel/UCtQzN7XLiLvTpyUnQAa1mRw 
  3. https://en.kfwiki.org/wiki/Category:Nano-Coating_and_the_Production_of_GANS#Nano-Coating_Using_NaOH 
  4. https://en.kfwiki.org/wiki/Category:Nano-Coating_and_the_Production_of_GANS#Different_Types_of_GANSes 
  5. https://ptable.com/ 
  6. https://en.kfwiki.org/wiki/CO2_GANS 
  7. https://store.keshefoundation.org/store/product/GANS_Reserve_Bottle/ 
  8. Keshe, M. (2011). The Structure Of The Light. Stichting the Keshe Foundation.

Magnesium GANS: production and uses

by Jon Bliven, Keshe Foundation Manufacturing Arizona.

Keywords: GaNS production, Mg GaNS, nano coated Magnesium, healts, plants. 

Published: January 2019.

Subject

Mag-2.png

This paper documents the production of the Magnesium GANS and identifies its potential uses.

Method

The proposed method of GANS production uses a standard GANS production kit, such as the one available from the USA store [1]. The production of this GANS is analogous to the CuO GANS production. In the production of CuO GANS, one uses a copper plate and a Nano-coated copper plate. The production of Magnesium GANS requires two magnesium plates, one of which is Nano-coated. 

Materials

The complete list of materials required for the production of this GANS is as follows:

  • Plastic box
  • Two magnesium plates (anodes or magnesium ribbon), one of which is Nano-coated
  • Two alligator clips (optional)
  • Pure sea salt and distilled water
  • Copper wire
  • LED (optional)
  • 1.5 V battery (optional)

Procedure

Step 1) 

Nano-coat one of the magnesium plates. Alternatively, one can also use magnesium anodes 4 to 6” long or magnesium ribbon. Nano-coating magnesium is through the same caustic process as Nano-coating copper. For further info on Nano-coating refer to the KFWiki [2].

Step 2) 

In a GANS production box, position the Nano-coated magnesium plate opposite the magnesium plate. As with every GANS production, when using the anodes or the plates, position them 1-2” above the bottom of the production box. If they sit on the bottom of the box it will slow down or prevent GANS from being produced. 

Step 3) 

Figure 1. Magnesium GANS production box.

Connect the two magnesium plates to each other via a wire. Small holes can be drilled into one corner of each plate, prior to the Nano-coating process, that can be used to connect the wire to the plates. You can avoid drilling holes in favor of using alligator clips to connect the LED to the plates, however, it is very important to ensure you do not scratch the Nano-coating of the copper plate when attaching the clip. The use of an LED light in the circuit helps to create the flow of energy between the plates. Connect the anode (longer piece of wire = positive pole) of the LED with the copper wire that leads to the magnesium plate/coil, and the cathode (notch or shorter needle on LED package = negative pole) with the copper wire that leads to the Nano-coated plate. 

Step 4) 

Fill up the production box (as in Fig. 1) with a 3.5-5% sea salt, distilled water solution (make sure the salt is not contaminated with any minerals). Place the box away from other boxes and reactors and leave alone for 7-14 days. 

Step 5) 

When one observes the deposit of the GANS at the bottom of the box, or the plates become too salty or worn out, it is time to harvest the GANS. Set the plates aside (remembering the polarity if you wish to use them again) and with a Nano-coated plastic spoon, collect the amino acid which floats on the water surface. Store it in a clean glass or plastic container. 

Step 6) 

Using a syringe, collect the white or cream colored GANS and the black GANS into separate jars. These color differences are different isotopes of the magnesium. One can see our color collection in this video [3]. 

Magnesium is a softer metal and if pieces of metal have fallen off during the process, then strain it through a cloth filter. 

Caution: Do not use too thin a gauge plate as the metal is soft and can break from deterioration with the Nano-coating process.

Advice: If the GANS production is slow, try moving the two plates closer to each other; Also, it is best if a small amount of electricity is used (about 1.5 volts) from a battery or power supply. As with an LED, connect the negative polarity to the Nano-coated plate and positive to the pure magnesium plate. 

Should the GANS be washed after collection? 

NO – When GANS is not washed it holds its energy strength. If using the GANS in reactors or patches, this is the preferred method. In patches it is best to match the salinity of the body or about 1% for best results.

YES – When using it directly with agriculture it is best to have a low salinity of less than 1%. This requires at least one washing.

Usage

Figure 2. Magnesium GANS patches.

Magnesium is the 11th most abundant element (by mass) in the human body and is essential to all cells and some 300 enzymes. Magnesium ions interact with polyphosphate compounds such as ATP, DNA, and RNA [4]. Magnesium is vital for the proper functioning of hundreds of enzymes. Consuming adequate magnesium can have the following benefits:

  • Reduce premenstrual symptoms,
  • Prevent problems in the bones and improved bone health,It helps assimilate calcium into the bones and plays a role in activating vitamin D in the kidneys,
  • Managing diabetes. It plays an important role in carbohydrate and glucose metabolism,
  • Magnesium is necessary to maintain the health of the muscles, including the heart, and for the transmission of electrical signals in the body. It has been shown to lower the risk of fatty build-up on the walls of the arteries as well as lower the risk of hypertension or high blood pressure,
  • Prevents or relieves migraine headaches,
  • Relieving anxiety. (Ware, 2017) [5]

Most magnesium is absorbed in the small intestine, so this might be an area to allow the energy fields to best work.

Magnesium Patches for Health

Figure 3. Lemon tree with Zinc and Magnesium GANS ball.

Figure 2 shows GANS patches with purple colored ‘water beads’ to improve health in certain areas. I wore these for about 1 hour at a time to observe results. 

Lemon Tree

For application in plants, a ball loaded with Zinc and Magnesium GANSes was placed in the 8-year-old lemon tree (Fig. 3) that has produced very little harvest to date. It has been in the tree for only a month or two and will need to continue to monitor.

Observations

In both cases the observations are incomplete, but it is my thoughts that with more time very observable benefits will start to show up. Magnesium is very important part of our health and the health of our plants. It is hoped that by sharing this, others might benefit from this information.

Acknowledgements

Much of this understanding is the result of my years with the Foundation and the teachings of Mr. Keshe. 

References 

  1. https://usastore.keshefoundation.org/store/product/gans-kit-home/ 
  2. https://en.kfwiki.org/wiki/Category:Nano-Coating_and_the_Production_of_GANS#Nano-Coating_Using_NaOH
  3. https://youtu.be/r2e4MtW29Cw
  4. https://en.wikipedia.org/wiki/Magnesium 
  5. Ware, M. (2017, 12 20). Why do we need magnesium? Retrieved from Medical News Today: https://www.medicalnewstoday.com/articles/286839.php 

Supplementary material

Magnesium GANS production setup and its different colors area captured in this video https://youtu.be/r2e4MtW29Cw

A Simple Guide for Producing GaNSes of Tritium (H3), Deuterium (H2), Hydrogen (H) and Neutron

by Marius Zega, Keshe Romanian Association, in collaboration with the Romanian Knowledge Seekers . * This material was prepared by the team of Knowledge Seekers from the Keshe Romania Association and was written by Marius Zega based on information from M.T. Keshe’s teachings and personal experiences of the team in producing these GaNSes.
Keywords: space fuel, multi-core reactors, plasmatic isotopes of hydrogen.

Published: December 2018.

Introduction

Figure 1. Atomic structure of Hydrogen, Deuterium and Tritium.

Based on Mr. Keshe’s Model of the "Universal Order of Creation of Matter", the Initial Fundamental Plasma is considered to be similar to the structure of the Neutron. On the other hand, the decay of the Initial Fundamental Plasma leads to the division of its content into the two components of an atom: the proton and the electron. In this process, magnetic residual plasma fields are also released, which can manifest in the form of light or energy. One proton and one electron form the Initial Fundamental Atom (which is the Hydrogen atom). Through the addition of one neutron, the Deuterium atom (denoted D or H2) is obtained, and by adding two neutrons, we reach the Tritium atom structure (denoted T or H3), as illustrated in Fig. 1. Deuterium and Tritium are the two isotopes of Hydrogen.

Free plasma of a Neutron contains the entire plasma spectrum. Therefore, Neutron plays an important role in the creation of any material, in production of energy, and for many other applications of plasma technology. Neutron production is facilitated by the field interaction between the isotopes of Hydrogen, which are the basic building blocks in plasma technology. This publication presents the reader with a simple, practical guide on how to produce GaNSes of Tritium, Deuterium, Hydrogen and Neutron.

Procedure for producing Tritium GaNS (H3)

Tritium GaNS (H3) has high magnetic field strength. It is a basic GaNS used for flight and in energy systems. In its physical state, Tritium is a Hydrogen isotope of atomic mass 3, containing two Neutrons and a proton. In the state of GaNS, Tritium is a plasmatic structure that behaves completely differently and shows no radioactivity, despite its name being misleading. What is achieved through the Tritium GaNS process, manifests in the plasma interactions only the structural properties of the Tritium atom. Even if the plasma formula is H3, it denotes only the plasma mass of this unitary structure. Tritium GaNS has a very strong magnetic plasma characteristics and is applied in the Keshe space flight technology.

Attention! Tritium, Deuterium or Hydrogen GaNSes can be integrated into plasma systems for processing various imbalances with a very high efficiency. However, one should restrain from applying these GaNSes in health application, unless they possess the required knowledge.

Figure 2. Usage of a champagne cup for CH3 Gans production.

Obtaining Tritium GaNS involves the use of a standard CO2 GaNS production kit, with a Nano-coated copper plate and a zinc plate, connected with an LED. It is advisable that the container used is fairly large and is made of glass. For example, one can use a parallelepiped-shaped glass bowl, or an aquarium with walls glued with a special carbon-free adhesive. The distance between the two plates in the CO2 reactor is about 12-14 cm. Inside this CO2 production box, at a distance of at least 4 cm above the water’s surface, above the level of the metal plates, an uncovered glass vessel is mounted, which is filled with the CH3 GaNS. For this purpose, one can mount some plastic hooks to the inner walls of the box. The vessel must not come into contact with the water in the production box! It ought to be positioned above the level of the metal plates, so that the plasma interactions between the two plates do not directly affect the processes in the suspended glass vessel. This glass vessel’s base should be large, so that the liquid in it is exposed over the largest possible area. It should not be positioned between the two metal plates, but above their level. It is necessary that the CO2 production box is tall enough, so that one can mount the glass vessel inside it.

To hold the CH3 GaNS, one can use a higher-legged glass (like a glass of champagne) that rests on the bottom of the reactor. Its leg should be tall enough to reach above the level of the metal plates – as depicted in Fig. 2.

The upper part of this CO2 production box is then carefully sealed, thoroughly separated from the atmosphere (for example, one can use a special carbon-free adhesive). The LED wire between the two metal plates remains inside this enclosed space. After about 10-12 days, in the glass vessel at the top of the reactor one can observe a yellowish or yellow-blue liquid, which is the Tritium GaNS (H3). Between the Nano-coated copper and zinc plates a plasma carbon field is formed, which like a magnet attracts the carbon field from the CH3 GaNS in the glass vessel. The liquid in the suspended vessel exhibits the characteristics of the plasma fields of Tritium (H3), forming the Tritium GaNS. Fig. 3 provides a visual representation of this process. This procedure, in which plasma is extracted from a plasma component such as GaNS, is called plasma reduction. This is possible due to the special properties of GaNS materials, which are actually a condensation - a manifestation of plasma in physicality.

Figure 3. Tritium GaNS production.

The reason for not using plastic or polypropylene vessels or carbon-containing adhesives in the Tritium GaNS production are as follows. The plastic contains in its formula Carbon and Hydrogen (the chemical formula of polypropylene is (C3H6)n). These elements can interfere, by feeding the plasma processes which take place in the reactor. If one uses a plastic box (polypropylene), as it is commonly used in GaNS production boxes, for example in the CO2 GaNS production, fields of Carbon from the plastic walls of the reactor are extracted next, after all the carbon in the air is processed. This delays the process of obtaining GaNS of Tritium. With the extraction of carbon from the adhesive, one can discover a rapid degradation of its performance, resulting in leaks. It should be noted that CH3 GaNS is not always completely transformed. A small part of it usually remains in the GaNS’ vessel, mixed with Tritium GaNS.

Advice: The GaNS should be stored in hermetically sealed glass vessels. The best commercially available, are glass bottles with glass cap and rubber lining.

The plasma of Tritium GaNS has a much higher magnetic plasma strength than the CH3 GaNS and an extraordinary area of coverage. One can amplify the reduction process by using a DC power source between the Nano-coated Copper plate and the Zinc plate.

Procedure for producing Deuterium GaNS (H2)

Deuterium is a Hydrogen isotope which has one neutron and one proton in its nucleus, and atomic mass of 2. Deuterium GaNS is considered to be the "base building block" in the Keshe space flight technology. Throughout the Universe, one can find magnetical-gravitational field packets with the strength equal to the one of proton’s, neutron’s and the electron’s, which can be ‘captured’ to produce Deuterium - considered as the "fuel of the future". Under certain conditions, Deuterium GaNS can form diamond crystals during the drying process (by coupling 6 atoms of Deuterium).

This GaNS has a neutral characteristic, it can play either a magnetic or a gravitational role, depending on the system in which it is integrated. It’s black in color and if prepared correctly, Deuterium GaNS interacts with magnets. It interacts with the magnet because it origins from the CH3 GaNS, which is produced with the aid of a galvanized iron plate. 

Because it is made in the plasma condition of the iron element (or in another words, it is "in the iron's plasma field strength") it inherits certain plasmatic properties of iron). Deuterium GaNS is black or yellow.

Attention! Do not use Deuterium GaNS in medical applications unless you possess the required knowledge.

Figure 4. Deuterium GaNS production. 

The first method for obtaining Deuterium GaNS involves using a standard CH3 GaNS production environment. Inside the GaNS production box, above the water level (the same way as in the procedure for obtaining Tritium GaNS), place an open glass vessel with the CH3 GaNS and close the reactor hermetically. Plasma processes in the CH3 production box, form a kind of special "magnet" for both, the Carbon element (C) and the Hydrogen element (H). Therefore, from the plasma structure of the CH3 GaNS, in the smaller vessel located at the top of the reactor, one Carbon and one Hydrogen atom are extracted. In this way one obtains GaNS of Deuterium (H2), in the iron's field strength. 

The second method for obtaining Deuterium GaNS is through the restructuring of the CH2 GaNS. To produce the CH2 GaNS one can use a CH3 GaNS production kit and connect a power supply between the two metal plates. Connect the Nano-coated copper plate to the (+) of the power supply and galvanized sheet electrode to the (-) of the power source. The electrical current used should not exceed 1.5 V and 50 mA. The obtained CH2 GaNS has a distinct black color. By extracting Carbon fields from the CH2 GaNS structure, we obtain Deuterium. This can be achieved in a hermetically sealed CO2 production box. Inside it, above the plates one can place an open vessel with the CH2 GaNS – Fig. 4. This procedure is similar to the one for reducing CH3 to the Tritium GaNS. The CH2 GaNS structure gets depleted from Carbon (C) and reduces to H2.

Figure 5. Deuterium GaNS production (#3). 

The third method for obtaining Deuterium GaNS is similar to the Tritium GaNS production, but this time one uses a ZnO GaNS production kit - a zinc plate and a nano-coated zinc. The glass vessel at the top of the reactor is filled with distilled water (H2O). Again, the entire GaNS production box needs to be hermetically sealed – see Fig. 5. 

When the Oxygen inside the reactor and in the air is exhausted, Oxygen from the distilled water gets pulled. This phenomenon is due to the fact that submerged in the plasma fields of this reactor, the distilled water is in the plasma state and will behave just like a H2O GaNS. The remaining Hydrogen forms the Deuterium GaNS, which can be confirmed visually as the distilled water gradually acquires a black color. The process of two atoms of Hydrogen bonding into a Deuterium structure is depicted in Fig. 6.   

A very interesting application of the later reduction method (#3) is to reduce (in the ZnO2 box) the CO2 GaNS to the GaNS of Carbon (C). 

The fourth method involves the use of three dynamic reactors with spherical containers filled with different proportions of the Tritium (H3) GaNS. Through the plasma interactions between the three reactors, reduction of the H3 GaNS in one of the reactors leads to Deuterium GaNS, in the other reactor reduces to Hydrogen GaNS, and the last one remains Tritium.

For Deuterium GaNS collection, use a needle syringe. Remove the reactor’s cap and with the syringe needle collect the Deuterium GaNS. Take a sealable test tube, open it and with the syringe needle inject the Deuterium GaNS into it; seal the tube.

Attention! Store this GaNS in hermetically sealed containers/tubes, which can be Nano-coated for an optimal result. Contact with the atmosphere can affect this GaNS as it interacts strongly with any plasma field in its environment. 

Tritium GaNS and Deuterium GaNS are one of the most powerful sources of energy in plasma technology.

Figure 6. The two Hydrogen atoms in the CH2 GaNS structure, form a stable Deuterium structure, through the fusion between an electron and a proton.
Figure 7. Deuterium (H2) positioned between South and North poles of two magnets. 

Magnets and H2 Deuterium GaNS through its affinity to Iron, can be restructured via exposure to strong magnets.

1. Place some Deuterium GaNS between the North Pole of a magnet and the South Pole of another magnet (Fig. 7).  The environment of magnetic field circulation between the two magnets, extracts magnetic plasma fields from the Deuterium GaNS, some of which are lost to the environment. Following this extraction, Deuterium loses one Hydrogen atom and H2 reduces to a single Neutron.

Figure 8. Deuterium (H2) positioned between two North poles of two magnets.

2. Placing some Deuterium GaNS between the two North Poles of two magnets (Fig. 8), results in a concentration of energy between the two magnets. This presence of fields ‘fuels’ Deuterium with magnetic fields, so that it gains a Neutron and turns into Tritium. In this process Tritium GaNS is gradually produced.

Figure 9. Deuterium (H2) positioned between two South poles of two magnets.

3. Placing some Deuterium GaNS between two South Poles of two magnets (Fig. 9), triggers a powerful energy extraction process, in which Deuterium loses one atom of Hydrogen to become a Neutron. 

Similar processes occurs in Hydrogen or Tritium GaNSes placed between different configurations of the two magnets. Thus, a fifth method of producing Deuterium GaNS is through the restructuring of the Tritium GaNS between the two South Poles of two magnets, or between the South Pole and the North Pole of the magnets.

Figure 10. Hydrogen GaNS production.

Procedure for producing Hydrogen GaNS (H)

To produce the GaNS of Hydrogen, one can start with CH2 GaNS, placed in an open, glass vessel (Fig. 10). Place it inside a hermetically sealed CH3 GaNS production box. This CH3 reactor functions as a magnet for the C-H atoms in the CH2 GaNS structure and CH2 reduces to the Hydrogen GaNS, which is blue in color. Keep in mind that often some CH2 GaNS remains in the vessel, mixed with Hydrogen GaNS.

Attention! Do not use Hydrogen GaNS in medical  applications unless you possess the required knowledge.

Advice: These three GaNSes should always be stored in hermetically sealed glass containers, otherwise they gradually return to the structure of the raw material from which they were obtained (CH3 GaNS). Very practical are the glass jars with a rubber cap and glass lining.

Procedure for producing Neutron GaNS

The difference between atoms of Hydrogen and Deuterium, as well as the difference between atoms of Deuterium and Tritium, is a single Neutron. Hence one can obtain the plasma of a Neutron by facilitating plasma interactions between these pairs of GaNSes. 

However, it is necessary to keep in mind that Neutron plasma obtained in the interaction between Deuterium and Tritium differs from the one obtained in the interaction between Deuterium and Hydrogen.

An example of such a plasma Neutron capture reactor is a dynamic, multi-core reactor made up of three balls of different size (one inside another), rotated by a motor. For best results, these spherical containers should be made of glass. The largest ball is filled with a certain amount of Tritium GaNS in a distilled water salt solution. The middle ball placed inside it, is filled with distilled water salt solution. Inside the middle ball goes the third (smallest) ball, loaded with Deuterium GaNS, again in distilled water salt solution. Neutron plasma gets captured in the distilled water salt solution of the middle ball. Salty water is the best Neutron capture medium because it slows down the plasma fields to their matter state. This Neutron capture is at the plasma energy level.

However, it is necessary to keep in mind that the Neutron is very unstable. In plasma interaction with other Neutrons, it easily decays into a proton and an electron, thus radiating plasma fields. As a result, Neutrons form Deuterium, Tritium or other new elements. The results depend on the plasma environment we create for these processes, and one of the essential factors in creating this environment is our own conscious intention, the energies we engage in from the Soul level in this process.

Neutron is the initial, fundamental plasma. The Neutron plasma field is at the basis of plasma technologies for producing any type of material, depending on the condition of the plasma and the intensity at which the Neutron is created. Hydrogen, Deuterium and Tritium GaNSes, which are used in the Neutron fields’ production, are sufficient to produce any element found in this Universe. All applications of plasma technology are within reach but only through the correct use and understanding of the Neutron plasma field.

References

Original submission link: https://www.dropbox.com/s/bc3y1zwnismuwvs/Procedure-for-producing-special-GaNSes-rev.docx?dl=0 

The impact of CH3-GANS on the ph-level of tap water measured inside plasmatic fields, created by a plasma ball unit

by Klaus Priller, Herbert Bloder, S.P.    

Keywords: pH, water, alkalinity, plasma ball unit, PBU.

Published: October 2018.  

Laboratory studies were performed to determine whether CH3-GANS of different states of matter in spinning reactors in combination with other GANSes have the potential to increase the pH-value in a glass of tap water inside a dynamic system, called Plasma Ball Unit. As a result, it could be shown, that there is a strong impact of CH3 GANS on the pH-level. Depending on the physical state of the CH3-GANS, an increase in pH-level of up to 1.14 points in 24h could be measured. Several repetitions of the experiment underlined this result.

Introduction

The plasma ball unit (PBU) is a device, invented by Mehran Tavakoli Keshe. The PBU mainly consists of several spheres (balls), which are mounted on motors (dynamic systems) and therefore rotate at a certain speed. Inside the balls, different types of GANSes in different physical states can be placed. The combination of above described dynamic systems creates a “plasmatic field”, which influences the matter inside these fields. In the current study, the influence of the fields of the PBU on tap water is the main focus.

GANS is a new state of matter, discovered by M.T. Keshe. It is the abbreviation for GAs to Nano of Solid. In this state of matter “a molecule of GAs which becomes Nano of itself […] becomes and appears as Solid state of matter” (Keshe, 2012, p. 144). As a result, GANS carries the field spectrum of a gas. This field spectrum affects both “physical material or the property of different matters” (Keshe, 2012, p. 148). The process of producing different types of GANS is well described by the Keshe Foundation and is not part of this paper. We were producing the GANSes as it is described by the Keshe Foundation. In this study, we focus on (1) GANS as precipitate in GANS-water and (2) GANS in a dry state.

Materials and Methods

In this study, we focus on a combination of the GANSes CO2, ZnO and CH3 in the aforementioned, two states of matter. The following experimental setup was introduced: 

Experimental constants where (1) the dynamic systems (rotating GANS-balls), filled with CO2 and ZnO precipitate in distilled water, (2) the distance between all dynamic systems used, (3) the rotation speed of all dynamic systems (4.800 rpm), (4) the source of water, (5) the temperature in the room and (6) the starting-time and the time-span of measurement.

The independent variable in the experiment was the dynamic system, filled with CH3 of the following states of matter: (1) CH3 precipitate in distilled water (4ml distilled water and 0,5ml settled precipitate), (2) Dry CH3 powder (2mg) and (3) Dry CH3 powder with an inner ball, filled with high gravitational gold GANS (2ml).

The dependent variable in the experiment was the pH-value of tap water in 4x100ml container, fixed on a carbon fiber holder in different positions. The starting pH-value was 6,6.

In Figure 1, you can see the experimental setup, the position of the dynamic systems, the position of the water container and the position of the sensors for measuring the pH-value and the temperature of the water.

Figure 1: Plasma Ball Unit (PBU).

As one can see in the experimental setup, there is no “physical” contact between the dynamic systems and the water inside the PBU.

As control variable, the holder, including 4 containers of the same tap water, was placed outside the PBU and the pH-level was measured the same way. The control variable is therefore the pH-level of the same tap water but placed outside the PBU.

To sum up the experimental setup, the independent variable (dynamic system with CH3) was changed 3 times and the impact on the depend variable (pH-value of tap water) was measured. Everything else (constants) remained the same.  This was controlled by the same tap water outside the PBU.

Measurement procedure

The depend variable was measured by a PCE-PHD Data Logger, applying a pH-electrode PE-03 and a temperature sensor. Before using, the pH-sensor was calibrated, using a certified pH7 calibration liquid:

Figure 2 shows the holder, which places the two sensors inside the water container. 

Figure 2: Location of the sensors.

Before a measurement, the PBU was switched off for 45 minutes. During this time, the water containers where filled and the sensors positioned. The experiment started at 2pm every day and lasted 24h.

Results 

In the first experimental setting, the CH3 system was filled with GANS-water and GANS precipitate. The results from the data-logger, shows a steady increase of the pH-value from 6.6 to 7.62 in the first 24h (Figure 3).

The curve has a slope of 0,0036 The curve seems to flatten at the end, so it can be assumed that the pH-level will increase but with a different slope. 

Figure 3: pH-level increase of GANS-water + precipitate filling.

In the second experimental setting, the CH3-System was filled with 5g dry GANS-powder. As a result, the analysis of the data shows, that the maximum pH-level after 24h is 7,72, the slope of the linear trendline is similar to experiment 1.

In Figure 4 the curve does not flatten at the end, therefore we can assume, that the pH-value increases by the same slope after 24h. 

Figure 4: pH-level increase of dry GANS filling.

The third experimental setting, where an additional gravitational inner ball was placed inside, showed nearly the same results as experiment 2, the maximum pH-level after 24h is 7,74, as depicted in Figure 5.

Figure 5: pH-level increase of dry GANS filling with inner gravitational (Gold-GANS) ball.

After 48h, the pH-level was measured again, and it showed a value of 8,30.

The experiment shows that the pH-level of tap water can be influenced by placing it within plasma fields, created by rotating dynamic systems. Figure 6 shows all three curves of experiment setups 1, 2 and 3 above each other: 

Figure 6: pH-level increase of experiment 1, 2 and 3.

Although all three curves are very similar, the first experimental setting reaches the lowest pH-level and the curve seems to flatten at the end. During the first hours in the PBU, we can observe, that there is a drop in the pH-level of experimental setting 1 in the first 30 minutes. The other settings have similar growth during the same time - as compared in Figure 7.

Figure 7: pH-level in the first hours.

As there is no physical contact, this influence is attributed to the fields created by the dynamic systems. Therefore, it can be shown, that the fields, created by GANS-reactors, influence matter. Further research will be conducted by changing the different GANS ratios in the dynamic systems.

The human body consists mostly of water.  There are different pH-values in different parts of the body. As the plasma fields have no barriers, they will flow through the human body and will, most probably affect the pH-value of the human body too. Further research needs to be completed in this topic.

Klaus-exit.png

References

Keshe, M.T. (2012). The Structure of the Light. Second Edition. Stichting the Keshe Foundation: Netherlands.

Making Plasmatic Fields Visible and Measurable

by Christian Böttgenbach, Student at KF SSI Education, Feb 2018  

Text also available in German.

Keywords: measuring GANS, differentiating between GANSes, field strength.

Published: July 2018.

Objective

This is the description of a method to make visible, compare and measure plasmatic (MaGrav) fields, as requested by the Keshe Foundation. It is an ongoing study, the results encourage me to share the method used and some of the results at this early stage. I want to set up a database to be able to show, determine and measure the plasmatic fields of GaNS. I use a method of creating rising pictures through a capillary-dynamic process, that has been developed by W. Hacheney.

Method

Any sample will release its fields with help of water into a suitable filtering paper during a capillary-dynamic process. This happens, because the fields can create micro-motion in matter state fluids, if the fluids are in an open state of matter, GaNS-like. Usually we do not see this motion created by fields, but when absorbed instead of pressed, fluids, especially waters, will freely release the fields they are carrying, in shape of micro-motion, to another medium. In this special setup this motion of the water is being braked, when it is absorbed through capillary diameters of 2 micron or less. We use metal salts to colour this otherwise invisible process. The metal salts are released, where the micro-motion slows down, giving us an exact copy of the field-induced motion of the carrier, the water.

History

Wilfried Hacheney developed and used this method to determine morphology and powers (MaGrav fields) behind the substances he has been working with as an engineer. He made about 150.000 images this way. I was taught by him how to create and analyze the resulting images. His invention corresponds to earlier developments by E. Pfeiffer, W. Kaelin, L. Kolisko and others, going back to hints by R. Steiner about 100 years ago. A more recent dissertation by Aneta Zalecka (Uni Kassel, 2006) reveals, that even the older methods of creating rising pictures are valid scientific methods, concerning comparability and evaluation of the quality of food. We met her in her lab to watch her work and discuss results.

Preparation

Materials
Kaelin Petri Dish
Kaelin Petri Dish

- Get Kaelin petri dishes (amorphous glass) with a rise in the middle, for the fluids to gather in a ring close to the outer rim. They can be bought at “Forschungsring Darmstadt e.V.” in Germany.

- Buy argentum nitricum (2%) and ferrum sulfuricum (2%) as well as a pipette and small bottles with pipettes for dispensation of equally sized drops. You can probably get that at your local pharmacy.

- Have gloves ready, otherwise you might create an image of your DNA. I use simple disposable latex gloves. 

- Find suitable filtering paper. I use a special paper, 100 gr/m2, ca. 200 micrometer thickness, with an opening of 2 micrometer or less. My paper had been developed by Mr. Hacheney, until now I did not find anything matching its quality. I am working on that with Hahnemuehle, one of the most renowned producers of filtering and technical papers. The paper is the most important ingredient for the creation of these images. Without the right paper you might still get some pictures, but no clear, measurable shapes and relations. Blotting paper and orthochromatic paper will not work sufficiently.

- Use neutral water, it is needed as a reference and a carrier substance. All fields carried with the water will influence the images. Keep magnets, crystals and all “water-guru” stuff away from it. I use distilled water and additionally I try to bring it into the best state to be able to transfer the fields into the filtering paper. Our breath can teach us there: 

The water droplets in our breath are about 2 micron in size, creating a huge surface of about 300.000 m2 per liter. This way the fields can easily be taken over by the water. I use a “levitation device” to move the water very fast ( 6x speed of sound), without pressure, into a special shape, to open it up into these small droplets. Existing fields carried by the water are being erased during that process. The water will be in the same state, have the same “inner surface” (if you add the surfaces of the micro droplets), as we have in our breath. Of course, you can do without that machinery. I just explain it to add to the knowledge and to offer an idea, what your soul might wish, when preparing the water. Cooking also helps to increase the inner surface of water and to erase some fields.

- A scanner would be handy to document the results. I scan the images with 2400 dpi, raw format and without backlight. It would be better to use a backlight to also acquire the faint shapes below the surface of the image.

No image processing at scan time recommended. Some software like “riot” to resize the images and “ImageJ” for filters, measurement and evaluation might be helpful afterwards, both are free

Setup
Method of creation (W.Hacheney)
Method of creation (W.Hacheney)

- Create an environment with little disturbances from all kinds of fields and radiation, including direct light, because they might influence the process. The results are also slightly influenced by the fields of daytime, earth, phase of the moon, planets and stars. For best results, 20° Celsius and 50-60% humidity are preferable. Small deviations might result in slight changes of size and colour but you will still create a useful image.

- Cut the filtering paper into sheets of 167 by 167 mm. Then make an extra cut, 25 mm from one of the borders. Bend the paper to a tube and bend the extra snippet away or cut it off, like I did on the picture. Attach a stainless paperclip to keep the paper in shape. If you use something else than a Kaelin petri dish, check the size of the paper you need beforehand.

- As it is a sensitive process and we have the same fields within ourselves, that we are creating images of, be aware of your emanations. It would be advisable to be in a balanced mood.

- Label the paper with the sample used and date of creation. Place the clean Kaelin petri dish, dispense up to 3 drops of GaNS Liquid (depending on the material to be tested) into the ring and add 4 drops of water. I use distilled and levitated water for neutral and powerful results. It might be necessary to create images of your water also, as a reference. Actually, you can examine anything this way, be it

fluids like blood (use only one drop of blood), saliva, juices from plants or hard materials or even emotions, if you add them to a fluid like water.

- Then place a suitable filtering paper, prebent to a tube, into that dish, so that it absorbs the liquid at the bottom. The orientation of the gap should be to the north.

- After about 20 minutes add 4 drops of silver nitrate solution (2%) and 3 drops of distilled water and put the paper back into the petri dish. Always check the orientation.

- After another 20 minutes add 3 drops of ferrum sulfuricum (2%) and 4 drops of water, same procedure.

- After 20 minutes again, add 2.5 ml of the water (preferably distilled and levitated) and then let it dry for about 12 hours. Remember to keep the image protected from direct light until it is dry.

- Then give it some light, diffuse daylight is fine, for development of the colours, for about one day. If you are testing other substances, it may take several days to develop them. Although sulfur stops the development of the silver, the pictures may become a little darker and loose some sharpness over time. Images may also change over time according to the state of the origin of the sample. I scan them, when they are ready.

Methods of observation

The best way to observe the results would be a light box, because when observing just the surface of the paper, some faint structures will remain hidden. Placing images on a window (daylight) works very well, too. Otherwise you might want to use scans of the image, which allows to enlarge them easily. I got a special pair of compasses (Relationalzirkel) from Mr. Hacheney. He told me to pay attention to all shapes and compare their relations to each other with it. It is also possible to measure and compare everything else, the most easy thing to start with is the height of the images. All GaNS images I created until now, show a different height, depending on the GaNS used as a sample. CH3 images build up about 10% higher than CuO2 images. The most important element of all observation is unbiased perception. Do take your time to repetitively watch an image without any assumptions, until it starts to reveal its secrets. The more images you have seen, the faster and easier important correlations can be found. Gain experience, reading the pictures really is an imaginative process.

The main reason to choose this method is its exactness, you can literally see everything in these images, if you have learned to read them. I am still at the beginning but would like to mention an example of exactness, that I experienced with Mr. Hacheney: When I gave him an image of my saliva, he looked at it briefly and told me that i have got two dead teeth. I only knew of one and I could not even see specific teeth in the image then. The other day I went to a dentist and it turned out that he was right. But it was far more, what he told me about my teeth, about certain weaknesses and strengths, what will happen to them and how to bring balance and health to them. What he could read out of an image of my blood, was even more astonishing, because he could see very specific things, that where going to happen in future. This is not a miracle, because every process initially occurs in the fields, before it manifests in matter state. Knowledge seekers know that anyway.

As a child, I was in a lucky situation, like Mr. Keshe, having a father that was dealing (literally) with X-ray films. My father also sometimes had to teach physicians how to read their images and he showed some at home. Also I studied eurythmy, which helps me now to understand the characteristics and qualities of the movements of the fields, which we can see in the rising pictures. Everyone has his own background, even more so it is desirable to find some kind of classification and standardization for this process, so we can compare, determine, practice and understand, wherever we are.

Basic classification

I created several series of images of CO2+ZnO, CuO2 and CH3 GaNS. I will only show one of them, all 3 images were created simultaneously. Before we can compare them, we have to find a rough classification. Enlarge the pictures and perceive them. Take your time!

Co2-cu0-ch3.png

The images contain several obvious elements:

- A brownish upper horizon with a special thickness, amplitude, curvature and intensity.

A second, blurred, grayish horizon, with clear differences in thickness and intensity, interrupted by vertical cylindrical pipe shapes.

- The pipes themselves, they seem to be 3-dimensional, at least. They strongly differ in many aspects, depending on the GaNS Liquid used as sample.

A closer look will reveal many more elements. Directions, relative angels, rotations, opacity, convexity and concavity as well as repetitions, sizes and amplitude can be taken as separate elements. This work is still in its initial stage. We will continue with a simple examination of the upper horizon and the pipes.

Short examination with details of images

CO2/ZnO
CO2/ZnO
Look at the brownish horizon. This sample shows an astonishing horizon there, because it has a lot of twin hills, and also alternately bigger and smaller hills. At some places, this horizon seems to fade away from below.
CO2/ZnO
Many of the pipes show up in pairs that seem to correlate.

They regularly touch the upper horizon. Some of the darker pipes stay open at their top, where they touch the brownish horizon. Some of the single, thin and less coloured pipes seem to prick the horizon with their thin peaks.

CuO2
CuO
Here we find an irregular-shaped, rather thick horizon, with hills pointing into different directions and deep, in part narrow valleys. Below it there is a very faintly colored region.
CuO
The pipes are mainly closed quite flatly at their almost colourless top, way below the brownish horizon. They are rather short and weak, unable to push through the greyish, weak belt. In many cases the colour surrounding the pipes seems to be stronger than the border of the pipes themselves. The detail images can be enlarged CH3
CH3
Here the brownish horizon is being superceeded by the pipes from below. It is strong but not independent, rather irregular and with a low amplitude. Observing the meandering grey lines from below shows an otherwise hidden structure that may help us to understand, how the brownish horizon is being created in general.
CH3
Now these are many, big, strong and dark pipes. None of them ends at the brownish horizon or below, instead, they all stay open at their top. We can see some brownish color in the greyish layer here. Look at the structures surrounding the pipes and branching out of them. Try to imagine direction, rotation and energy of the fields at the point of creating the image.

Comparing the results

Comparing the images will give us insight into the possibilities of rising pictures in general and it might also help to understand the characteristics of specific plasmatic fields. The first impression I want to mention here is the (at least) twofold character of the CO2/ZnO image, which can be observed in particular there. Until I have pictures of clean CO2 and ZnO apart from each other, I have a presumption: I believe, that we can see the single components of the fields of at least CO2 and ZnO there, although we learned from Mr. Keshe, that the resulting fields become a single entity. I expect, that this method allows the analysis of the combined fields and the strength, quality and even percentage of its components.

When comparing this CO2/ZnO image with the CuO2 image, we can clearly see a difference in field strength. The CuO2 image seems to be attached to the ground, probably due to more gravitational fields, compared to the environment. This would underline the importance of neutral water, that we use as a carrier. I tried to make images, where I replaced all water with the GaNS Liquid of the sample. The resulting images still allow a recognition of the kind of GaNS used, but are by far less significant. When comparing the CuO2 image with the CH3 one, we see the greatest difference between all images shown so far. The image shows a strong push upwards, or is it sucked upwards? Or even coming down from above? What do you feel about that? Some of the pipes seem to open up, becoming wider at their top. CH3 we characterize as a giver of energy and it is known to be an Magnetical GaNS. It seems that my GaNS meets this description. More tests with same kinds of GaNS from different sources have to be done.

So-1-2-new12.png

Special observations

There is a strange component at the right rim of the CH3 image, that does not seem to fit in there. Look at this strange Pipe with that little finger with fingernail in it. Something like this did not repeat in any of my images of GaNS. Still this did not happen accidentally. Look at the bottom of the picture section, two impurities can be found there. They had been on the paper before, and I do not know, what they consist of. When we really learn to read the images, we will know. I placed that here to demonstrate the exactness and beauty of the conversion of any plasmatic field into a picture.

To the right, we see a detail from the center of the CO2/ZnO image. I am stunned every time I look at that shape. Can you follow the tender movement of the semitransparent veil, do you feel the harmony of it, can you see the picture of a madonna with her child? How many dimensions does it reveal? Let it talk to your soul!

A surprise  

While watching the GaNS images, I had to think of amino-acids and that Mr. Keshe taught us, that they form the most beautiful star formations. This is what happened when I created an image of my ZnO amino-acid:

Surprise-1-2.png

Above: Faint suns in the brownish horizon and below in the grey region.

Below: When really zooming into that same image, these structures appear. None of the GaNS images contain anything alike: Lots of little star-formations!

Surprise-3.png

Special observations

When I saw this, I knew it is time to come forward and share, what I found

Conclusion

Although still at the very beginning, I believe to have found a valuable method to make plasmatic fields visible, comparable and even measurable. In contrast to other methods like crystallization, nothing is forced here, the fields release themselves freely, as if they want to teach us. There is a lot of work to be done. Many images, more classification, measurements and many comparisons have to be performed to add to our knowledge. The method is flexible, low cost, significant and very powerful. It has the potential to become a standardized evaluation instrument for GaNS and plasmatic fields. I will call it “Plasma imaging”, unless otherwise advised by Keshe Foundation.

References

All references refer to older methods of capillar dynamolysis or rising pictures, except the audio recording from W. Hacheney. The older methods are more sensitive to disturbances and give less exact but still sometimes very beautiful results.

Wilfried Hacheney, 13.3.1924 – 20.4.2010. Some of his works: Organische Physik. Aufsätze, Michaels-Verlag (Dezember 2001) 

Der Weg – Der Mensch vom Geschöpf zum Schöpfer Wasser, Wesen zweier Welten. Michaels-Verlag (Dezember 2003)

Audio recording on “rising pictures” 2004/09/10, Kassel

You may also want to do a research on his patents here: https://www.dpma.de/recherche/

Friedrich Hacheney, Hyper-Wasser: Wasserenergetisierung nach Hacheney, 2014

(Wilfrieds son) Levitiertes Wasser in Forschung und Anwendung, 1994

Recent scientific works:

https://hds.hebis.de/ubks/Discover/EBSCO

lookfor=steigbild&type=allfields&service=combined&submit_button=Suchen

https://www.iol.uni-bonn.de/forschung/publikationsliste

http://kobra.bibliothek.uni-kassel.de/handle/urn:nbn:de:hebis:34-2007021417189

http://www.christall.nl/page/en/Capillary+Dynamolysis

https://www.biodynamics.in/chrom.htm

http://jbpe.ssau.ru/index.php/JBPE/article/view/2470

https://anthrowiki.at/Steigbildmethode

http://www.biodynamic-research.net/ras/rm/pfm

https://ledepotesta.wordpress.com/2016/01/20/

koliskos-agriculture-of-tomorrow-pt-2/

http://www.vivendasantanna.com.br/artigos/trabalhos2/36-dinamolise-capilar-de-kaelin

http://archive.is/XHdyz (Meaningful references can also be found here)

http://archive.is/XHdyz#selection-281.0-293.627

http://www.academia.edu/28144942/Standardization_of_the_Steigbild_Method

https://www.lichtfragen.info/de/studien/forschung-und-studien.html

Health

Viruses: The Energy Packages of the Universe - Herpes Simplex Virus

by Mehran Tavakoli Keshe, Founder of Keshe Plasma Science and Technology for Space Applications

Keywords: HSV, HSV-1, HSV-2, dream, emotions, virus, fear, mouth.

Published: January 2019.

Introduction

The Keshe Foundation introduces new solutions through the teaching and development of the science of plasma technology. Such solutions are simple and harmless to any organism inhabiting this planet. One of the biggest threats to humanity (and to other forms of life) are viruses, and one of the most prevalent one is the herpes simplex virus (HSV). HSV, or herpes, is categorized into 2 types: herpes simplex virus type 1 (HSV-1) and herpes simplex virus type 2 (HSV-2). Statistically, it is estimated that in 2012, over 67% of the World’s population (3709 million people, range: 3440–3878 million) aged 0–49, had a prevalent HSV-1 infection, which usually appears on the mouth, around the lips (Table 1). 

An estimated 417 million people aged 15-49 (11%) worldwide have HSV-2 infection1. Most oral and genital herpes infections are asymptomatic (showing no symptoms). Hence, many people are not even aware they carry it. This lifelong condition, like many other viruses known to mankind, is incurable and scientists report its relationship to other health conditions such as Alzheimer (Lövheim H. J., 2015). However, the origin of it and the exact mechanism of its working, as this is also the case with many other viruses, remains a mystery to the modern medicine. 

This publication explains the origin of the HSV virus and how it develops in the human body – starts from the soul and the brain through the process of dreaming and ends where it started - in the brain. The role of the skin, which in the understanding of the plasma science is an extension to the human brain, is described. The transition and mutation of the virus occurs as it travels through the digestive system to reach its other end – the anus and genitals. The herpes virus also nests in the hip of the man. Doctors and scientists cannot solve it, as its complexity and mechanisms have never been fully understood. Whatever therapy is applied, the virus eventually comes back. When its energy reaches a tipping point, it releases the energy back into the same layers and one has a flaring of the disease. 

In general, herpes is a totality of the disease across the body of the man. This changes the approach and herpes with this new understanding of the Keshe Plasma Science and Technology are manageable, are reversible3. The proposed procedure, which covers the entirety of the body, is proven to be effective and subsequent tests and clinical trials are needed to quantify it further. 

Background

Table 1: Global and regional estimates of the number of existing (prevalent) cases of HSV-1 infection in 2012 by age and sex, in millions (percentage of the population with prevalent infection shown in parentheses)2.

One of the biggest menaces to the human race is the herpes virus. The understanding of the modern medicine is that HSV-1 is transmitted by oral-to-oral contact to cause oral herpes, which can include symptoms known as “cold sores” but can also cause genital herpes. HSV-2 is a sexually transmitted infection that causes genital herpes. Both HSV-1 and HSV-2 infections are lifelong. According to (Davis, 2018), these two viruses have distinctly different DNA, and both cause oral and genital lesions. However, HSV-1 causes about 80% of all oral lesions and only about 20% of genital lesions while HSV-2 causes the reverse (about 80% genital and 20% oral).

Oral herpes infection is mostly asymptomatic, and most people with HSV-1 infection are unaware of it. Symptoms of oral herpes include painful blisters or open sores, called ulcers, in or around the mouth. Sores on the lips are referred to as “cold sores.” Infected person will often experience a tingling, itching, or burning sensation around their mouth, before the appearance of sores. After the first infection, the blisters or ulcers can periodically recur.  

The frequency of recurrences varies from person to person. Genital herpes caused by HSV-1 can be asymptomatic or can have mild symptoms that go unrecognized. When symptoms do occur, genital herpes is characterized by one or more genital or anal blisters or ulcers. After a first genital herpes episode, which may be severe, symptoms may recur, but genital herpes caused by HSV-1 usually do not recur often. Herpes infections are most contagious when symptoms are present but can still be transmitted to others in the absence of symptoms. Antiviral medications, such as acyclovir, famciclovir, and valacyclovir, are the most effective medications available for people infected with HSV. These can help reduce the severity and frequency of symptoms but cannot cure the infection1

Figure 1: Herpes Simplex Virus Type 1 Infection.4 

According to the WHO’s website1, “in immunocompromised people, such as those with advanced HIV infection, HSV-1 can have more severe symptoms and more frequent recurrences. Rarely, HSV-1 infection can also lead to more severe complications such as encephalitis or keratitis (eye infection)”. The same report warns pregnant women that “neonatal herpes can occur when an infant is exposed to HSV in the genital tract during delivery. This is a rare condition, occurring in an estimated 10 out of every 100,000 births globally, but can lead to lasting neurologic disability or death.” 

Many researchers notice and investigate the causal relationship between the HSV-1 virus and Alzheimer’s disease (AD). Work presented in (Bearer, 2013) concludes that the author in their study “… satisfied Koch’s 3rd postulate: the HSV causes Abeta deposition that would in concert with other factors lead to an AD-like pathology”. In June 2015, Swedish scientists in (Lövheim H. J., 2015) concluded that “Among persons with a follow-up time of 6.6 years or more, HSV infection was significantly associated with AD.” 

Other works presented similar evidence (Piacentini, 2014), (Lövheim H. J.-G., 2015), (Agostini, 2016) and most recently (Itzhaki, 2018) who points to evidence in literature that apart from AD, HSV is also linked to senile dementia and that “… antiviral treatment causes a dramatic decrease in number of subjects who later develop SD ”. Furthermore, Itzhaki in the same work, concludes that “three indirectly relevant studies deal respectively with schizophrenia, relating to antiviral treatment to target HSV1, with the likelihood that HSV1 is a cause of fibromyalgia (FM), and with FM being associated with later development of SD. Studies on the link between epilepsy, AD and herpes simplex encephalitis (HSE) are described also, as are the possible roles of APOE-ε4, HHV6 and HSV1 in epilepsy.” (Itzhaki, 2018).

It is one of the contributions of this publication to explain, from the plasmatic point of view, that HSV virus correlates with increased risk of neurodegenerative diseases such as AD as it appears in the body of the man. 

Viruses - the new understanding 

The genesis, evolution and the mechanisms of many viruses present on this planet, which trouble humanity, are not currently understood. Viruses are energy packages which have the DNA strength of the body of the man and in that process, they interact with it. The energy packages which have the strength of the soul of the man interact with the DNA of the soul of the man - they are a leech onto the leech (human body) and they become leeching onto the entire structure. 

Figure 2: The food tower. 

Viruses don’t have physical characteristics, they don’t have physical entity, but they have gravitational-magnetic field strength in part of their composition that matches one of the elements of the amino acid of the man (COHN); or it matches the elements that are connected to it, such as Iron in the blood, or Copper in the muscle, or Carbon, and the virus locks in. Once locked-in, it carries a massive amount of energy as it does not have a physical dimension. Virus in the plasma technology is a package of energy which mankind needs to understand.

In the space, humans will not die much of bacteria and infections, but will die of viruses – the energy packages without physicality. The present science has not managed to handle the simple viruses of this planet - those energy packages which have no physical dimensions to the amino acid, but they carry energies of the amino acid5. This aspect can be explained similarly to the food cup experiment, also known as the Orange Experiment, in which four basic GANSes and their amino-acids are placed around a glass container with water (Fig. 2). In a CO2 GANS production, the combination of materials of the air appears on the surface of the water as the amino acid (COHN), and when put in another tube, it becomes the basis of life. In such food cup, gravitational-magnetic fields are created, which pull down the gravitational-magnetic fields of the essence of the orange, or any other plant or substance, into the water. 

When the orange is placed on the top of the cup, the energy of the orange together with its taste is transferred into the water contained by the cup. Because this water has a protein base, it connects to the protein-based body of the man, so it feeds the body with the energy of the substance. In this transfer of the energy of the plasma, one receives all the attributes of the orange - the energy, the taste, the smell, everything. 

There is no need for the physicality of the orange, and when one drinks this water, it tastes orange. This confirms the energy transfer through the plasma structure and orange’s amino acids. For example, let’s assume that the Hydrogen of the orange’s amino acid is equal to the Hydrogen in the water of the cup, according to the mixture of the GANSes placed around the container. In the same way, viruses which are like this energy packed information contained in the water of the cup, leech onto human bodies. 

To the present world of science, viruses are a menace, for which there is no solution. Any virus, any entity which has a dynamic plasma, has a funnel. Every virus has a dimension of the dynamic plasma - it is a structured energy pack. The plasma structure of the CO2 GANS, or any other, is the same as the plasma of a virus - it has a strength capacity. As a first step, one has to find out what this strength capacity of the virus is. If one can measure its strength, then a system can be developed to work the opposite - gravitational to magnetical - to drain it, to reduce the virus’ strength or one of the factors of the strength in it, which for example, matches into the amino acid Hydrogen strength. With this new understanding all viruses are reversible.  

Herpes Simplex Virus - HSV

Genesis

Herpes originates from the brain of the man. It is caused by the release of the energy from the inner soul of the man touching the invisible memory part of the body of the man. While dreaming, one experiences various emotional states. If the dream is at the strength that endangers one’s life, if the memory of it is at the strength that can jeopardize the life or imprison the physicality, this is an event which one does not want to remember. Therefore, a field force in the balance of the memory of what is not to be remembered, is created. Because it is a dream, it has not manifested, and it remains a part of the operation of the soul of the man. 

The energy transfer appears on the part of the body responsible for the verbalization of the unexpressed feeling, which is the lip of the man and this explains why, when one has a very horrible dream, the blister appears on the side of their mouth. This is the beginning of the process. The energy transfer from the source (inner soul and the brain) into the point of destination (the lip) gets captured in the salty environment of the layers of the skin. Think of it as a CO2 box – two plates (one of the higher order) and the energy transfers through the salty water, to create a point of balance at the Carbon field strength to attract the Carbon from its environment. 

The full process of the creation of herpes comes from the inner structure (memories in the brain) and this is why it goes back to where it came from. Since it has no memory, it wants the brain to remember the initial horrible event or a nightmare. This is called the heating temperature of a dream. It does not matter where one is in the universe, or on this planet, they get it; because human soul is the creator of it. The dream does not find the physicality at the time when one is awake that their eyes can observe. If in a dream, one gets captured and wants to escape, such frightening situation often wakes them up. The energy of the memory of this dream cannot be memorized by the brain, as it was not observed by the eye, and because in their dream one cannot speak through their mouth which is the point of speaking, this is where the energy transfers6.

If one has a problem with their son, as a man they develop a prostate cancer. The paper titled ALS—A death wish which comes true7, describes yet another process, which directly originates from the soul of the man. ALS is a wish through the soul, which the physicality cannot handle – the ‘termination of contract’. 

Similarly, herpes is a condition created by the soul of the man but without the interaction of the physicality. Herpes goes back to where it came from (the brain), so that one remembers the dream, so that it does not happen to them. Now it is understood why herpes damages or interacts at the memory side, because one wants to forget a horrible experience. 

Mechanism

Every virus is an energy pack and it needs to be attached to an amino acid. Once it finds the energy in a structure which carries DNA, it can control itself, it can mutate to absorb more. It becomes a cell, a living entity. A virus looks for food to survive, it looks for energy to absorb. When it attaches itself to Mr. COHN8, it links itself either to the Oxygen - because it matches the gravitational field of it; or to the weakest element, which is the Hydrogen. It needs that match/connection, it finds that connection, but how does it enter the body of the man? It needs a weak point, it needs a point of entry. 

The lip and the skin

Figure 3: Lip - the entry point of Herpes Simplex Virus.

One of the points of entry for the virus are the lips. Herpes are usually observed in these regions, around the mouth, because this is where the space gap is. In Figure 3, the external part of the skin is marked with D; while C is the internal part, the sausage, the breathing part, the mouth. These two are two different structures. Area marked with B is the weak point in the structure, which can be compared to a woven chain. The same can be observed in Nano-layers – such open spaces, gaps between plasmas. It’s analogous to sewing two different materials together, such as leather and cotton, which cannot be perfectly put together, cannot be fused, because they are two different structures9.

Skin has three layers. Both, the internal part (C) and the external skin (D) have three layers. The bottom layers of each are linked up. But the three, the middle layers of the same salt content, because they carry the blood in the level of balance of it, they have a space gap. The layers are linked up, but they allow for the virus to come into this space gap and in this way, it finds a place to nest. Why herpes is usually observed in the corners of the lips? Because this is where the space gap is continuously fixed to one point, which moves when the mouth closes and opens. These points of flexibility are an entry point for the HSV virus, which then finds a nest. The virus enters into the middle layer of the skin and it stays there9.

HSV is an energy pack which is equal to the energy pack of the amino acid in the middle layer of the skin, which becomes a nesting-ground for the virus. Here we are considering a six-layered structure, not three - there are three layers of the skin and there are three layers of the inner tube. This structure has a gap in which the strength of the memory of the dream, matches the field strength of a virus and becomes its nest. The virus which sits in the middle section of the outer skin, affects its salt content. The change of salt due to the energy transfer creates blisters on the skin. This gap is created by the disorder - the breakup between two sides of the skin. When the blister opens up as the salt content changes, it is like an eruption. The skin erupts, and the gap is created between the two sides of the eruption of the skin. Then another infection that sits in because of the energy level and you have all these what we call the virus of herpes, we call it herpes. Due to the dynamic fluid condition in the mouth, blisters inside the mouth are not as frequent. 

This is why herpes of a given strength (HSV-1) appear only at the mouth. If herpes moves inside, it is a different story. The conditions in the mouth are different than in the skin - different acidity of all the enzymes and presence of other elements. Thus, the virus has to mutate to become stronger, that it can survive in these conditions. Through a cut in the internal skin of the oral cavity, the virus can enter the gap of the three layers of the oral mucosa. Some mucous membranes secrete mucus, a thick protective fluid. The function of the membrane is to stop pathogens and dirt from entering the body and to prevent bodily tissues from becoming dehydrated (Encyclopedia Britannica Inc., 2018). In order to survive in these conditions, the virus mutates and becomes stronger, it becomes HSV-2. The strength of the herpesvirus-2 is capable of coping with the composite liquids inside the body of the man, whereas the skin was slightly different. 

Figure 4: Cross section of skin and mucosa under the microscope: Normal Epidermis and Dermis with Intradermal Nevus (left); Histological section taken from the gastric antrum, showing the mucosa of the stomach (right).

The brain

In the human body, and this holds for all animals, the skin is a part of the brain. It is an extension of the brain. When the HSV virus enters the middle skin, it immediately travels into the brain of the man through the middle skin. Equivalently to the lip, where the layers of the external skin link up with the layers of the internal skin (mucosa), human brain is connected to the skin, but it works in a different dimension link-up. The virus through the middle areas of the skin moves into the brain because it is made of the same, it is the same transformation.

After it moves into the brain, the virus has the strength to sit in the part of the brain responsible for memories, and this is the reason we call it Alzheimer’s due to herpes. This process could be compared to a frequency jammer. Similarly to jamming some radio frequency, the herpes virus has this capability at a particular strength level (in this case at the level of memories) because it came through the middle section, through the membrane of the body of the man. It has the strength which fits into the strength of the memory part, it jams it, and produces what we call Alzheimer's. 

As we grow older our brain function changes and under given strength, it matches with the strength of the herpes virus which leads to total blockage. In wireless communication, one intruder is able to block the entire communication channel by jamming the particular frequency. Analogically, this is exactly how HSV works. When the frequency of the source matches the frequency of the jammer, there is no communication. Whatever information sits in the brain becomes inaccessible due to the blocking ‘noise’. 

HSV originates from the brain of the man itself. It is the release of the energy from the inner soul of the man touching the invisible memory part of the body of the man. That is why it goes back to where it came from, that's why it affects the memory part. 

The digestive system, anus and genitals

Figure 5: Human Digestive System.

Herpes also appears inside the body of the man. It can be observed in different internal areas - at the entrance (oral cavity), esophagus and stomach. All these are made of tissues of different composition and hence one should look for signs of herpes in the opening of the stomach (sphincter), stomach, the small intestine opening (pylorus) and in the opening between the small intestine and the large intestine (ileocecal valve).

When the HSV virus enters the middle layer of the oral mucosa, it is able to travel through the entire digestive system, as mucosa is a mucous membrane that lines the inside of the digestive tract from mouth to anus (Houghton Mifflin Harcourt, 2016). Herpes which moved, through the mouth, from the outside skin into the mucosa of the digestive system becomes stronger because it mutated to accommodate to a stronger dynamic system. In this process, the virus gains energy - when it mutates it becomes stronger. 

Herpes moves down the middle layer of the esophagus, the stomach, the small intestine and the large intestine. It ends in another point, which similarly to the lip has two phases - the phase of the dynamic dimension of the internal organ and the skin of the man - the anus. This is how herpes moves from the mouth directly into the genitals and in doing so, mutates to be stronger. As mentioned in the Background section, HSV-1 causes about 80% of all oral lesions and only about 20% of genital lesions while HSV-2 causes the reverse (about 80% genital and 20% oral).

HSV-2, on the other hand, mostly appears on the reproduction organs of woman or man. One aspect of the structure of these organs – the external skin and the internal tube - are analogues to the lip. It is an interface, a point in which the two triple-layered structures join. What originates from the inner layer of the outer skin, through the space gap, moves inside the tube and one gets herpes on their genitals. The virus can then travel in the opposite direction to HSV-1, but one might not observe it in the mouth10.

The bone structure and the hip

Figure 6: Human Skeletal System. [Source: Pixabay]

Body of the man carries a bone structure, which contains spinal cord, hip, skull and the rest of the skeletal system (Figure 6). Structure and the role of the hip can be compared to the role of the cup in the food cup experiment, explained in the Background section. In that experiment, the energy of the orange was transferred into the water. Up to now, doctors tried to sort out the problem of HSV-2 by using creams. However, in the interaction with the creams (or ointments) and other medicine, the virus moves (and hence mutates) but it cannot be eradicated; symptoms are partially addressed, not the cause. 

With the new research which was published recently, one understands, and this supports what was explained years ago, that the hip of the man becomes the cup. The herpes virus nests in the hip of the man. This is why doctors could not solve it. Whatever the therapy and treatment, eventually it comes back. When this cup’s/hip’s energy reaches a critical point, it releases the energy into the same layers it originated from and one has the flaring of the disease. 

Processing

Herpes virus does not originate from outside, it is the creation of our own soul. The human body is a composite of different GANSes. It is a container filled with GANSes and every substance which enters the body, is transformed into the GANS state. In plasma technology doctors process various health disorders by creating conditions for the transfer of energy. This is done via use of static and dynamic plasma systems. Such systems are ‘fueled’ with different GANSes to create conditions for the transfer of energy. One needs to understand how to create such conditions and what effect this has on the human body. 

Doctors and scientists working with the plasma technology, on numerous occasions, demonstrated how this can be achieved. They managed to deplete the salt from the foot of the coma case11. To do so, the urine of the female subject was collected, the GANS of it was created and added into the GANS patches. What was expected to be weeks-long process, was processed within days. Another example of the same principle is the breast cancer case presented in the ‘Cancer solution in exchange for peace’12. To remove Calcium, the seed of that particular cancer, two patches of Calcium GANS in the appropriate ratio were applied. The same principle applies to the removal of other metals from the human body and the same applies to HSV.

To create the correct transfer of energy, firstly the energy of the seed of the problem needs to be recognized. The understanding of this process is analogues to the way homeopathy works – ‘like cures like’. 

Thus, to prepare the GANS water for processing herpes, the liquid of herpes itself, when it flares up as blisters, needs to be collected in whatever quantity available and mixed with 50% CO2 and 50% ZnO GaNS13 water. The field strength of the CO2 GANS present in this solution, provides a link with the physicality, while ZnO GANS is a link to the brain and the emotions – the origin of herpes virus. 

It is also possible to collect the liquid of herpes and mix it with CO2 GaNS and liquid plasma to make a base GaNS of it. The herpes GANS  water can then be used in processing. Every HSV virus is unique in its strength, it is as unique as our fingerprints and hence the liquid plasma of it, is only to be applied on the person of whom it was collected. 

The simplest way to process HSV is no to use patches of different ratio, but to apply it on a cotton bud at the point of rupture. Three times a day, for no more than half an hour per session. This creates a fast energy transfer which covers all the affected parts – lips, the entire digestive system, the hip, genitals and the brain. This procedure can be followed for a number of days until the virus is gone. It is worth noting that the herpes processing is not preventative. One can only apply it when the outbreak occurs, when the ‘identity’ of the virus is known. 

Discussion

Hsv-9.jpg

To date, the origin and the exact mechanism of the herpes simplex virus was never fully understood by the present science. This publication explains these processes in detail. Now we understand from the Alzheimer's, all the way to genitals how herpes interacts and mutates. HSV-1 and HSV-2 are the same, just operate in a different gravitational-magnetic field strength - one is stronger, the other one is weaker. The stronger one is capable of surviving in acidic, enzyme-rich environments, and hence it travels through the middle layer of the mucosa (a membrane that lines various cavities in the body and covers the surface of internal organs) of the digestive system, to reach the anus. 

In general, herpes is a totality of the disease across the body of the man and this changes the approach to eradicate it. Herpes with the new understanding of the Keshe Plasma Science and Technology should be able to be managed, should be able to be reversible14. For the first time, the entire process on herpes is understood. Why do we see herpes on some points of the arm or the leg? This relates to the situation in one’s dream or real life, where the skin was physically damaged , punched, compressed. Herpes then manifests in the point of weakness of the middle layer of the skin. 

When the virus gets underneath the skin, one can observe some dots which indicate the energy transfer. Herpes, in every level with a new knowledge of the Keshe Plasma Science and Technology, is reversible. By understanding this knowledge, no virus should be a danger to man, even in space15.

Herpes can be transmitted physically - if one carries the same emotion and kisses another person on the same space gap between the skin and the lip - the inner tube - the virus is transferred into the middle layer of their skin, because it already carries a copy of the human DNA. However, it is created internally, through dreaming, by the soul of the man. In a condition of interaction with other salts, a huge pack of energy from the soul of the man is released which cannot find a physical position. This is why isolated people of the jungle, tribes living far from civilization also carry HSV. The trigger can be the dream of a tiger or a lion endangering their life. Thus, one can perceive the herpes virus as one of the outcomes of the adaptation to the changing environment - mutation. In order for our body to mutate, the information, the energy, the new structure, comes directly from the brain. Therefore, for the process to complete, the change needs to find its confirmation in the physicality. 

In the case of herpes, the impulse for the change comes through the process of dreaming and emotions associated with it. These emotions get ‘translated’ into the body structure and a virus’ energy is transferred into the lip – responsible for the communication or confirmation of the frightening situation one witnessed in their dream. 

Hsv-10.jpg

The virus, same as our body and any other entity in the Universe, mutates according to the environmental conditions. As it travels, it adapts to the enzymes and acids encountered in its environment and mutates in the same way as the human body mutated throughout centuries to adapt to the changing environmental conditions. It can mutate because of the salinity in the layers it travels within – this can be compared to the GANS making procedure, when the salty water is placed between the two plates and forms an environment for whatever field strength is to manifest in it. Life on Earth started in the salty waters of this planet. In the same way, the human body, via its brain and the different concentration of various salts, created all its organs in order to cope with the surrounding environment. Not only organs such as liver or kidney, but also the color of the eyes or the skin manifests through the same process. The HSV mutates as it travels through the human body and a trigger for it to travel back to where it came from, comes from its nest – the hip. When the virus in the hip reaches a certain energy level it becomes stronger, as compared to its origin; and based on the fundamental law of plasma (the stronger feeds the weaker), the energy transfer is through the skin, in the direction of the brain. The details of the herpes process – the importance of the layers of the skin, their space gap, salt content and other elements is explained in detail in this paper.

Two-thirds of the world population suffer from HSV and up to now its mechanisms were not understood. Now we know it is the creation of the soul of the man. The way every human, through their soul creates various internal structures - muscles, heart, two lungs, intestines and other – it is now understood that herpes is a condition of the soul of the man that releases a huge pack of energy and this seed flowers to become a physical, amino acid-based structure, capable of mutating inside the human body. Not only with HSV but with any virus, one needs to understand how it travels, where it nests and what is their gravitational-magnetic field strength. To eradicate amino acid-based viruses, one can use any of the presently known GANSes, which match in gravitational-magnetic field strength one or more of the amino acid’s elements. Different viruses have different characteristics and operate in a diverse spectrum of fields. Herpes virus, in any shape or form, be it the herpes of Universe or the herpes of planet Zeus, now you can handle it16

Hsv-11.jpg

Knowing the origin of the HSV virus, the door to eradicating it using the same mechanism opens. The virus mutates according to the environmental conditions, through the energy transfer, and by introducing the energy of the virus itself into its environment, the new environment drains its energy. This is how its cycle closes and because it manifested in the physicality it eventually ‘mutates out’ of the human body and does not come back. The process involves collecting the liquid from a blister, because the virus continuously mutates and in order for the processing to be effective, the system needs to be tuned into the correct (actual) field strength of the virus – as the virus mutates, one needs to mutate with it. In the Keshe Foundation, viruses are understood as packets of energy, which leech into the structure of the physicality of the matter state of the human body - what we defined as the GANS state of the body of the man. 

Man, in space will face more problems with this kind of energy packages, than with anything else. As one travels with the highest speed across the universe, they are touched by many kinds of viruses. The spacecraft itself, in interaction with the different field strengths of the universe - like the way Earth in the interaction with the Sun creates different lights - creates different energy packages. Some of them, might be at the strength of the amino acid or the amino acid strength of the soul of the man. When you come to the new space technology, now that we take human race outside the boundaries of Earth, we have to solve all the problems of the man. Virus is an RNA, without the physical DNA. As an energy pack which maintains its shape, a virus has a DNA of itself which is a memory of itself as a field. 

Supplementary Materials

1Herpes simplex virus. http://www.who.int/news-room/fact-sheets/detail/herpes-simplex-virus 

2 Global Estimates of Prevalent and Incident Herpes Simplex Virus Type 2 Infections in 2012. https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0114989

3243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=1h1s 

4Herpes Simplex Virus Infection https://en.wikipedia.org/wiki/Herpes_simplex#/media/File:Herpes_Infection.png 

5243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=21m16s 

6243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=1h9m11s

7ALS – A death wish which comes true - https://usastore.keshefoundation.org/store/productALS/  partially republished in https://keshefoundation.org/education/news/kf-plasma-times/kf-plasma-times-august-2018 

8COHN: Carbon – Oxygen – Hydrogen – Nitrogen, the building blocks of the amino acids. 

9243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=47m28s 

10243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=57m18s 

11Coma case processed with the Keshe Plasma Science and Technology https://youtu.be/7ikCf7DSNng 

12Cancer solution in exchange for peace https://www.youtube.com/watch?v=aiJ-7cxNtvk 

13Note that during the production of the CO2 GANS, ZnO is also created in different ratios, depending on the applied procedure.

14243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=1h1s

15243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=1h12m34s 

16243rd Knowledge Seekers Workshop - September 27, 2018 https://youtu.be/4ch0OioHzjI?t=1h14m20s  

Reference

Agostini, S. R. (2016). Agostini, S., Mancuso, R., Calabrese, E., Hernis, A., Nemni, R., & Clerici, M. (2016). HSV-1 AVIDITY INDEX: A POSSIBLE BIOMARKER FOR MONITORING THE EVOLUTION OF MILD COGNITIVE IMPAIRMENT TO ALZHEIMER’S DISEASE. Alzheimer's & Dementia: The Journal of the Alzheimer's Association 12 (7), 1052.

Bearer, E. (2013). Addressing Koch's postulates: The role of herpes simplex virus in Alzheimer's disease. Alzheimer's & Dementia: The Journal of the Alzheimer's Association, 9(4), 116.

Davis, C. P. (2018). Oral Herpes. Obtenido de eMedicineHealth: https://www.emedicinehealth.com/oral_herpes/article_em.htm

Encyclopedia Britannica Inc. (2018). Mucous membrane. Obtenido de Encyclopedia Britannica: https://www.britannica.com/science/mucous-membrane

Houghton Mifflin Harcourt. (2016). CliffsNotes. Obtenido de Structure of the Digestive Tract Wall: https://www.cliffsnotes.com/study-guides/anatomy-and-physiology/the-digestive-system/structure-of-the-digestive-tract-wall

Itzhaki, R. F. (2018). Corroboration of a major role for herpes simplex virus type 1 in Alzheimer's disease. Frontiers in aging neuroscience, 10, 324. 

Lövheim, H. J. (2015). Herpes simplex infection and the risk of Alzheimer's disease: A nested case-control study. . Alzheimer's & Dementia, 11(6), 587-592.

Lövheim, H. J.-G. (2015). Reactivated herpes simplex infection increases the risk of Alzheimer's disease. Alzheimer's & Dementia 11(6), 593-599.

Piacentini, R. G. (2014). HSV-1 and Alzheimer’s disease: more than a hypothesis. Frontiers in pharmacology 5, 97.

Balancing the Body with Nano-Coated Eeeman's Biocircuit

by Jakub Olszewski, Przemyslaw Woznowski, Marcin Zylik. 
Keywords: body balance, polarity, nano, balancing system.

Published: December 2018.

This article is also available in: polish.

Introduction

BioPlasma Balancing Circuits is a system that cleans and polarizes the flow of vital energy in the body. This system is based on the studies of Leon Ernest Eeman from nearly 100 years ago (Eeman's Healing BioCircuits) and by enhancing it with the KF nanotechnology its effectiveness is reinforced (by around 2 orders of magnitude), making the original Eeman design a plasma therapy device. This name came to existence to distinguish the base Eeman system from that made with plasma technology. Dr. Miki Shima, president of the Japanese-American Foundation for Acupuncture Treatment, spoke about the original Eeman design made of pure copper: "Eeman's Healing BioCircuits actually doubles the rate of Chi energy flow through meridians in the human body." (Shima, 1989).

Life energy was given many names by many different cultures: prana, orgone, ether, Chi, mana, plasma (bioplasma) - it is a higher-order energy that is the building material of the material world. However, you do not have to be a sensitive person to feel this energy, to experience, in physicality, the effect of the BioPlasma Balancing Circuits. Through the use of the KF nanotechnology, in the form of (Nano) processing the copper, and the use of GaNSes of various elements (corresponding to at least 98% of the of the human body composition) characterized by 'opened' magnetic fields; the field of interaction is transferred to the field of the human body, by the means of nanocoated copper elements. Due to the specificity of the technology used, the whole device is hand-made.

This system does not require any external energy supply, because it operates on the bio-plasma energy of the human body, and its strengthening with the nanotechnology makes it more intensely felt, than devices using external power supply (such as zappers).

This publication starts with a discussion of the history of the creation and application of the original Eeman system and introduces its new plasmatic version, along with a new understanding of the operation of such a modified system. Different variants of implementation and connection of such a system are presented, so that the reader is able to build it themselves to enjoy its balancing effect. Finally, the authors present the observations and feelings of people who used the system, along with the results of its working.

Background

Figure 1. Eeman’s map of human’s body polarity (Eeman, 1947, p. 36).

Leon Ernest Eeman was born on May 18, 1889 in Gent, Belgium. Sources do not specify exactly when he moved to London. In England, he served as a pilot in the Royal Air Forces during the First World War, then he suffered in an air crash, which he survived but was left completely paralyzed. He was hospitalized for two years, but the doctors did not give him any chance of returning to full health, and his medical records stated "100% physically unfit". Eeman did not accept such decision, and being an educated man, with an open mind and an insight into the operation of our own energy system (mostly thanks to long meditations and connecting with the higher Self), after two years he changed the course of his physical existence by 180 degrees. He developed a therapeutic technique based on the bipolarity of our body (as in Fig. 1, Yin and Yang, male and female energy) through relaxation, using pure copper. He created a simple device consisting of copper wire screens, which he called "Biocircuits", and described it in his book (Eeman, 1947) and reports. His knowledge was collected, described, and developed further in other works (Patten, & Patten, 1988; Brown, 1989; Borderlands, 2012).

During the therapeutic session, when a person lays down and uses the system, their energy potentials are levelled. It was observed that during a 30-minute long energy balancing treatment, the person fell into deep relaxation and regained vitality; and the fatigue disappeared after several sessions. Special attention should be paid to our individual polarization of the body. In his works, Eeman reported that some people may have a ‘reversed polarity’ of the body (often linked to left-handedness), and hence the primary connection (Fig. 2) may not be correct. One should therefore change the probes kept in their hands, so that the system starts to work properly. The easiest way to check the polarization of the body is to observe oneself while using the system. If the original setup does not cause tension, arousal, nervousness, etc. the polarity is normal. If one experiences any of the symptoms listed above, the solution is to swap the probes in their hands.

Figure 2. One person (L), and two people (P) in a closed Eeman relaxation circuit (Eeman, 1947, p. 29, 40).

“The basis of the flow effects obtained by the use of these Eeman circuits, was the discovery that human bodies give evidence of being bi-polar, along three axes — Head to feet; Right side to left side; Back to front. When polar opposites are connected together, whether within one body or between two or more bodies, the effects noted include greater relaxation, recovery from fatigue and disease, greater capacity for work, better health in general. Eeman circuits connecting polar opposites are termed ‘Relaxation Circuits’.” (Borderlands, 2012). 

Eeman and his project collaborators, under controlled conditions, for a period of one year, carried out thousands of carefully documented experiments. One can read about it in the book "Co-Operative Healing" originally published by Frederic Muller Ltd, London 1947. He presented his research to the medical world, but the knowledge he wanted to share was not accepted by the world of science, as this was the case with Wihelm Reich, who, with the energy of bioplasma, healed people in the so-called orgone chamber; Tesla or Lakhowsky's - the creator of the famous oscillator, with which 90 years ago all the diseases, including cancer, were treated.

Figure 3. A group connection using a vial with a dissolved substance.

The Eeman's balancing system includes various variants. It can be used by one person, but it is also possible to combine several people into one circuit, e.g. two to four - as in Fig. 2 and Fig. 3. For right-handed people, the correct system setting is for the person to hold in their left hand, a copper probe connected via an insulated copper wire to the copper mat under their neck; while the right hand holds a second probe, connected also with an insulated copper wire to a copper mat at the base of the spine. Polarization, according to its creator, should last 30 minutes, in one session, per day. Further research on the system and its application in treatment, introduced the possibility of administering drugs or other substances (herbs, etc.) without the need for physical consumption - as depicted in the diagram in Fig. 3. What is interesting in applying this modification, is that is seemed to be very effective because side effects/overdose symptoms of any substance (e.g. aspirin) started to appear as early as 15 minutes into the session, using a slightly modified system. This modification involves the installation of an extra container, in which a substance dissolved in water may be administered. The above application gives us practically unlimited possibilities in the use of plasma technology to balance the whole body without the need for building advanced devices, or when it is not possible to take advantage of the more advanced technological solutions.As one can read in the book "Co-Operative Healing" (Eeman, 1947), among the ailments that can be eliminated completely with this balancing system are: psycho-motor disorders, cardiovascular problems, severe chronic headaches, high blood pressure, rheumatism, sciatica, stress, insomnia, and many others described in the above-mentioned book.

The new understanding

One should pay attention to the fact that each of us while sitting in a chair in front of a computer, in the office, or wherever else, often unconsciously crosses their hands or legs, or both at the same time. Looking at the drawings describing the polarization of the human body (Fig. 4), now we can clearly understand why we do it on a daily basis (balancing/equalizing the potentials of both poles of the body). In plasma technology, we also talk about the magnetism of the right hand which corresponds to the left hemisphere of the brain, and the gravitational character of the left hand and the right hemisphere of the brain. Eeman's system was invented because his creator was paralyzed and could not put his hands under his spine. This position, where the right hand is at the base of the spine and the left hand at the base of the skull, even for a healthy and mobile person, is not comfortable in the long run. Plates and wires create a virtual extension of the hand. Hence, one can lie down comfortably without creating any extra tension in their body. This biocircuit creates an additional, external system which allows for the transfer and balance of the energy blocked or stored in the body - the same principle is the basis of acupuncture and other therapies which work by regulating the flow of the of human life energy and perceive any disease as a deficiency or accumulation of this energy. The initial systems, which we experimented with (Nano-plates, normal copper wire and probe), gave very interesting results. Due to the brittleness of the Nano-coating, one would have to consider either a full protection of the Nano-plates so that they do not get damaged (crushed) or the use of the substance-adaptor as the only Nano element of the system (Figure 5-B, 5-C and Figure 6-R).

Figure 4. Polarization of the human body according to Eeman and the understanding of plasma and other sciences.

The new technology, thanks to which one gains access to the released field structure, gives wide possibilities in using this system. GaNS and Nano allows to faster balance the potential difference of the body, through the operation of the stronger fields of plasma, which condition the physicality. The energy circulating in our body passes through the so-called 'space-gap' of the Nano-layers of the system and begins to circulate in it. This system gives us great possibilities in terms of compact construction, quick modification for a specific ailment, and ease of use. Plasma technology opens up this potential even more. Thanks to it, one can compensate for what the physicality lacks, or deplete what it has in excess.

The graphics in Fig. 5 show several variations of this system that have already been made or are awaiting to be made. On the left (A), the system incorporating the salt water solution container (brine) is presented. Knowing salty water's gravitational properties, besides balancing the body, what the body has in excess gets extracted and stored in a container with brine - the same principle applies to the original Plasma Coil Unit (https://en.kfwiki.org/wiki/Plasma_Coil_Unit), or to any GaNS production. Brine is an environment in which fields of different potentials, as they seek balance, create the field strength corresponding to the potential difference of both elements - whether this is in relation to metal plates (GaNS production), our hands (different therapeutic systems or working with the plasma fields), or static or dynamic plasma systems (PCU, PBU and dynamic plasma systems for space travel). This brine, along with the fields it stores, can be used to prepare GaNS targeted specifically for a given person and their ailment, for further processing in the version B or C of the system depicted in Fig. 5. 

Figure 5. Different implementation of the plasmatic Eeman circuit.

The graphic in the middle (Fig. 5-B) shows the modified circuit, incorporating the nano-coated substance-adaptor, into which one can place GaNS or liquid plasma in order to feed the body with its fields (the equivalent of using one patch to feed). Whereas the right side of this graphic (C) illustrates the system with two substance-adaptors. Such a system can be used to balance the body using the gradient of fields - as one does in the case of patches, reactors or other systems used to date, in which the potential difference of the two GaNSes creates a directional plasma flow (plasmatic wind). The third system is the most versatile and leaves a very large room for maneuver, analogically to balancing systems based on dynamic reactors. One can use the previously collected brine (in the suitable gradient) to balance their body in such system.

BioPlasma Balancing Circuit is a kind of interface, a connection which creates conditions for the balancing of the body's energy potential. Its various modifications allow to: A) 'pull' the potential difference out, outside of the 'system' of the human body (extraction); B) introduce a certain plasma field strength in the form of GaNS or liquid plasma, in order to balance the entire system by 'feeding' it with the fields it needs (supplementation/feeding); and C) create an additional potential difference by introducing a suitable gradient of plasma into the system, which interfaces with the human body (fast extraction of a given field strength e.g. Ca or Hg).

Procedure

Appearances to the contrary, the preparation of such a system is not very complicated. One needs the following materials: 

  • 2 x copper plate or copper mesh (base-pad), 
  • insulated copper wire (connector), 
  • uninsulated copper pipe (handles), 
  • plastic tube (optional). 

The basic system:

Figure 6. Copper plates, wires and tubes (L), ‘substance-adaptor’ (R).

Depending on the material one chooses to make the base-pads of (copper plates, mesh, or wire), form or cut the base-pads to the desired size. If the system is to incorporate the substance-adaptors for circuiting GaNS or other substances, form a copper wire spiral adaptor (as in Fig. 6-R). The prepared elements are then subjected to the Nano-coating process  (chemical NaOH or fire-coating)

https://en.kfwiki.org/wiki/Category:Nano-Coating_and_the_Production_of_GaNS

Once the process is complete, assemble all the elements of the system together (as in Fig. 5). Fig. 6 depicts the ready to be assembled system together with the substance-adaptor thanks to which one can introduce different fields into the body. 

Advanced version:

Figure 7. Advanced version of the system. Elements on the two pictures marked with * were prepared prior to the Nano-coating process.

In this version, its designer applied a variety of methods to obtain the plasmatic diversity between the upper element of the system and the lower one, to achieve the effect of directed plasma field flow (plasmatic wind). The system incorporates the four basic GaNSes (CH3, CO2, ZnO, CuO - all produced in a 24-compartment box, each cell connected via an LED), together with GaNSes prepared via the caustic method (e.g. Ca). Leather elements are soaked in the CH3 GaNS, made according to the instructions for the production of the GaNS of hemoglobin. The crystals in the copper probes were fixed prior to the Nano-coating, and all other elements were assembled after the Nano-coating process, in a way that allows for quick and easy disassembly and replacement - for example, ampoules with GaNSes. 

The base-pads, which are positioned under the body, were made to be stiff and have adequate spacing, so that the nano-layers remain undressed, uncrushed and retain its velvet structure over the course of using it - its durability was assessed during the six-month, everyday use trial (as compared to the version without the leather cover, that used plastic bags to protect the layers). Similarly, handles made of copper hydraulic tubes, retain their nano-layers on the inside, because this area is not exposed and is hard to access.

Top part: 

The neck-pad was firstly fire-coated; the holding probes were for 1 day submerged in the NaOH solution with the addition of a few ml of the CO2/ZnO GaNS (the first stage of the chemical NaOH Nano-coating process https://en.kfwiki.org/wiki/Category:Nano-Coating_and_the_Production_of_GaNS#Nano-Coating_Using_NaOH ), then both base-pad and the holding probe, were steam-coated with the NaOH solution with an addition of a few ml of the CO2/ZnO GaNS. The holding probe of the top element carries a pure mountain crystal (SiO2) and an ampoule with approx. 5 ml of CO2 and ZnO GaNSes.

Bottom part: 

Nano-coated via chemical etching (analogous to the above) but using different materials: the base-pad and the handle were fully submerged in a KOH solution with the addition of a few ml of the CuO GaNS; then subjected to a week-long steam coating process, again in the environment of the KOH solution with the addition of a few ml of the CuO GaNS. The handle embeds an amethyst - any other crystalline mineral with a stronger gravitational component can be used, i.e. containing a composite of elements with a total atomic mass greater than the one of the mountain crystal of the top part's handle. This handle embeds an ampoule with GaNSes of CuO, Cu2O, Si, Au, and GaNSes made of seashells, limestone skeletons of marine corals, and marine limestone (Ca, F, Mg, I, ...). The red rod, which connects to the end of the copper wire leading to the brine, was subjected to an analogous chemical nano-coating process but using a mixture of NaOH and KOH. The advanced version of the system is depicted in Fig. 7.

Method

Figure 8. BioPlasma Balancing Circuits

The standard system setting is shown in Fig. 8. While using the system, the person should cross their legs. The handle, held in the right hand, through the wire connects to the Nano-plate positioned at the base of the spine, from which the wire transfers the fields into a tank with a 20% salt solution. The handle in the left hand connects to the Nano-plate under the neck. One can use this system either on a regular or ad-hoc basis to quickly balance their body. Thirty-minute relaxation sessions bring beneficial results. 

It is hypothesized that such an improved version of the original Eeman's biocircuit, is applicable in the areas for which it was originally used, such as: psycho-motor disorders, cardiovascular problems, severe chronic headaches, high blood pressure, rheumatism, sciatica, stress, insomnia and many other described in (Eeman, 1947); but also in other disorders and diseases. Authors' observations suggest that its modified version works quickly and gives persistent results in a wide range of disorders. 

One of the unintentional experiments carried out with this system, was the production of the CH3 GaNS. This process was a result of using a steel cord to connect an additional 'grounding' leading from the bucket with brine to the ground outside the house. This initiated the production of the CH3 GaNS, in which a person using the system was part of the production environment. Production of the CH3 was possible due to the fact that the wire, leading from the system to the brine, end with a Nano-coated copper rod.

Observations

For most users, the repeatedly reported feelings relate to the spontaneous relaxation of the body (within 0-15 minutes of lying down), calming of the emotions, calming of the ‘monkey brain’, sensations of heat/tingling in their hands, lowering/reducing the pitch of their voice. Some people, within a few minutes, felt asleep and woke up after 30 minutes (not knowing the suggested time of the session) with a sensation of significant energization.

Results

Female, 91-year-old: The day before the trip (350 km) for an important family celebration, the old lady felt very strong pain in her spine and legs. The pain was so strong that it prevented normal movement. Strong painkillers did not work. Accompanied by a therapist, the woman sat in an armchair and was connected to the system (its basic version, without a container with salt and without grounding). During the first 5 minutes of the session, the pain persisted and so the therapist decided to attach an additional wire leading from the system to the grounding source. The central heating system in the block of flats (un-painted, enameled part of the installation) served as the grounding. After applying this modification, the pain began to decrease. After further 20 minutes, the pain completely disappeared. The woman stood up from the chair by herself. The next day she went to her granddaughter's wedding, 350 km away from her place. She took part in the family celebrations and partied until 1 am, without any signs of tiredness due to the long trip or events that occurred the day before. This was in September 2017 and ever since whenever this type of pain occurs, the woman uses this system on an ad-hoc basis and every time the effect is similar.

Male, 81-year-old: Diagnosed with hypertension, went through a myocardial infarction 12 years earlier and ended up with cardiac bypass; also with a significant loss of hearing that makes communication difficult, and many other burdens originating mainly from the administration (side effects) of medicines; active to the best of his abilities - gardening, cycling. He started using the system to get over a cold and the only suggestion that was associated with him using the system, was to strengthen his, weakened by the cold, organism. The immediate, noticeable effect of the system's working was the feeling of heat in his hands and legs; however the most surprising effects occurred after a few days of using the system and manifested as a recovery of hearing - most likely due to the process of self-regulation of the intracranial pressure in respect to the blood pressure - subsequently varicose veins started to disappear and the his blood pressure dropped to the point that he had to stop taking his hypertension drugs.

People already using the plasmatically modified Eeman system, and those who plan to build it based on the knowledge contained in this article, are invited to share their experiences in using different versions of this system in order to create a compendium of knowledge about the effectiveness and scope of its operation.

Future Work

The BioPlasma Balancing Circuits system has a large potential for further research. So far, the authors have managed to collect data and confirm the operation of the basic system as well as on the version with one substance-adapter. In the light of the recent teachings by Mr. Keshe, in which he described the process of the herpes virus, alongside with the previously released information on other systemic disorders and diseases; the version C of the system with two substance-adaptors (Fig. 5-C) is ideally suited for the use of different gradients of GaNSes (urine, HSV, cancer, excess of certain elements, chemical compounds) to balance or remove these elements from the entire body. Further research is therefore required to assess the full capabilities of this system. An additional aspect that should be considered is the simplicity, low cost and mobility of the proposed system - it can be easily packed into a small suitcase and taken anywhere, along with a set of basic GaNS

Contraindications and disclaimer

This system is not recommended for the use by people with a pacemaker. Special care should be taken by pregnant women. People with implants may experience discomfort and/or various types of pain at the implant site (although one of the designers and users of this system, also has a post-traumatic, metal fastening in the forearm bone and has never experienced such discomfort while using it). 

BioPlasma Balancing Circuits is a design that works on the principle of natural therapies, where a moderately frequent characteristic of such therapies is the periodic recurrence of disease symptoms and discomfort in places of old injuries, which is a sign of restarting of the self-balancing processes related to a given injury or disease.

Legal disclaimer

The use of the BioPlasma Balancing Circuits is of supportive nature and does not replace medical advice or therapies one is already a subject to.

Supplementary Materials

Supplementary materials, in the form of pictures of the different versions of the system, are available through

https://drive.google.com/open?id=1erkz_iwDrYv0NW9Vs8DBL3ZrPApSH0qF 

Bibliography

Shima, M. (1989). Yoga Journal: Homeopathy A Special Report. You are energy.

Eeman, L. E. (1947). Co-operative healing: The curative properties of human radiations. 

Author-Partner Press Ltd.

Brown, T. (1989). The L.E. Eeman Report. The Pioneering Years of Biocircuitry. Borderland 

Sciences Research Foundaction, Inc. Available online [http://altered-states.net/barry/newsletter525/The_L_E_Eeman_report.pdf]

Borderlands. (2012, 29 styczeń). Eeman’s Healing BioCircuits. Co-Operative Healing with Eeman Circuits. Retrieved from http://borderlandresearch.com/eemans-healing-biocircuits

Patten, L., & Patten, T. (1988). Biocircuits: Amazing New Tools for Energy Health. HJ Kramer.

Health application of plasma technology: Magravs Mini Coils

by Barbu Constantin

Keywords: nano copper, knee pain, shoulder pain, portable health unit.

Published: October 2018.  

Subject

This paper describes the application of Magravs mini coils in processing pain. In June 2018, researchers from the Plasma Romania Scientific Association had the intention to miniaturize the health applications for Magravs technology. The resulting devices were used by two participants to process knee and shoulder pain. The results of these applications are presented herein. 

Method

Coils were prepared with 1.5 mm diameter copper wire. Both inner and outer coils were twisted 29 times, counter clockwise. The connections were made according to the publicly available model of the Keshe Foundation's Plasma Coil Unit (Keshe Foundation 2018). After making the connections, the gas burner Nano-coating method was used 3 times over the copper coils, which were then immediately immersed in separate containers containing different solutions of three GANSes (CH3, CO2 and ZnO), where the second container had double the volume of the solution.  The coils were left in the plastic boxes for two days to absorb the GANS fields and then subsequently were taken out of the solution to dry. The whole procedure is depicted in Figure 1.

Figure 1. Preparation of the Magravs mini coils.

First container:

  • 50% CH3
  • 30% CO2
  • 20% ZnO

Second container:

  • 20% CH3
  • 50% CO2
  • 30% ZnO

Usage

Knee pain: the coils were applied together with plasma patches soaked with 20% CH3, 40% CO2, and 40% ZnO plasma waters, where one of the patches had double the amount of plasma water solution than the other.
Figure 2. Processing knee pain with plasma water patches and mini coils. 
Shoulder pain: the coils were applied directly on the pain area of the shoulder (front and back). The participant was asked to apply it 3 times a day for 15min. 
Figure 3. Processing shoulder pain with mini coils.

Observations

Knee pain: "I had a few days when I could not keep the Magravs coils. There were days when I used it a lot - about 4-5 hours continues. Plasma water with of CO2 + ZnO + CH3 GANSes always helped me. But when I was putting the mini coils, it started a deafening pain and so I took them down.”. After 4-5 days of applying the mini coils for several hours a day, due to increasing pain, the participant was advised to reduce the processing to 3 x 15min a day.

Barbu-4.png

Shoulder pain: A 15-minute processing was advised 3 times a day, but during the first application the participant felt asleep for 45 minutes while applying the mini coils to the area of pain. The pain went away and no further processing were needed.

Results

Knee pain: "Since yesterday evening I do not have any pain when I put it. Processing of the knee pain took 9 days."

Shoulder pain: "I got these 2 Magravs coil devices in August 2018 because I had shoulder pain. He told me to keep them for 15 minutes. 3 times a day, but I fell asleep with them for 45 minutes. At the awakening, I could not believe that I had no pain. It is amazing."

Acknowledgements

Thanks to the Keshe Foundation Experience with Plasma Romania Scientific Association www.plasmaromania.ro 

References

Keshe Foundation. 2018. Plasma Coil Unit. Accessed September 24, 2018. https://en.kfwiki.org/wiki/Plasma_Coil_Unit. 

Original submission (text and pictures) here: 

https://www.facebook.com/groups/MGQBucharest/permalink/1107558182725127/?__xts__[0]=68.ARDKXiDyhWPnGJi0CsDECGpCjBJ1h6SISlA7uiYt1Q6JpxhEMzRIrfu65iZZiNABdrJ_us9LxmjSBA5wHhzrFSUPF7jEDp5fHM_KgpWnBq-ZzYZW5k2kpKo_usW6kGwDtfQXIZZ7QZJbVC9RH_FdPq9DFZQQCPYpQUwo14T0y8ARSYo1oPKhQA&__tn__=-UC-R

Applications of plasma technology: Diabetes

by KF China

Keywords: diabetes, high blood pressure, diabetic eye, oculomotor nerve palsy, pancreas, diabetic foot.

Published: October 2018.  

Introduction

Diabetes is a long-term condition which in the recent years became a global problem. According to the WHO (World Health Organization 2016), the number of people with diabetes has risen from 108 million in 1980 to 422 million in 2014 and hence the global prevalence of diabetes among adults over 18 years of age has risen from 4.7% in 1980 to 8.5% in 2014. In 2015, an estimated 1.6 million deaths were directly caused by diabetes. Another 2.2 million deaths were attributable to high blood glucose in 2012. Possible complications include heart attack, stroke, kidney failure, leg amputation, vision loss and nerve damage. In pregnancy, poorly controlled diabetes increases the risk of fetal death and other complications.

The primary function of pancreas is to regulate sugar levels in blood. Diabetic condition manifests when pancreas does not produce enough of the insulin hormone, or the body cannot use insulin properly. Applying GANS water externally and internally restores pancreas and what follows the entire body back to balance. Hence in case of the subject presented herein, the processing of diabetes involved drinking GANS water and spraying the affected eye and the pancreas area with CO2 GANS water.

Subject

This paper documents processing of a diabetes condition. This existing diabetes condition consequently led to the development of two other conditions, namely diabetic foot and oculomotor nerve palsy. The subject is a 53 years old male, diagnosed with hepatitis B and a history of 15 years of high blood pressure - up to 230 / 190mm Hg. After 15 years of diabetes mellitus, metformin was administered, with fasting blood glucose levels at 10 mmol, and postprandial glucose at 18 mmol. The father of the subject had a history of diabetic foot and had his limb amputated. 

Figure 1. Diabetic foot on admission to hospital (February 2018).
Figure 2. Oculomotor nerve palsy – eye fully shut (May 2018).

The subject was admitted to hospital in February 2018 for diabetic foot – pictures of the foot in Figure 1.  He reported a slight improvement after receiving the treatment, but the problem remained. In April 2018, muscle and nerve problems in the eyeball were diagnosed by doctors as a result of diabetes. He visited several hospitals but without any improvements. Finally, in May 2018 ended up hospitalized for the oculomotor nerve palsy. In the early stages of the eye condition the subject was able to open his eye only in 1/3,

no matter how hard he tried and in the later stages it got fully closed. None of the hospital treatment he was subjected to helped in any way. Figure 2 depicts the condition of the eye before processing it with plasma.

Method

Processing of the diabetes involved drinking GANS water and spraying both, the area of the eye and pancreas with CO2 GANS water. 

Usage

Oral administration of the GANS water involved drinking CH3, CO2 and ZnO GANS waters, one after another, with 3 minutes break in between at the following times and in the given amounts.

In the first week of processing:

  • Morning: 30ml CH3, 30ml CO2, 30ml ZnO.
  • Lunchtime: 30ml CH3, 30ml CO2, 30ml ZnO.
  • Evening: 30ml CH3, 30ml CO2, 60ml ZnO.

Subsequent weeks:

  • Morning: 30ml CH3, 30ml CO2.
  • Lunchtime: 30ml CO2.
  • Evening: 30ml CO2, 60ml ZnO.

Spraying of the eye and pancreas areas was done several times per day.

Observations

From the start of the process, there were signs of sugar decrease, especially after consumption of carbohydrates, where previously it took a few days for the sugar level to lower. Now within few hours after drinking GANS water, the blood sugar reaches to normal levels. But because of the frequent business trips, habits such as drinking and eating irregularly, and occasionally drinking alcohol, influenced the processing, therefore the monitored blood sugar and blood pressure values were affected. 

Results

Since the beginning of the processing the subject stopped taking any diabetes medication. His blood sugar levels dropped down. At the time of writing this publication when the subject does not consume carbohydrates, his blood sugar levels are still slightly above the recommended norms for a person without diabetes but within the values recommended for diabetics. The fasting blood sugar level (measured just before dinner) is 5.6 mmol/L and two hours after meal is 9 mmol/L. On a diet including carbohydrates, these values go up to 8 and 14 mmol/L, respectively. The recommended sugar values are captured in the table below.

Fasting  Normal for person without diabetes 70–99 mg/dl (3.9–5.5 mmol/L)  Official ADA recommendation for someone with diabetes 80–130 mg/dl (4.4–7.2 mmol/L)  2 hours after meals  Normal for person without diabetes Less than 140 mg/dl (7.8 mmol/L)  Official ADA recommendation for someone with diabetes Less than 180 mg/dl (10.0 mmol/L)
Table 1: Blood sugar chart (Diabetes self-management 2018).

Over the six weeks period, the subject improved significantly but still needs to control the consumption of carbohydrates. He still drinks GANS waters, following the processing steps and further results will be reported on in the future. 

Diabetic foot
Figure 3. Diabetic foot after 6 weeks of processing with plasma technology.

The 53 years old man reported that the diabetic foot had improved significantly during processing with plasma technology. The wound was almost completely recovered. Pictures in Figure 3 were taken 6 weeks after the beginning of the processing. 

Oculomotor nerve palsy

Six weeks since the beginning of the processing the subject was also able to open, for the first time, his affected eye again. Below, in the Figure 4, is a picture of the him trying to open his eyes after 6 weeks of processing (left). Although the subject could open his eye, since the right eye was not used for a long time, the optical nerves degenerated, and he was still accustomed to the situation of the eye closed. A week later, he received the processing protocol with GANS patches to restore the optical nerves in the head and eyes. Within 5 minutes, the visual clarity of the subject's response increased from 70% to 95%. Next (right) is a picture taken at the end of the processing.

Figure 4. The 53 years old man trying to open his eye after 6 weeks of treatment (left) and after additional processing for the double vision (right).

References

  1. World Health Organization. 2016. Global report on diabetes. World Health Organization.
  2. Diabetes self-management. 2018. Blood sugar chart.  https://www.diabetesselfmanagement.com/managing-diabetes/blood-glucose-management/blood-sugar-chart/

Supplementary Materials

Hospital records
R1-3.png
R4-6.png
R7-99.png
Discharge report
Dr1-3.png
Blood sugar and blood pressure tracking charts
Bp1.png
Bp2.png
Bp3-51.png
Bp6-8.png

ALS - A Death Wish That Comes True

This paper was written and published by Mehran Tavakoli Keshe, founder of the Keshe Foundation, on 25.9.2013. 
Keywords: separation of souls, death, physical damage, reversal. Published: August 2018.
[…] With the release of this paper Stichting the Keshe Foundation for the first time in its history opens the doors of its research to the public for a glimpse into one of its most closely guarded research programs. […]
We have developed the health section of our spaceship program because we believe the spacecraft of the future will not be able to carry all the medicines and doctors of every discipline required to cover all aspects of the health needs of people in long-haul deep space travels. In order to meet every eventual medical need there would be more medicine than food and more doctors than passengers on board these craft. 

An insight into the principles by which the Keshe Foundation designs and operates its body resetting systems 

In our work we consider the plasmatic structure of the elements and the interaction of the Magnetical and gravitational fields of these elements in the human body. We consider not only the physical method of connection and communication between different parts of the body, but we look at the invisible connection and interactions of magnetic fields and gravitational fields of the matters of the elements or organs in the body relative to each other. This invisible but real interaction of different parts of the body 

is one reason why the world of medicine has such a hard time at present curing most ailments. 

We consider the human body to be like a galaxy in the universe, with all its physical entities and the hidden and invisible interactions and connections of its magnetic and gravitational fields (Magravs) forces. In a galaxy there are visible stars and planets and at the same time these have invisible Magravs connections between all their parts and with each other. […] 

New fundamental criteria used in application to health […]

From our research we can with confidence state that amyotrophic lateral sclerosis is a reversible condition, if it is discovered at the right time and handled in the right way by a competent team of physicians. In view of our development of plasma technology and its applications, amyotrophic lateral sclerosis should no longer be a death sentence handed out by doctors, who tell their patients in the same breath that there is nothing that can be done to save their life as the present world of science has no cure for this killing disease. The present medical world cannot explain the origin of amyotrophic lateral sclerosis or what triggers this process in the human body. […]

We have been striving to understand why the body puts itself through this horrendous process of amyotrophic lateral sclerosis that brings about its death. We see this as one of the illnesses most likely to occur in space when people are away from home and unknowingly can trigger such a process through depression or loneliness during long periods of being away from loved ones. 

For the process to start, it requires two psychological trigger points during the life of the patient. One such event may take place in the early years or in the teenager phase and then for the illness to show itself outwardly, a second trigger point is needed. This can take place in the early twenties or in later years, causing the recurrence of the same feeling as in the first trigger point. […]

The point that has not been understood up to now is that most carbons are of diamond structure and the information received by the carbon through a given channel for a matter of a microsecond changes the characteristic of the carbon structure of the amino acid to given resistor strength level or to a given carbon structure of graphite atomic form as the carbon needs to be for a given current level of the information received from the brain for given retraction or reflex. In This process causes the potassium of the electro-motoric junction valve to be changed into insulating mode or disconnection mode, keeping the insulator crystal structure. […]

In the case of amyotrophic lateral sclerosis for example in the electro-motoric junction of the fibres, both the lines of the electric and the emotional fields operate simultaneously, with the potassium functioning to contract the fibre while the sodium process retracts or opens the fibre, which needs the lesser force. In the motoric operation, the potassium releases stronger fields and so it commands a stronger and longer contraction, as when a man needs to hold onto a bar to save himself from falling, while to open the same fingers the muscles use partly the reflex and partly a small amount of energy to allow the fibre to relax, which is done by the sodium magnetic field release. […]

Amyotrophic lateral sclerosis is not the work of one doctor; it needs a good dedicated team of physicians, psychologists, nutritionist, kinesiologist and neuro-tissue specialist to be there in every stage of development of the process and progress with the patient. Reversing amyotrophic lateral sclerosis and multiple sclerosis requires a caring and dedicated team if the case is to be successful in all aspects. […]

Wisdom gained 

From our research into the cases of amyotrophic lateral sclerosis over the years and our understanding of how this process starts in the human body, we have called this illness the death wish that comes true. The affected person has unknowingly through two different but similar emotional situations in two different stages 

of their lives wished they were dead, and then when their wish comes true they have to complete their unconscious desire through such a traumatically slow and painful death. The patient himself triggers the physical death-code of his own body.  [..]

In all aspect of physics and the world of science man always has looked for the physical connection between the parts of the human body and has forgotten or never understood that as the human body is made of the plasma of protons and electrons and plasmas of all the atoms in the molecules of amino acid, these plasmas irradiate Magravs and receive Magravs of other cells, so they do not need a physical connection to interact 

and affect each other's performance.

Amyotrophic Lateral Sclerosis

The process starts by the person wishing to be dead, and progresses through paralysis and silence to eventual death. Now with the new plasma technology developed by the Keshe Foundation and as we have seen with this case and a number of other cases around the world we can say with confidence: 
"We have enough knowledge now to start to reverse the process of amyotrophic lateral sclerosis in the human body psychologically, and then the body will reverse the physical damage by itself. "

On behalf of the Keshe Foundation M T Keshe 

Director of Stichting the Keshe Foundation 

Spaceship technology in the service of humanity 

The complete published article can be found at the following link: https://usastore.keshefoundation.org/store/product/ALS

Space Technology and Science

The Creation of Black Holes

© M.T. Keshe/The Keshe Foundation. All rights reserved. Author: Nuc. Ir. Mehran Tavakoli Keshe Date of Internet release: 3.12.2006 Extract from Book 3: The Origin of the Universe Revised: 2012
Keywords: black holes, astronomy, universe, space, macro.

Published: December 2018.

Note

The original version of this paper, which explains how black holes are created and how they leak matters and rays into the environment of the universe, was submitted to the Royal Astronomical Society of United Kingdom in London in April of 2004 for peer review and publication. The author after three months received on the 8.7.2004 a letter (Fig. 30) from the Society dated 7.7.2004 saying that this paper will not be published and will be kept in the library of the Society.

Interestingly enough on the same day 8.7.2004 (check the press) Mr. Steven Hawking, the imminent black hole scientist and expert in this field of science announced that after thirty years he has changed his mind and he says that indeed the black holes do leak out rays and he announced this in a conference in Dublin later that month (see the press), so now he has lost a bit of shirt. 

We have wondered for years how coincidental was the topic, the date of the letter from the institute, the date of announcement, and the change of mind of a scientist!

This is the reason why the Keshe Foundation does not believe in the scandals and process of peer review and publishes its own scientific papers on its website and its own books for the reader to peer review the newly gain knowledge. With this process the knowledge is passed on first hand to the public and in some cases in a matter of hours of the discovery, not waiting for month and years until there is a gap in some journal where the paper can be published. The Keshe Foundation firmly believes that ‘if a man has reached the age of maturity and intelligence so that he can read, then he can independently investigate and judge the correctness of the knowledge he receives according to his own level of intelligence for himself”, unless he is an innocent, then he needs to accept the enforced control system of peer reviewing to tell him what to think. This peer reviewing can suit the self-interest of the peer reviewer, or the organization which supports him financially or the nation which has promoted the peer reviewer for their own clandestine purposes, and we have seen the same process of control through peer review systems on different occasions in different countries around the world in recent times. A copy of the letter from the Royal Astronomical Society is enclosed at the end of this chapter for reference. (Fig. 29).

Abstract

Black holes function as the agents of recycling in the universe, and the cosmic matters that they attract are eventually redistributed to other celestial bodies. They appear dark because they form from collision of plasmas of passive magnetic fields that do not interact strongly enough to create visible light. Because of its rapid rotation the matters absorbed by the black hole attain the field strength of principal matter and form a principal star. Eventually its intense gravitational force weakens and its contents begin to escape in the form of cosmic rays and other particles. Though it may last for thousands of years this phase is essentially temporary and the originating magnetic fields slowly move on and separate. A similar process takes place in the surface plasmas of the Sun creating the temporary dark spots that are often seen, especially in the phases when the Sun’s polarity is reversed.

Hypothesis

Black holes are created out of a natural sequence of events in the universe and the existence of black holes in the galaxies and in the universe is a normal event, as is the appearance of the dark spots on the surface of the Sun. Black holes are simply a creation or an outcome of natural interaction between two or more mafs, passive magnetic fields and matters in motion within any dynamic plasmatic magnetic field entity in the universe (Fig. 27).

Discussion

In this paper for the first time, it will be explained how a black hole is physically created and also:

  1. The conditions in which this physical object is created in the universe naturally.
  2. How this body of the mass appears as a dark spot in the galaxy.
  3. What purpose it serves in the universe.
  4. Parallel example of the black hole condition in our solar system.
  5. The use of this phenomenon to enable man to travel in space.

If one could fully understand the concepts of the creation of galaxies, stars and planets and  plasmas, then one could be able to understand the creation and existence of the black hole in the universe in its different scales, since the creation of these entities in the universe follows the same principle for all of them.

Fig. 27: Interaction of two plasmatic energy fields creating the effect of a black hole. 

In understanding the fundamental principle that galaxies like solar systems and planets are given their inner mass and energy at the point of their birth in the universe, so they cannot create additional masses and new source of energy on their own, it is understandable that galaxies can only recycle what they have been given at the start of their lives, to create different new objects like stars or planets within themselves. In universal terms they have a finite mass and energy available to them and nothing more. But at the same time as a part of the bigger picture galaxies have to obey the universal laws of physics. Consequently, all galaxies follow the same rules and so do their physical contents like solar systems and atoms within them.

Black holes are created primarily and only under one condition in the universe and as the consequences of other events in a galaxy. They are not created as a deliberate act and as a predetermined plan in and by a galaxy. But in their way, they make an enormous contribution in keeping the matters in their surrounding environment in check during their relatively short life. At the same time they redistribute fresh materials throughout the galaxy during their cycle of existence. This is done through and as the consequent of them being the source for the creation of cosmic rays in their galaxies, as this is very much like production systems of natural fertilizers of galaxies, where the old matters give their energy in an indirect way to the other existing planets to keep them healthy and for them to receive sustenance from their galaxy. Black holes in the universe are nothing but the collection centre and recycle waste bin of cosmic debris of different sizes, from giant meteoroids to specs of cosmic dust.

As the black hole grows bigger and its gravitational forces take over, then a black hole becomes a predator for parts of its galaxy. They become vast eating machines of the debris and stars and planets and this is exactly what is to be expected of them. The black hole is originally created totally by chance. There are no patterns in their creation. They are simply a creation or an outcome of natural interaction between two or more passive magnetic fields or matters in motion within the galaxy or the universe.

Fig. 27: Interaction of two plasmatic energy fields creating the effect of a black hole.

Creation of the Black Hole

To explain the concept of creation of black holes, phenomenon that are normal and familiar are used and will be relied upon in this paper. Then a parallel for the creation of the black hole type of incidents will be drawn with the same process in solar systems, galaxies and the universe.

Black Holes are created according to the rules of physics in galaxies to collect and then replenish the galaxies with fresh recycled materials, and this recycling is the vital factor in sustaining and making sure that as the galaxy moves there are new materials available to start new systems within it, and at the same time they nourish the other planets within the galaxy with a fresh supply of materials. For example the Earth receives several thousands of tons of cosmic dust per year from the solar system through its atmosphere by a similar method from the black hole within its galaxy and from the universe.

The connection between the black hole and the presentation of new material in the universe and on Earth can be compared to the effect of the collision of Earth’s tectonic plates, when two sources of solid materials interact with each other. In the long run, just as stars and planets become the source of the supply of new materials in the galaxy, similarly Earth’s submerged tectonic plates create lava which becomes the new continents or mountains on the Earth.

Let’s explain this in the following manner. The continental plates and stars systems are forever on the move, moving slowly but surely. On Earth, when two or more continental plates move in a random manner over centuries and millions of years, at some point they come on each other’s path as do the stars and their systems, like the solar system and others in our galaxy.

When on Earth two or more continental plates come together several things can happen. This happens in galaxies too but in a different form too, wherein galaxies the continental plates are replaced by the cosmic spherical or flat oval magnetic fields of the stars or systems.

The next steps in the procedure are very familiar on Earth. As the continental plates push against each other, if they are of similar strength, they rise together to create the mountains over millions of years as these plates are still pushing and moving while they are exerting their strength on each other, so, large mountain ranges on the surface of planets are created.

Fig. 28: Plasma of passive magnetic fields pushing each other.

Other things can happen too and that is if one of the continental plates has weaker energy, the weaker plate will slide under the other. The continental plate that submerges becomes in the long run the material in the lower levels inside the planet, which later become the base material for the magma of the planet, and over millions of years this matter appears again on the surface of the Earth through volcanic eruption. Then some times in the future these too become the source of materials for new continents or an island and so on through volcanic eruptions.

The material drawn into centre of the planet does not disappear but for the time being is hidden from view. A parallel to this scenario happens in the galaxies, when two or more systems in the galaxy reach each other and an area in space is created where the two passive magnetic fields and/or entities have to interact with each other. Then their passive magnetic fields push against each other like continental plates (Fig. 28).

As they are on a collision path with each other and as at the same time the surrounding system’s forces are pushing on their position, they do not allow any other course of motion but a collision path for the two systems on the move. Then a point is reached where there are solid materials in motion from both systems and they have no choice but to collide and interact with each other. Being thrown at each other by their systems in this process, pieces of interplanetary garbage, parts of moons or meteoroids and other bits of the two systems in this region are in the same pot too and all are mixed up and get entangled with each other.

In this area and at the same time as the two systems’ physical materials are pushed and thrown at each other, their mafs and passive magnetic fields are exerting their powers and authority too, like the hidden forces in the planet pushing the continental plates into each other. Then a point is reached where these two magnetic force fields of the two sets of entities come close enough to cancel each other out and create a condition of magnetic field equilibrium, where one field force cannot dominate the other passive magnetic field force, and inevitably an area of no or very week passive magnetic fields force in this region of the universe is established. During all this process materials from both systems are still being piled up in this part of space as the two systems’ materials are brought together due to the pure forces of the passive magnetic field forces of the systems and their surrounding systems in the galaxy.

Even stars themselves in the latter stages of the development of the black hole could become the victims of the black hole, which their system themselves partially created. At this point the new mass of the black hole may even be larger than any of the individual systems that created the black hole in the first instance.

One cannot forget that these masses are still in motion and rotating at very high speeds.

This new mass piled all together in the centre of this creates a very large gravitational force within its region due to the sheer weight of the mass that is collected. Primarily this could become the inertial pull rather than the gravitational pull of matter in these black holes too.

By the laws of physics, one knows that the only reason that stars shine or cosmic rays glow is the phenomenon of the motion of charged particles passing through a magnetic field. This region where the magnetic fields are very weak lacks the main component that could make it shine or be bright. The lack of the passive magnetic field in this region is due to the equilibrium and/or cancelling out of the two interacting magnetic field forces of the two systems.

For a time in the motion of the two magnetic fields of the systems passing each other, in some parts there will be no or very little magnetic field force available, as even though there are charged particles in the area, there are no magnetic fields strong enough for them to interact with to create visible light. Consequently, in these areas of the galaxy there are no glows and no shine.

The reason why this is called a black hole is the fact that in these parts of the galaxy in which two or matters and their magnetic fields meet and interact and can balance each other out, there will be very little visible light emission due to the lack of interaction between charge particles and non-existence of magnetic fields or existence of weak magnetic fields, which cannot produce bright light enough to be visible from the Earth.

This is the reason why if one looks at these areas of the galaxy these areas seem to be darker compared to their surrounding areas, as not only is the light not emitted from the mass of the black hole, but at the same time these matters due to their physical dimensions and their magnetic fields forces strength will not allow and will block lights coming from other sources behind them in the galaxy.

This is why these regions of space seem to be black, but from an outsider point of view looking over the area it looks as if everything and all materials are thrown in to this dark spot from one side and nothing is coming out of the other side, consequently the term of the black hole was invented.

This area appears to be a dark part of the universe, but in reality some rays of light should be observed being produced in this zone, as some charged particles still interact with some weak pmfs of the systems or what is left of them before they enter and interact, and in this part of the galaxy there is visible light but matters are disappearing too.

So in this region of the galaxy astronomers observe a large gravitational force due to the large amount of mass thrown into this area by the two systems as they pass each other. But they have no explanation as what is happening to all this mass. Now one understands the reason for this false assumption and appearance. This is the region where the gravitational forces are in reality a mixture of the gravity and inertia pull of the two systems.

One has to remember that as these two or more systems are passing each other, several scenarios can happen, every one of which will have and has a drastic and profound effect in that region of the galaxy. At the same time these events can generate a vast amount of new recycled material for other entities within the galaxy.

At the same time one has to take into account the time factor and that one is dealing with a three dimensional picture, as in some cases the black hole exists for millions of years during the process of the two systems crossing each other’s path at a slow speeds. The truth is that the black holes are a temporary condition, so to speak, in the bigger picture of cycle of the life of a galaxy, but they surly look like being there forever.

Some of the residue of these interactions will become cosmic rays (10) or the outcome could be the birth of a new system with a new mass from the mixture of the masses of the two old systems after the systems’ parameters balance each other out. In this case the overall masses of elements within the black hole are present as they were in their original systems but now the new black hole could possess slightly less than the combined mass of the two old systems, with the loss of the some of its matter in the process of the interaction of the two systems in the galaxy.

One cannot forget that the centre mass of the black hole is still rotating most probably in the same direction as the systems were rotating which created it. At the same time, as the centre mass is void of the passive magnetic field (PMF), the usual interaction does not take place between the passive magnetic force and gravitational force which usually creates the first basis of heating and sustaining that heat, so that the temperature gradient could take hold and this in turn could create the conditions for the mass to become a large star or a system.

Black-holes-extra1.png

Thus the centre mass has enough material but not the right condition to create the necessary heat for the time being to make the jump to become the source for a new system or a new star in possession of gravitational forces.

This is one of the ways that the black holes become the creator of new stars and systems. Therefore the mass relies upon the heat that is produced mainly by the natural friction of the elements pilling on top of each other in the centre of the black hole. But at the same time these places become the centre of the mafs of principal matters of the entities within the collision zone. At this point the principal mafs and matters of the constituent matters within the collision can take hole and start the process of creation of the principal star with its strong magnetic and gravitational field forces. This condition can lead to creation of a principal star that releases mafs at principal level and through their slowing down and through production of transition mafs, these parts of the universe can again appear to be darker than the rest of their immediate surroundings, resulting from the balance of mafs with the surrounding environment field. Again due to the lack of interaction sufficient to create mafs at the level of visible light, these areas of the universe look darker than the neighboring regions. As the centre of this region is covered with the seed of principal mafs and matters one observes the strong pull of matters to this region without being able to see its origin which is the principal star in the centre of the dark zone.

These interactions between passive magnetic fields occur on a regular basis in our galaxy, as systems are at all times on the move in the confined space of their galaxies. If one had enough time to look out into space, one would observe the creation of so-called black holes the way one observes the passing of dark clouds in the sky of the Earth during stormy times.

The motions in this specific part of the galaxy are in progress over thousands of years, and due to other systems’ magnetic fields surrounding the black hole, their influence and the interface with the passive magnetic fields of these systems make and allow the black hole to leak cosmic rays into the galaxy like a fountain in its surrounding area. It should now be understandable why the scientific world finds materials from the universe that are not nor have not the same age as the original components of the galaxy. Like supernovas, black holes are the source of new material for the galaxy primarily because of the way they are created and the way their life cycle finishes.

The other scenario of the interaction of the two systems could be totally different with an interesting outcome. This is the most horrendous way that the two systems could come into contact with each other and in this case as the two magnetic fields come too close to each other, at the same time other systems around them push these passive magnetic fields together.

The two fields interact and the first stage of creation of the black hole is reached very rapidly, but as the two systems surrender more and more of their debris and planets to the black hole, the central mass of the black hole increases and as the black hole is receiving its contents from two different systems simultaneously, then a point is reached where the weight and the gravitational force of the new centre mass of the black hole surpasses the mass weight of one of the systems that created it in the first place.

Systems which have already lost some of their mass to the black hole at the outset of the creation of it now losses control of their magnetic fields too. To an outsider looking at this event, it seems as if the black hole is consuming everything around it. This process can take thousands of years, until a temperature gradient or a dynamic principal mafs and matters in the centre of the mass is established.

As the centre mass of the black hole has consumed the entirety of two systems, and it is operating in a no magnetic field zone for a period of time where its internal dynamic plasmatic magnetic field cannot pass its physical boundary (see the paper “The Creation of Dark Matter” for clarity), the system will still absorb or attract other masses from its surrounding into itself.

In this scenario, if mafs and materials are held for a long enough time within the centre mass so that a new magnetic field force could be produced and maintained, at this moment of its life cycle this giant of a mass of a black hole will be nothing but a huge gravity and Magnetic field producing machine. By the end of this process a new system or several systems will come to be born and new materials will be scattered in the galaxy, and this black hole will be a dark place but not necessarily cold.

If the centre mass during its creation does not manage to heat up, then the third phase of the black hole syndrome takes hold. This is where the centre mass, which never had a chance to heat up due to total absence or lack of strong magnetic force, at this stage becomes so big with a new large centre that is rotating, and  will inherit a huge natural inertia force from its collective mass with little or no magnetic field beyond its physical boundary to keep it at bay, so this massive large body will start pulling smaller objects near to it into its trap.

The same phenomenon arises when two galaxies come to cross each other’s path too, with the most horrendous outcome for the galaxies in that part of the cosmos, where the outcome of such an encounter is beyond imagination. This has happened before and astronomers forecast it for the Milky Way galaxy in the future as it passes the nearest galaxy to it in the next few billion years. 

The surrounding areas near the newly created black hole will not be safe from the onslaught as this new mass at all times of its existence has the same fundamental problem as do all other systems, and it tries to hold on to all its elements. At the same time like other systems the lighter elements and weaker mafs in the mass move to the outer layers and to the edges of the mass.

As weaker mafs as lighter gasses and particles move to the outer region of the mass, they become better candidates for being pulled away from the centre mass by any opening in the adjacent Magravs systems near to the black hole, when the centre mass reaches a point where its Magravs or its inertia force become weak on its edges so that lighter elements can manage to loosen themselves and escape from its grip into the space of its neighbouring environment.

These freed elements will become part of matter that can be attracted by systems adjacent to the black hole or due to the rapid motion of the black hole may be released as cosmic dust in the galaxy. Therefore objects can and do leak out of black holes into their respective galaxy even during the time of their creation.

If these elements are pulled out of the power of the centre mass, through the strength or gap in the adjacent systems or weakness in the power of the black hole, then they become cosmic rays, due to the fact that during extraction most atoms get striped of their electrons. Some heavier atoms in this scenario lose their electrons in the same way and they appear as plasma and as part of the cosmic dust in the galaxy. Black holes are the source of most of cosmic rays and dust in the galaxies due to this effect (10).

In the galaxies black holes while they are in process of being created and during their existence are still surrounded at all times by other systems and are under the influence of their Magravs.

The powers of these black holes are usually kept at bay by other systems around them with their larger magnetic field forces and gravitational forces, which the black hole is still encapsulated among.

Black holes are normally observed close to the centre of the galaxies and the universe as there are more systems clustered together in these regions, so this increases the chances of different systems crossing the path of each other and in turn increases the chance of the collision of solar systems and galaxies in the universe, hence an increase in the chance of the creation of numbers of black holes.

The stronger mafs and the heavier elements of the universe and galaxies are largely concentrated in and near the centre of these entities, thus the passive magnetic fields and gravitational forces of the systems in these central regions are many times more powerful near the centre of galaxies than what is experienced on the outer edges of them.

Consequently the gravitational forces and passive magnetic forces in the centre regions of the galaxy will soon bring and keep the size and the power of these giants black holes under control. What these collisions of systems and creation of black holes achieve is the fundamental principle of regeneration of new systems out of the old matters, and at the same time they unclog the galaxy of all the loose debris. If one looks at a three dimensional overview of these areas in space, surely due to the movement of stars and planets and the interaction of their forces, one should be able to predict, where the next black hole in that part of galaxy could be produced.

In time a point will be reached where the passive magnetic fields systems in one of the systems immediately next to the black hole will move on, and at this point the feeding frenzy of the black hole will come to an end.

Like volcanic eruptions on Earth where the mantle is thin enough for the pressure of lava to take over, and it can pour out, pushing its way out into the atmosphere as a volcanic eruption, this is exactly what happens when one of the passive magnetic fields in this area moves or weakens.

This creates a gap in the fields containing and controlling the black hole parameters, where the materials in the centre of the black hole, which has been pushed previously into the black hole from one direction, can be released or scattered into the galaxy.

In this process, part of these materials will manage to cluster together and generate the conditions essential for creation of one or more systems or stars. 

The rest of the materials of the centre mass of the black hole becomes cosmic dusts, some become comets and some become cosmic rays and so on.

Thus Black holes are not gigantic eating machines compared to the size of their galaxy. In reality, they are nothing but a temporary condition created in the galaxies due to movement of plasmatic magnetic field systems as they are crossing each other, very much like two masses of clouds crossing each other’s path and colliding with each other. This interaction of clouds with each other creates abnormal conditions in that area of the planet, where their thickness can block the rays of the Sun behind them and the sky looks darker, but in reality these are temporary conditions for the viewer from Earth.

Black-holes-extra2.jpg

Contrary to common belief, black holes always release matters and release new recycled material into their surroundings; they are not bottomless pits, where everything disappears into them. They are like a funnel, so that if one looks at one end it seems that they are taking everything in, but exactly like a funnel, they have a hole on the other end where what goes in has to come out, with a difference that the end of this funnel is connected to a kitchen-waste unit of the universe, where at on one end it crunches everything up and mixes whatever goes in before spewing the waste out through the waste pipe.

So the behaviour of the black hole is very much dependent on the position of the observer. If one looks from one end they are massive eating machines and from the other end they are the supplier and feeder of new life in the galaxy.

In real term this dark part of the galaxy is at all times emitting electromagnetic waves of varying levels and strength from all the activities which are happing within, around and because of it. Black holes can easily be identified in their environment and their position can be clearly pinpointed by using a much simpler method of detection than just guessing, by looking for their effects in a given 

region of the universe.

In principle the black hole has all the attributes of any system but in fact as the internal plasmatic magnetic energy field of the systems creating it in the given region of the galaxy cannot create outward plasmatic magnetic energy fields that can interact with other plasmatic magnetic energy fields in its immediate given environment, in order to create an outward visible magnetosphere at the boundary of the black hole to manifest itself as a visible space in its region, this leads to the lack of visible light in human Magravs amino acid matter mafs strength.

Black-holes-extra3.jpg

The phenomenon of black hole occurs on a continuous basis on the surface of stars of any solar system. The principle of the creation of black hole happens on a smaller scale on the surface of the Sun in the solar system, where these are called Sun spots.

These are where dynamic plasmatic magnetic fields systems on the surface of the Sun go through the same cycle of interaction of fields with each other as happens for the creation of a black hole in the galaxies. When these plasmatic magnetic fields come across each other in the atmosphere and on the surface of the Sun, they have to interact or pass each other, with the difference that these plasmatic magnetic fields systems on the surface of the Sun, even though they are so powerful, in one way or other meet up with each other and as their energies have to interact, then sometimes these energies cancel each other out and reach a balance magnetic energy condition.

At these points then, the same cycle as the creation of black hole repeats itself on the surface of the Sun on a much smaller scale as there are no magnetic fields interacting because of similarities and identical mafs strength of the interacting fields. There is very little friction of fields to release residual fields in the mafs strength of man’s amino acid strength and thus very little light shows in the region, hence the appearance of the dark spots on the surface on the Sun is observed. In some instances the same phenomenon is created temporarily as due to the balanced pmfs strength of the matters and mafs no interactions between the charged particles and mafs from the surface are produced and consequently there is no or very little emission of light from the surface of the Sun in these regions.

On the surface of the Sun the same scenario of retraction and absorption of matter as in the black hole occurs with a slight variation. In this case the gravitational fields force of the Sun is so powerful and so close that as the gravitational forces of the Sun are (in proportion) many times stronger than the gravitational force of the particles captured within the dark spot region on its surface, once the magnetic fields have interacted and their energies and the content within the catchments area of their forces has reached the equilibrium level, the mass of particles in these regions are sometimes pulled back inward onto the surface of the Sun instantaneously after the collapse of the magnetic fields that created the dark spot regions. At this point the physical matter of plasma in this region of the dark spot is pulled back and literally shot like a missile back into the liquid surface of the Sun, thus creating a secondary dispersal of matter in the atmosphere of the Sun and into the solar system, hence the increase in the Sun flairs during the creation of and as a consequence of the collapse of dark spots on the surface of the Sun.

In reality the plasma of a dark spot is created mainly through interaction of mafs fields of the Sun and these are created very high above the surface of the Sun, so that the dark image observed is not in reality mainly on the surface but much further up in the atmosphere above the real solid surface of the Sun. In other instances, as the plasmatic magnetic energy fields interact to create the dark spot, the surface tension of the dark spot becomes weaker on its face away from the Sun and all sorts of mafs and matters in the full spectrum mafs of the universe get ejected directly into the solar system with much more power and matter than by normal dispersal. Once the temporary condition of a dark spot of the Sun is created, by this time most of the other plasmatic magnetic fields of the Sun physically push and shove the plasmatic passive magnetic fields (PMF) that created the dark spot, so that these external forces in the surrounding environment of the dark spot move and shift it from its position. By this movement there are no more active plasmatic magnetic fields in the region to interact with each other in these regions and then the normal process of the charged particles interacting with the plasmatic magnetic fields around them starts again as before. Then everything goes back to normal and the light or the shine on the surface of the Sun returns to normality.

When too many dynamic plasmatic magnetic energy fields start cancelling each other out, the surface of the Sun become congested with many different plasmatic magnetic energy fields and they clog up the surface of the Sun, like congestion in traffic jams, hence the number of the dark spots starts increasing.

It is important to remember that objects (whether solid, gas, plasmas, etc.) possess their own plasmatic magnetic energy field. All these plasmatic magnetic energy fields on the surface of the Sun are dynamic and respond to other dynamic plasmatic magnetic energy fields that are created internally in the inner cores of the star. These internal magnetic fields are the creators of the gravitational field and the overall magnetic field of the star itself. 

The stronger plasmatic magnetic energy field (the gravitational field) usually dictates and plays a part in the position and level of freedom of the weaker plasmatic magnetic energy field (the object) with respect to each other. Thus when the inner cores of the stars due to their near mono atomic structure go through their internal current realignment (12, 18) this in turn leads to change in the direction of the gravitational field and thus the polarity of the whole star.

Consequently the rotation of the gravitational field which is itself created magnetically interacts with the dynamic plasmatic magnetic energy field areas on its surface and in its atmosphere causing them to move with respect to the internal dynamic plasmatic magnetic energy field movements of the star. Therefore the main reason for sudden periodic increase in the movement of the plasmatic magnetic energy field on the surface of the star and sudden increase in the creation of black spot in their environment can be clearly be identified as being due to the interaction of the dynamic plasmatic magnetic field created by the matters and mafs on the surface and the inner Magravs fields force of the stars.

The inner dynamic plasmatic magnetic field of the star is by order of magnitude several millions of times stronger than the isolated single or packages of dynamic plasmatic magnetic fields on the surface. Thus the stronger inner fields force of the star dictates the direction of the motion of the weaker fields of the dark spot. This is the very reason why the eleven-year cycle of change of polarity of the Sun brings about an increase in the number of the dark spots of the surface on the Sun on a regular basis. This is due to the Sun’s internal plasmatic magnetic energy field changes which bring about the polarity change, about every eleven years. In these phases there are more of these surface and atmospheric dynamic plasmatic magnetic energy fields in motion and available to interact with each other and the internal mafs of the Sun.

In fact as the polarities of the Sun changes, so more dynamic plasmatic magnetic fields start moving from one pole to the other to accommodate the physical practicality of the plasmatic magnetic energy field polar change. Thus a larger number of the dynamic plasmatic magnetic fields come to cross each other’s path and consequently there are more chances of two or more dynamic plasmatic magnetic fields meeting and balancing out each other’s field. Inevitably, as in these areas, there are no effective plasmatic magnetic energy fields for the charged matter to interact with, there is less light emission from these areas of the Sun. Henceforth the appearance of darker areas or dark spots in these areas on the same principle as the creation of the black hole phenomenon.

The increase in the number of dark spots of the surface of the Sun is always in sequence with the period when the Sun’s internal dynamic plasmatic magnetic fields activities go through their repositioning. The number of these dark spots increases and as they move, suddenly a vast number of dynamic plasmatic magnetic fields cancel each other out as the change of polarity of the Sun completes itself and settles down. The whole cycle of collapse of the black hole recurs, in other words where a dark spot collapses and the new plasmatic magnetic energy fields find their total balance, the matters which where gravitationally trapped under the influence of the dark spots, which are mainly plasmas, are retracted by the gravitational pull of the star and are ejected back onto the surface of the Sun in large quantities and numbers. This is the time when there are massive upheavals and strong Sun flares scattering outwards from the surface of the Sun and when large quantities of the Sun’s matters are splashed outward in the solar system. Sometimes as the mass of particles collected in a dark spot is pulled back into the surface of the Sun, due to their mass and speed, these become like meteorites hitting the surface of the Sun. This act causes more charged particles than usual to leave the Sun’s surface into surrounding space. The darkness on the surface of the Sun is not, as is commonly thought, due to cooler temperature in these regions, the dark spots appear purely due to the fact that there are no or very few dynamic plasmatic magnetic fields  available in these regions to interact with the charged particles to create light. So underneath the dark spots on the surface of the Sun the temperature of the surface is still the same as the rest of its surface.

Further comments

Fig. 29: Test reactor.

Helio-seismology is the study of the internal structure and dynamic of the Sun using Sun-quakes. The Sun oscillates continuously by varying degrees and directions and these oscillations are caused mainly by turbulent convection just below the surface. The data from the spherical-symmetrical solar model of the same condition shows close correlation to physical data through inversion. This shows that the data simulation is close to the physical reality of what is happening in the inner sanctum of the Sun. For our testes in dynamic cores and data attained through them, it can be confirmed that rotation and turbulence have a direct effect on the heating of the matter within the confines of a reactor built on the same principles. In the reactor and consequently in the creation of the current through convection and magnetic fields production within it, the turbulence of the matter in the core of the reactor creates the dynamic and the dynamo effects can have a direct effect in and on the production of the dynamic plasmatic magnetic field in the reactor. Turbulent convection and differential rotation in the Sun are thought to be the cause of the creation of the solar magnetic fields and the directions in which these magnetic fields appear to flow out of the surface of the Sun. According to their direction of rotation their tightness these are known as helicity of the magnetic field in the region. Helicity simply describes the handedness of this field as the field literally opens up like a cone as it moves away from the centre towards outer regions. Magnetic and Magravs helicity is in fact a measure of the knottiness and the twistedness of these fields within a region and is closely related to the turbulent dynamo effect. From all observation in the past, in large-scale poloidal magnetic fields the helicity has a direct linkage with a strong toroidal field leading to finite helicity. In the reactor tested on the same basis as turbulence of the mafs of matters, the reactor cores have finite parameters and the rotation and turbulence are predetermined, therefore the helicity of the magnetic fields has to be the same at different points but equal for all distance from the centre. Due to the small size of the core, a mean or average strength or tightness of the magnetic field could be assumed. Thus a point of interaction of two magnetic forces in the cores will create condition similar to a dark spot on the surface of plasma. If the collapse can go through plasma towards the boundary of the core, this can create a sudden surge of dynamic plasmatic magnetic field or it can alter the system’s operating mode.  The reason for writing this paper is the fact that in the reactor designed, if the condition of black hole is created, this can lead to the shutdown of the system or the unstable condition of the operation of the reactor. This has happened on two occasions during testing of the spherical core, where the second magnetic field was deliberately created and positioned to interact with the internal magnetic field created by the core. In both cases the whole system did go through magnetic poles trying to bypass each other. In the second test in trying to prove the principle of the interaction of two magnetic fields and the creation of a black hole condition, the whole system was twisted and the axial pines of the core were twisted off centre. The core axels had to be realigned, but the damage to the core weld and axel proven to be too much to repair, and more or less this test of creation of black holes caused the loss of the first steel prototype core (Fig. 29).  At the same time in the same reactor dark spots due to the interaction of matters were deliberately created for specific use of the system, and investigation into the creation of dark spots and the use of a transition matter condition for the creation of dark matter for the fuel needed for deep space travel was tested and confirmed. This is how these above phenomena, can be explained clearly and the principle for the creation of a black hole can easily be demonstrated. In future papers the writer will explain how the black hole’s effects can be useful in helping to travel through galaxies and in the universe. These are at this moment of time beyond understanding at the present level of scientific achievements.

Conclusion

Fig 30: Letter from the Royal Astronomical Society.

Black holes are natural physical by-products of the motion of forces and matters like every other object in the universe. The only difference for this body to appear is the fundamental shortage or total lack of one of the three main ingredients of creation, namely the lack of the passive magnetic force fields in the region where these black holes manifest themselves.

Black holes are another creation of universe like the uniqueness of the blue planet, and once one has understood the methods of the universe’s powers of creation within all its physical parameters, then every aspect of the appearance of objects and fields can only be explained with understanding of the interactions of these with each other.

The most beautiful part of this phenomenon will be how man will use this knowledge now for the advancement of his race. Understanding of the method of the creation, existence and behaviour of the black hole in space opens new doors for man to plan his future excursions in space and the appropriate name for this object should not be a black hole. These regions of black hole in the galaxies cover areas as large as several solar systems, possessing all the physical attribute of a solar system with the difference that they do not shine due to the lack of appropriate dynamic plasmatic magnetic fields strength within their construction or during the time of their existence in the environment of their operation.

This object has one body and two distinctive characteristics behaviours and appearance, the first characteristic being a gigantic eating machine, and the second characteristic allowing new systems to start from what it has digested. There is an old Aryan name for an arrow with two heads, like the black hole with two characters, and this object is called Zhubeen. I call this unpredictable object in the galaxy with this name, as now it is a known object and not a mysterious scientific phenomenon.

Creation of Motion and Matter Through the Motorless Interaction of Fields

by Stefano Baldassari 
Keywords: field interaction, motion, creation of materials, CH3 discs.

Published: December 2018.

Subject

This experiment aims to replicate the motion of the plasmatic fields as it occurs on every level of the existence in the Universe. The hypothesis is that the interaction of plasma fields of higher order can create a condition of motion at the physical level of the system. The second question for this experiment to answer is - where does matter get created in such a simple system. Is it at a fixed distance from the centre, around the system? Is there a pattern to it? 

Method

This work is inspired by the paper by M.T. Keshe titled “Creation of motion in the Universe” (Keshe, 2014) and his various workshops. This experiment tries to verify if one can replicate this motion by the field interaction and transfer of it into the inertia of the matter state of the system. The following describes the materials used in this experiment, the basic concept behind it and expected results.

Materials

  • CH3 GANS
  • Spray bottle
  • Cardboard
  • Scissors
  • Scotch tape
  • Cotton wire
  • Compass
  • Little container
  • Wood sticks

Concept

Figure 1. Assembling of the system.

In the initial version (v.1) of the system, the proportions of the amino acid chain (COHN) are taken as a reference, representing an existing dynamic system. Rings of different diameter (according to the atomic mass of these elements) are cut and sprayed with the CH3 GANS.

  • 1cm diameter paper disc to replicate atom size of H
  • 12cm diameter paper disc to replicate atom size of C
  • 14cm diameter paper disc to replicate atom size of N
  • 16cm diameter paper disc to replicate atom size of O
Figure 2. Positioning of the external CH3 containers (left) and plastic cover for the system (right).

The four discs of different diameter are assembled as follows. The largest one sits in the base of a little container. A cotton wire is used to hang the two middle discs with a knot under each to fix them to that position. The top (smallest) disc is fixed on top, outside the container with a piece of tape.

The four discs (as in Figure 1) are positioned at different angles so that during the field transfer from the higher (O gradient disc) to the lower (H gradient disc) the fields are subject to compression and expansion as they travel across the different levels. This leads to three layers of free plasma (one layer between each set of adjacent discs) which in totality may lead to matter motion and/or manifestation of fields in matter strength. The last step involves positioning three containers of different volume, filled with CH3 GANS to introduce ‘compatible’ fields into the outside environment of the system – depicted in Figure 2.

Figure 3 . Horizontal CH3 system with 7 discs.

The second version of this system (v.2) follows a different set of principles. Firstly, it operates in the horizontal axis and it’s composed of seven, equal diameter cardboard discs, with different size holes in their center (Figure 3). 

The different hole-size is to create a different gradient in the free plasma which gets created inside each disc, leading to the creation of different materials in between different sections of the entire frame. Such system is placed in a plastic cover, positioned next to the v.1 and put to test for the creation of material – as in Figure 4. 

Figure 4 . The two systems (v.1 and v.2) setup.

Worth noting is the fact that there were couple of other GANSes and GANS productions present in the room. As visible in the background of Figure 4, CO2 production box is positioned on the table, next to the experiment setup. Other GANSes (mostly CH3) are 55cm to 1m away from the center of the experiment setup.

Observations

The first system (v.1) was monitored for 13 days to observe if any change occurs in the position of the discs, which were physically isolated from the environment. A change of position would indicate that the Magrav pressure created between the external environment (three GaNS bottles) and the system is transferred into the matter state. Such physical confirmation would provide a practical understating of the interaction of fields, their positioning and how to operate the future systems. One implementation of this idea is to design a compass to identify sources of high field pressure. V.2 of the system was moved several times but very quickly after stabilizing its position, some matter started to build up around it. In 2-3 days, one could observe multiple, little rocks or grains of some black matter, around the system. 

Results

After 2 days from setting up the system (v.1), some motion was observed but it could have been caused by other factors, which have now been addressed. Further observations with the aid of a 

Figure 5. Matter created around the second version of the system (v.2).

digital camera will follow to verify and quantify the movement, if it occurs under a set of more controlled conditions.

The second system (v.2) was very quick to produce, and still produces (on its own or in combination with v.1), large number of small amounts of black material scattered on the surface of the table, around the setup - Fig. 5. Some pieces of matter were found in a close proximity to the CH3 GaNS bottles (few milliliters) while other were found in the distance between 9 and 11 cm from the center of the system; with one piece observed 65cm away from the system. Some of these react to a neodymium magnet and hence operate in the iron field strength but others are composed of different matter which is yet to be identified. Interestingly, once the material is picked up, it does not appear in the same spot again. Another interesting observation is that after leaving a magnet (acting as an antenna) close to the system setup, the iron material deposit by itself on the magnet. 

Acknowledgements

Thanking M.T.Keshe for the knowledge, Carolina De Roose for her inspirations; Pete W. for the help with preparing this paper. My wife for being patient.

References 

Keshe, M.T. (2014). Creation of Motion in the Universe. Available online https://usastore.keshefoundation.org/store/product/Creation_Motion_Universe/ 

Supplementary material

Pictures and videos of the progress of this experiment can be found in the following folder: https://www.dropbox.com/sh/au8roekownycw87/AADA2Zl0m3_oDP1K7Fq7A36Ya?dl=0

Energy

Gravitational-Magnetic Battery

Battery-intro1.png

Keywords: plasma battery, electronics, school, Romania.

Published: August 2018.

Objective

Gravitational Magnetic Battery, made by D. I., fifth grade schoolboy at I.D, Sirbu of Petrila, Hunedoara county, Romania. Presented at the Minitehnicus County Contest, organized at the Children's Club in Petrosani on 9 June 2018.

Method

Method: Copper wire 2,5 mm nanocoated with flame 4 times. 

GANS used: 

10 ml GANS mix - 40% CH3, 18% CO2, 18% ZnO, 18% CuO. 

Preparation

Classic GANS made with led connection and nano coils covered by the flame method and 10% salts.

Battery-2.png

Setup

We used a 9 cm nanocoated copper wire that was rolled over a paper towel that had a mix of GANS. I wrapped the paper napkin with an aluminum foil in the kitchen of 28 cm long and the width of 7, to which I bent 1 cm (from the end). Aluminum overwrap was 9 turns in anti-clockwise direction with 2 cm zinc wire springs.

Application

This battery was tested at the Minitehnicus contest in date 9 June 2018 in Petrosani city, Romania.

Observations

After this plasma battery was developed, a procedure to improve the result was found by replacing the paper briefcase with cotton disks used for women's cleanser. 

Results

The Minitehnicus contest measured the battery with a multimeter, and the registered value was 0.64 Volti. The responsible student received the diploma of the 1st place.

References

We mention that D. I. requested to be educated with the information from the plasma science and participated in the theoretical and practical workshops that were made by the members of Plasma Hunedoara Study Group, the Local Laboratory in Petrila, coordinated by Giani Marin Boia and Pelacaci Georgeta Emilia, who are preparing 3 high school persons for Vietnamese lab competitions, along with Physics teacher Cindea Nicoleta from Constantin Brancusi Technical College in Petrila. This project is carried out in collaboration between the "Constantin Brancusi" Technical College in Petrila, with the support of the Plasma Romania Scientific Association and the Keshe Romania Association, and National Institute for Research Development for Mining Security and Explosive Protection. Thank you, Mr. Keshe.

Battery-3.png

Transportation

Environment

Efficient Water Purification System Using GANS

by Mosfeq Rashid

Keywords: water decontamination, drinking water, CuO GANS, GANS ball.

Published: November 2018.

Subject

The CuO2 GANS based water purification system presented in this report extends the results of experiments conducted in Ghana[1]. The goal is to create an efficient water purification system which is easy to use even under an adverse condition with limited understanding of Plasma Science and Technology. This study was conducted in Bangladesh, where the consumption of contaminated water often leads to many bacteria- and virus-based conditions and stomach problems.

Method

The approach is to create a method to easily purify water using GANS material without directly handling it. It is particularly relevant where the sufficient expertise of GANS has yet to develop and/or urgency of the situation demands an easily manageable implementation.

Portability can become an important consideration under such circumstances.

The results from Ghana indicate that the CuO2 GANS is very effective in dealing with bacteria, viruses, various organic and metallic impurities.

Figure 1. The spherical GANS containment unit.

Usage

We use a small glass sphere (about the size of a ping-pong ball, as in Figure 1) with a very small amount of CuO2 GANS in it. The ball hangs from the top on a thin, Nanocoated copper wire, inside an 18-liter container (Figure 2).  The container has a tap at 70% mark from the top of it. The water available from city water supply is first poured in the bucket.  

The water is ready for consumption after letting the water sit for 12 to 24 hours for the CuO2 field operation and sedimentation to take effect. The tap on the bucket can then be used to get the purified water out. Given the impurity level of the water in the locality, the bucket is cleaned after an interval of 3 to 4 months. 

Similar to direct contact CuO2. the situation, the presence of sediments does not impact the taste of the water because the sphere with GANS maintains the field.

One of the important aspects of this design is that the ball can be used as a separate reusable unit. A 42mm ball is portable and the user need not to have any knowledge of GANS or plasma field operation to use it. Just ball alone is an independent aspect of this approach. The spherical shape is not essential and other types of glass containers can be used where such glass spheres are unavailable.

Observations
Figure 2. The complete assembled water purification unit.

The baseline for this observation is the use of pure GANS without any containment to purify the water. In addition to the glass sphere, plastic containers were also tested to see the change in water taste. We decided to go with glass sphere after a month of observation to ascertain any of the five people detected any change in the taste of the water. The plastic versions of the balls used were not as effective in terms of plasma field transparency. Our experience in other areas of plasma science applications also indicated that glass is much superior to other materials. In fact, we were unable to detect any difference in water’s taste when in direct contact with GANS and GANS in glass containment. The results are based on the observation of five people over a period of one month.

Our usual approach is to use tap water as the starting point. After purification, the water acquires a sweet taste to it, which is similar to good spring water. It tastes significantly better than any bottled water one can obtain from any of the local markets. We have discovered a surprising aspect of this process: the purified water from one of the major river tastes tangibly better than purified tap water, although the taste of river water is much worse than tap water at the beginning.

Remarks

This approach has been in use for over a year using the same ball and the number of people using and remarking on the taste of the water is now in the range of several thousand.

References

[1] 114th Knowledge Seekers Workshop: GANS plasma-based water purification at Ghana Water Research Institute, 

https://youtu.be/hFPVJx-gGqI?t=6153

Fukushima Decontamination Solution as a Gift for Humanity

This publication is only an excerpt. The entire document can be purchased at the following link: https://usastore.keshefoundation.org/store/product/Decontamination_Solution_Gift_Humanity/    

Keywords: radiation, nuclear, environmental contamination, Japan.

Published: September 2018.  

Introduction

The origin of this paper is based on the first video, which were released by the Keshe Foundation about how simply the radiation and the radioactive contamination in the farms and the environment around the disaster zone of the Fukushima area was shown to be decontaminated, by the use of new materials developed by the M. T. Keshe.

This, after the tsunami of the 2011, after three years can be resolved, simply by the use of basic materials, farmers on their own and by the community can clean up the environment, rather than with the help of the governmental organizations.

The video is available at: https://www.youtube.com/watch?v=4f02CcnHjSk

Experiments

One of our Knowledge seekers performed a series of experiments with decontamination of radioactive materials using procedures developed by Keshe Foundation and materials prepared by us in its Spaceship Institute in Italy. We were connected with and helping her during this experiments over Skype calls. Gamma ray detectors were used. These shortcuts are used for physical quantities:

• A [Bq] … radioactivity, counts of decayed particles per second

• S [Bq / kg] … specific radioactivity, radioactivity per unit weight

Measured values in ( ) brackets are under measurable threshold of the detectors.

Numbers in [ ] brackets refer to attached measurements.

Experiment in food assurance company in Fukushima Region
Fukushima-2.png

Sample 1, March 29, 2014

Contaminated radioactive soil from a rice field.

The soil in a box was soaked with well water (Table 1) and few drops of detergent (to allow better release of radioactive elements into the water) and stirred well (Figure 1). 

The water from the top of the box was poured into a test container so that most of the soil sediments were kept in the box. 

Half of the water from the test container was poured into another test container to remove more soil sediments to get initial water (Table 1).

Fukushima-table1-2.png
Fukushima-table3.png

Part of initial water was treated with cylinder filter with nano layered Copper wires (Table 2) while well water was added to make the filtering simpler (Figure 2-4).

Fukushima-fig2-3-4all.png

The rest of initial water was treated with Copper compounds material in GANS state. (Table 2, Figure 5). Both previous treated water samples were put together to final mixture (Table 3, Chart 1, Figure 6). Last measured decrease in radioactivity of Cs was 33% relative to initial value. Video recording of this experiment is available at: https://www.youtube.com/watch?v=7hCk4HIjzWk&index=5&list=PL2tl5CAdIAVhqirHaZWVlk_v-bBE0oFFb

Fukushima-fig5-6-ch1.png

Sample 2, March 31 – April 3, 2014

Contaminated radioactive water extracted from a rice field soil with the help of iron […]

Experiment in NPO in Fukushima city

Sample 1, March 30, 2014

Contaminated radioactive soil from a roof gutter […]

Sample 2

Contaminated radioactive water […]

Experiments Summary

Over the measured period of time, all methods showed decreased values of radioactivity in the samples. This decrease was caused by direct transformations of the radioactive material and not by separating the radioactive material by any method of absorption out of the samples (except the cases with nanolayer filters of course). These experimental verifications of the decontamination technology have to be further developed in cooperation with people willing to take part in the global clean up. We are here to help in this process and learn more together to achieve simple real-world application of the disclosed decontamination process.

Knowledge gained

[…] The conclusion from the development of new materials and their use in the contaminated environment of Fukushima and any other reactive environment, like a nuclear waste disposal and storage is as follows:

1. All radioactive contaminated environments and materials can be made fully and permanently radiation safe.

2. The new process of decontamination can bring about new opportunities to convert the radioactive materials to useful and applicable materials, which can be used for scientific development, agricultural use, and energy production for conversion of matters.

3. These tests have shown without a shadow of a doubt that the Japanese Fukushima disaster of 2011 can be used to the advantage of the nation and not as it looks, as a disadvantage and a financial burden.

4. All underground storage facilities and nuclear waste problems of today can be solved with little effort and little cost by the use of these new materials, and there is no need for these heavy radioactive materials to be kept in storage for hundreds of years for them to be less radioactive, now one can safely use the by-products of decontamination for the production and their use in agriculture and material production rather than wasting money to store them for years on end.

5. The test shows clearly that The Fukushima plants we use for the production of plutonium. As a nuclear engineer and being involved in the promotion of peace, I see this as unacceptable and against the present agreed international laws of the proliferation of the UN charter. These tests have shown a new and brighter life for humanity and hopefully, as a race, we become stronger with the gained knowledge. […]

Fukushima-chineese-new.png
Fukushima-chineese-new2.png
Fukushima-chineese-new-3.png

Food and Agriculture

Keshe Foundation Plasma Technology Resolves the African Swine Fever Problem in China

by M.T. Keshe, 28th of November 2018.
Keywords: pigs, virus, plasma water, liquid plasma, animals, farmers, food security.

Published: December 2018.

This article is also available in: polish.

Subject

The main purpose of the space plasma technology developed by Iranian nuclear scientist Mr. Mehran Tavakoli Keshe is to free man from the restrictions of energy, water, food, oxygen, medicine, and so on, to travel and live freely in space. In space-medicine, plasma technology can protect humans from all kinds of space viruses, because in space there are only viruses, no bacteria as in space there are no amino acids, and viruses are essentially energy packs that attach themselves to proteins.

This was never understood by the present science and that has been the reason why we could find no solutions for viruses. With this new understanding and explanation of the true knowledge of viruses by M.T. Keshe, now we can solve all problems with viruses worldwide, regardless of any strand of viruses or its strength. This is the major breakthrough which brings a new horizon to the life of man on this planet and in space. The discovery of the true process of creation of viruses and life of virus and its solution with the simple use of plasma water developed by M.T. Keshe, now ends the period of man becoming ill from viruses and these heralds a new beginning in the world of medicine. 

Viruses are the greatest threat to the life of man in space. The processing of African Swine Fever virus is the best verification and confirmation of M.T. Keshe’s plasma technology. 

African Swine Fever is a disease transmitted by an arthropod (soft ticks) carrying the virus, after biting pigs. Typical symptoms after infection in pigs are flushing skin and extensive visceral bleeding. African Swine Fever virus has three classifications: virulent strain, medium strain, attenuated strain.

Pigs infected with virulent strains have obvious clinical symptoms and may have a mortality rate of 100%. If infected with medium or attenuated strains, pigs may be resistant to the infection, or they may have almost no clinical symptoms, and they will only show antibody positive reactions when testing the serum.

African Swine Fever has been a global threat since it was first discovered in Kenya in 1921. Since its arrival on the Iberian Peninsula in the 1950s, the African Swine Fever epidemic has maintained a trend of eastward expansion from the European continent, and the spread rate of the variant virus has been even more alarming since 2007.

Since about a decade ago, the African Swine Fever (ASF) has spread rapidly in Russia, Ukraine, Poland and other Eastern European countries, with more than 5000 outbreaks in a decade. This has resulted in significant losses in the livestock industry of all countries, as can be seen from the experience of Russia alone.

In 2017, Russia culled as many as 2 million pigs, accounting for nearly 1/10 of all raised meat pigs across the country. In the past decade, Russia's direct economic loss from pig deaths alone amounted to 70 million USD, and the indirect economic losses were even more incalculable. What is more frightening, however, is that Russia has paid a huge price, but the epidemic has not been eradicated.

Unfortunately, the swine fever strain found in Irkutsk, Russia, in July was found in problematic pigs in northeast China. Since August 2018, African Swine Fever has been introduced into China from Russia and has spread rapidly in China from the northeast. 

At present, there has been a full-scale outbreak in more than 20 provinces and cities throughout the country, and more than 500,000 pigs have been slaughtered. However, the spread of the momentum has not slowed, every day there are new outbreaks. 

Most importantly, there is no vaccine inside and outside of  China to immunize and no medicine to treat the disease.

Method

The newly developed plasma technology developed by Mr. Keshe of Keshe Foundation, which originally was tested by the scientists of South Sierra Leone university on Ebola and showed 100% effectiveness of the technology by eradication of the virus is now applied to the swine fever. 

The new space plasma technology uses plasma water to rapidly release the virus's energy pack, eliminating it within a short time. During testing in Austria, the plasma water that was produced showed 10 times more germicidal action than any antibiotic available in the world of medicine today.

As early as August of 2018, when the outbreak of African Swine Fever started in China, Mr. Keshe was very concerned and recommended to apply the new space technology know-how to help China solve the problem. However, because this technology is too advanced, despite contact with relevant departments, the elevant personnel understood the application and implication, but did not report to the higher authorities. Containing outbreaks of swine fever is entirely government-led. Once discovered, the whole outbreak area of swine fever is under martial law and all pigs are slaughtered as there has been up to now no solution. So it has been difficult to find sick pigs for field testing.

By the request of Mr. Keshe from the Keshe Foundation to help to eradicate this national problem, which is endangering the national food security in China,  the followers of Keshe Foundation in China started to look for small farmers who could have animals which had caught the virus, so that the new plasma technology could be tested. In this process, a pig affected by this disease was located in mid-November and the plasma water newly developed by M.T. Keshe was shipped to the location on 22nd of November 2018. On Friday morning of 23rd of November, the first plasma water was fed to the pig.

Pictures of the pig before processing on 22nd of November 2018.
Pigs-2.jpg
Pigs-3.jpg
Pigs-4.jpg

Within the first 12 hours, the pig shows a clear first stage of recovery, and the second day was fed for the first time with cooked food which she refused to eat since affected. By the third day, the ears have risen from the folded position. By the fourth day, after three months, the pig produced the first excrement. From the outset of starting this process, Mr. Keshe explained to the farmer that the only way we know the virus has cleared out of the body, was if the pig produces the first excrement. That shows the body has gone back to the full operation and the virus is eradicated. This proves the correctness of applying the new plasma water for the eradication of the virus.

Test Process:

The farmer reported that an outbreak of African Swine Fever began in the village in mid-August, with more than half of pigs of the families in this country suffering from swine fever disease, while other sick pigs all died or have been killed.The farmer raised a total of two pigs, all had the symptoms of fever, no eating food, black and dry hard stool. One died on 19th of September 2018 and buried. The other pig, which did not eat food, just drank some water. Occasionally ate a little raw cabbage or radish. After more than 3 months, weight from more than 200 half kg fell to less than 120 half kg, dying, barely surviving.

Application

On 22nd of November 2018, the farmer received the plasma products sent from Keshe Foundation. The farmer diluted the plasma material with water at the ratio of 1:10, and then he used only the pure water on the surface of the residue of the mix. The farmer used this water to clean and disinfect the pigsty on the morning of the 23rd of November, and also fed the pig with plasma water and sprayed the body parts. As the pig was kept in open pigsty, the local temperature would be as low as minus 7 degrees at night, and the pig was very weak. At first, they only sprayed plasma water on the pig's stomach. The next day, the pig's back was sprayed with the plasma water, and the third day, the pig's head was sprayed with the plasma water, thus preventing the pig from being too weak to bear the cold.

After one day of drinking the water, on the evening of the 24th of November, the pig ate two bowls of rice for the first time in three months. In the evening, the pig began to gather the grass to make its own nest for the first time. On the 25th of November, the pig ate noodles and rice once each, and the pig was more active. The pig began to defecate for the first time in three months since the beginning of the disease, on the 26th of November, excreting red stool. Farmer was instructed to disinfect the stool with plasma water and bury it. Defecation means that the virus in the pig's body was cleaned out, and the body function begins to recover. On the 27th of November, the pig asked for more food, five times, two bowls of rice each time, and defecated a smooth red stool. 

On 30th of November 2018, the pig defecated normal black excrement and the water boils on the skin fell off. Mission accomplished. 

23rd of November 2018, pig drank plasma water and ate cabbage. 

25th of November 2018, pig ate rice and noodles. 

26th of November 2018, pig ate cooked food. 

26th of November 2018, pig excrement for first time in three months (sign of recovery).

27th of November 2018, pig asked for food 5 times, ate 2 bowls each time.

27th of November 2018, pig defecated red and smooth excrement. 

On 30th of November 2018, the pig defecated normal black excrement and the water boils on the skin fell off. Mission accomplished!

23rd of November 2018, pig drank plasma water.
23rd of November 2018, pig ate cabbage. 
25th of November 2018, pig ate rice and noodles.
26th of November 2018, pig ate cooked food.
26th of November 2018, pig excre- ment for first time in three months (sign of recovery).
27th of November 2018, pig asked for food 5 times, ate 2 bowls each time. On the right: red and smooth pig's excrement.
On 30th of November 2018, the pig defecated normal black excrement and the water boils on the skin fell off.

Observations

The whole process lasted 7 days. It took 24 hours to see eating, recovery and other signs of improvement. The process is also very simple and easy to apply. Farmers only need to spray pig houses with plasma water, give water and spray the pigs. 

The cost of this process is very low, could be as low as 20 RMB per pig can save the animal. And this process from now on can be used for all types of virus infection for birds, animals and humans as it is a product of nature and it is not chemically produced. This is the way the universe energy is transferred and now we understand that the virus is an energy pack attached to microorganisms, bacteria and amino acids. 

Now by using this new plasma technology which is the natural plasma magnetic fields process, the energy pack of the virus is transferred and so depleted from the cell of the animal and the health of the animals or humans return back to normal.

This is the major breakthrough in the world of science and the first step for man to start to be able to handle any energy packages which might endanger the life of man in the space.

In the vast rural areas of China, there are many poor families. Pigs are the only source of the meat and the main source of income for a family. If pigs die of illness or are killed directly, the family falls into trouble again, and some families return to the edge of absolute poverty. His Excellence President Xi's task of overcoming poverty will face more challenges. As the spread of disease and mass killing of pigs has caused a disastrous blow to China's animal husbandry industry, with heavy losses on farms that will have a major impact on China's economy and Chinese national food security.

The space plasma technology developed by the Iranian physicist M.T.Keshe of the Keshe Foundation, is simple and can quickly eliminate the virus in a very short time. Prevention and treatment can eradicate the spreading of the virus. 

The processed pigs are immune to recurrence. The Plasma technology can provide a cheap, simple and fast solution for solving the problem of swine fever in many countries. It can be proven that even the slaughtered meat of the contaminated animals can be washed or processed with the same plasma water for the virus to be removed from the meat before entering the food chain. 

We look forward to this advanced technology being adopted and promoted by the government as soon as possible, in order to solve the urgent problem.

Acknowledgments

Thank-You letter from the farmer.
Pigs-12.jpg
Pigs-13.jpg

Page 1: 

Two pigs in one yard, did not eat, had fever and defected black round excrement. They got sick in the middle of August. One pig died on 19th of September and we buried it. The remaining pig just drunk water and ate little cabbage and radish to survive. The weight of the pig dropped from more than 200 half kilograms to 120 half kilograms. Until 22nd of November when the GANS material was received. We start to feed the pig from 23rd of November, diluted the material at 1:10, fed the pig and sprayed on the body of the pig. In the night of 24th of November, I fed her two bowls of rice and she started to eat. I fed her in the morning and at night. The pig felt hungry and started to ask for food. The pig started to defecate, and the excrement are color of rust. The pig is in recovery now.

Page 2:

Thank you for sending us the GANS material to save this pig. (The address and the name of the farmer are intentionally marked black.)

Written in the night of November 26th  

Pigs-14.jpg

References

On 29th of November the Keshe Foundation presented the FARMING BLUEPRINT DAY as the major breakthrough in the world of science. The playlist to the video recordings presenting the pig 

development as well as the documents presentation can be access on the Keshe  Foundation YouTube channel or by clicking the following links:

https://www.youtube.com/watch?v=Dde5uAKthJE&list=PLpCKWzA-bp9s0qHaOOB3shYJ81LpgCdlt

https://youtu.be/Dde5uAKthJE 

Plasma in Agriculture: Cultivation of corn for experimental purposes 

Calarasi county, Romania, June - August 2018 by Barbu Constantin, Scientific Association Plasma Romania

Keywords: increased harvest, CO2, CuO, CH3, liquid plasma irrigation.

Published: November 2018.

Subject

In June 2018, two fields of corn were sown at a distance of 50 meters from each other. One was the control group with no plasma treatment, the other one was subject to plasma technology. The results of this experiment are presented herein.

Figure 1. Jar with CO2 GANS, irrigation system, corn, and pepper.

Method

In this experiment, the plasma technology was applied to the cornfield. Prior to sowing, three, 400ml jars of CO2 GANS and liquid plasma (10ml of GANS, topped up with spring water as in Figure 1) were placed into the ground in a geometric triangle formation, 3 meters apart, with the intention of feeding the plants. 

The subject corn culture, together with the control group, were watered with spring water via a drip irrigation system. Twice a week, the experimental group was additionally watered with liquid plasma mixed with spring water, following this schedule: 

  • Day 1: 250ml of liquid plasma (10% CO2, 90% ZnO) mixed with 5 liters of spring water,
  • Day 2: 250ml of liquid plasma (80% CO2, 20% CH3) mixed with 5 liters of spring water,

The above schedule was repeated on a weekly basis until harvest.

Application 

The nano-coated copper material for the GANS production was prepared following the caustic soda method with an addition of potassium hydroxide (laboratory procedure for 23 days).

The GANS production boxes were made in a classical way, with the green led connection between the plates and 10% NaCl distilled water solution. The complete procedures for Nano-coating the copper and GANS production is available on www.PlasmaRomania.ro in any language.

Nov-11-3.jpg
Nov-11-4.jpg

Observations

The color of the corn plant is intense green, and the color of corn without plasma is more green-yellow (Figure 2). The height of the corn watered with liquid plasma is about 3 meters, and the corn watered with the spring water only is about 1.5 meters. Differences in the size of the cob are also noticeable, where the plasma-fed ones are longer and thicker. Owners of the field said that they never had such a high corn in their garden and all the crops that were planted alongside the corn have grown bigger and with a healthy color.

Acknowledgments

Special thanks go to Mr. Keshe for teaching us this beautiful knowledge and to my parents who tested the plasma technology on their own cornfields.

Original submission (text and pictures): https://www.facebook.com/groups/MGQBucharest/permalink/1103175426496736/?__tn__=-UC-R

Plasma Applications in Agriculture 

By Gatua Wa Mbugwa, Ph.D., August 14th, 2017   

Keywords: GANS irrigation, oats, medicago rigidula, plants, CO2, diseases, pests.

Published: September 2018.  

Pre-sowing Seed Soaking

Pre-sowing seed soaking in CO2 GANS liquid plasma decontaminates and restores vitality to adulterated or disease infected seeds, thus ensuring healthy and faster-growing crops.

Irrigation of field crops with CO2 GANS liquid plasma

In the field, irrigation of plants with CO2 GANS liquid plasma virtually eliminates the need for fertilizers and pesticides. In addition to CO2 GANS liquid plasma, CH3 and ZnO GANS liquid plasmas also enhance the growth of crops. CH3 liquid plasma enhances crop growth by giving energy while ZnO liquid plasma enhances plant emotions and crop health. Various researches have shown faster, healthier, and early maturity of crops whose seeds were soaked in CO2 liquid plasma. Further, crops that were soaked before sowing and subsequently irrigated with CO2 liquid plasma alone or in combinations with either CH3, ZnO, or both CH3 and ZnO GANS liquid plasmas consistently showed significantly faster growth, early maturity, and increased health.

Relative growth of Oats: Oats plants irrigated with H2O (left) and oats plants irrigated with CO2 GANS liquid plasma (right) – seeds of the two treatments were soaked for 3 hours before sowing in water (left) and in CO2 GANS liquid plasma (right). Both crops were sown on 5/21/17, and the pictures were taken on 8/6/17.

Magnetic gravitational fields effects of CO2 GANS liquid plasma on plant growth 

Research on the effects of magnetic gravitational fields of various liquid plasmas has shown improved growth, early maturity, and improved health similar to that shown by CO2 GANS liquid plasmas. In Kenya, oats plants that were exposed to fields of bottled CO2 liquid plasma grew faster, matured earlier, were healthier, and had a darker green color than oat plants that were not exposed to CO2 liquid plasma magnetic gravitational fields.

Effects of CO2 GANS magnetic gravitational fields on growth of oats: Oats seeds were soaked for 3 hours before sowing on 2/28/17. These pictures were taken on 3/25/17 (left), and 8/6/17 (right).    

Changes to soil pH with CO2 liquid plasma enhances crop adaptation and growth

Irrigation of crops with CO2 GANS liquid plasma increases alkalinity in soils resulting in increased soil pH. Increased soil pH, in turn, supports the growth of plants that are usually well suited for alkaline soils in areas with acidic soils. An ongoing study in an area with acidic soils in Kenya has shown vigorous growth and successful seeding of Medicago rigidula plants. Medicago rigidula usually grows in Mediterranean type climates that have alkaline soils. 

Vigorously growing Medicago rigidula plants with seed pods in Kenya. Plants were sown on 1/27/17, and the picture was taken on 8/10/17.

Effects of CO2 GANS on crop diseases and pests

For plant diseases, CO2 GANS liquid plasma creates conditions in the plant environment under which those diseases cannot exist. For example, CO2 GANS patches have been successfully used against diseases as well as plants’ physical injuries. For crop pests, application of CO2 GANS liquid plasma creates conditions under which the pests do not damage crops. In addition, pests also absorb the energy of the applied CO2 GANS liquid plasma. Such pests have little or no need of feeding on the crops, thus the application of CO2 GANS liquid plasma creates conditions that benefit both the crops and their erstwhile pests.

Effects of CO2 liquid plasma on crops and the environment

CO2 GANS are increasingly used to transform agriculture and environmental management practices across the world. While CO2 GANS liquid plasma is now widely used to decontaminate seeds and for irrigating field crops, it has also been shown to clean the environment in new ways. A study in a hydroponic farm in Australia found that bottles with CO2 GANS liquid plasma that were placed in pipes channeling chemical nutrients for plants attracted and held the smell of the chemicals within, and thus cleaned the crop environment. The smell was only noticed when the CO2 liquid plasma bottles were opened, showing that CO2 GANS liquid plasma has great potential for environmental clean-up for not only crop environments but also for polluted cities and other such environments.

Effects of Co2, CH3 and CuO Liguid Plasmas on Early Seedling Growth of Oats and Maize

By Gatua Wa Mbugwa, Ph.D. May – June 201

Keywords: liquid plasma, plants, CO2, CH3, CuO, seed germination.

Published: September 2018.  

Introduction 

Liquid plasma experiments conducted in Kenya in May and June 2016. These experiments assessed oats (Avena sativa) and maize (Zea mays) percent seed germination and early seedling growth.

Treatments 

Experiment 1. Oats: H20 and CO2 liquid plasma 

Experiment 2. Oats and Maize: H20 and CO2 liquid plasma 

Experiment 3. Oats: H20, CO2 CH3, and CUO2 liquid plasmas 

All experiments took 21 days from sowing to data collection.

Seed Germination Method 

Experimental seeds were set in paper plates (exp. 1) and in plastic containers (exp. 2 & 3) and irrigated with their respective treatments (H2O or one of the thee liquid plasmas). Irrigation was 10 to 20 ml of the substrate using a plastic syringe, which was continued as needed until DODC.

Experimental Design 

Treatments were assigned in a randomized complete block design (RCBD). Treatments were replicated 4 times

Data Collection 

Germinated seeds in each experiment were counted to determine relative % germination rates for the experiments. Further, shoots and roots of experimental seedlings were measured, and their lengths compared to determine their relative early growth. 

For shoots and roots length, means of all 4 replicates in each experiment were calculated and are presented as the results of the three experiments.

From left: A) Experiment 1: Oats; B) Experiment 2: Sowing of Maize Seeds; C) Experiment 2: Oats and Maize Seedlings; D) Experiment 3: CO2, CH3, and CuO2 GANS

Experimental Results

Results for Experiment 1: Oats (Avena sativa). H2O and CO2 Liquid Plasma treatments. 

Effects-exp1.png

No significant differences in relative shoots and roots length between H2O and CO2 Liquid Plasma treatments.

Results for Experiment 2: Oats (Avena sativa) and Maize (Zea mays) with H20 and CO2 Liquid Plasma treatments. 

Effects-exp2.png

No significant differences in relative shoots and roots length between H2O and CO2 Liquid Plasma treatments.

Results for Experiment 2: Oats (Avena sativa) and Maize (Zea mays) with H20 and CO2 Liquid Plasma treatments.  

Effects-exp2-2.png

No significant differences in relative shoots and roots length between H2O and CO2 Liquid Plasma treatments. 

Results for Experiment 3: Oats (Avena sativa) with H2O, CO2, CH3, and CuO2 LP treatments  

Effects-exp3-1-3.png

Significant differences in shoots and roots length between H2O and CO2 Liquid Plasma treatments. 

No significant differences in relative shoots and roots length between H2O and CuO Liquid Plasma treatments.

Significant differences in shoots and roots length between H2O and CH3 Liquid Plasma treatments. 

Experimental Results

Percent germination 

Exp. 1 Oats: H2O (100%) CO2 LP (100%) 

Exp. 2 Oats: H2O (87.5%) CO2 LP (87.5%) 

Exp. 2 Maize: H2O (75%) CO2 LP (75%) 

No significant differences in seed % germination between H2O and LP treatments within experiments 1 & 2 

Percent germination 

Exp. 3: Oats: H2O (65%) CO2 LP (85%) 

Exp. 3: Oats: H2O (63%) CH3 LP (80%) 

Exp. 3: Oats: H2O (68%) CuO2 LP (65%) 

Significant differences in seed % germination between H2O and LP treatments within CO2 and CH3 treatments in experiment 3.

Summary of Experimental Results 

There were no significant differences in both % seed germination and seedling growth in experiment 1 and 2.

In experiment 3, CO2 and CH3 LP treatments showed superior % seed germination and superior mean seedling growth for both shoots and roots, while CuO2 treatment did not show any significant differences.

Discussion and Conclusion 

It was generally noted that while experiment one had 100% germination rate, both experiment 2 and 3 recorded lower seed germination rates of approximately 80% and 70% for experiments 2 and 3 respectively. 

This poor germination rate may have adversely affected mean seedling length in Exp. 2 & 3. It was further noted that the 100% germination occurred in experiment 1, where seeds were sown in open (flat) paper plates. 

The seeds sown in plastic containers in exp. 2 and 3 may have reduced their germination rate to avoid overcrowding in their containers, indicating that plants intelligently adapt to environmental conditions.

Family and Relationships

Emotions and Soul