Difference between revisions of "CO2 GANS"

From Keshe Foundation Wiki
Jump to: navigation, search
(destilled changed to clean water)
 
(26 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{GANS navigation table}}
 
{{GANS navigation table}}
__Toc__
+
__TOC__
 +
 
 +
 
 +
 
 +
In order to expand knowledge around the whole topic of GANS, the "Basics of production and processing of GANS" provide a compact overview.
 +
 
 
<div style="clear:both;"></div>
 
<div style="clear:both;"></div>
(see also: [[The 4 Main GANSes and Amino Acids#CO2 GANS .2F Basic Box setup|The 4 Main GANSes and Amino Acids]])
 
  
==== Production ====
+
== Production ==
[[File:CO2 GANS box setup.jpg|thumb|CO2 GANS Box Setup: The Setup here on the picture with led is the best option to produce a very good quality of GANS. ([emergency situations only (lower quality): If there is no led to connect the wires, you can use two Nano-coated Copper wires and twist them counterclockwise together. If you have only not Nano-coated Zink wires, you have to use one led!]]]]CO2 GANS is produced by placing a Zinc plate, connected to a [[:Category:Nano-coating|Nano-coated]] Copper coil or Nano-coated Copper plate, in a [[Important information about Salt|Salt water solution]]. Dissolve 50 grams of Salt in a liter of distilled water and pour the solution into a GANS collection container. Ensure all of the Salt is dissolved. There are different ways in which to connect the Zinc and Copper plates or coils together, which will affect the ratio of CO2 to Zinc ([[ZnO GANS|ZnO]])GANS produced. In the following video Mr Keshe explains in detail how to produce CO2 GANS:
+
[[File:CO2 GANS box setup.jpg|thumb|CO2 GANS Box Setup: The Setup here on the picture with led is the best option to produce a very good quality of GANS. ([emergency situations only (lower quality): If there is no led to connect the wires, you can use two Nano-coated Copper wires and twist them counterclockwise together. If you have only not Nano-coated Copper wires, you have to use one led!]]CO2 GANS is produced with a Zinc plate connected to a [[Nano-coating using NaOH|Nano-coated]] Copper plate (or Copper coil) in a 5% [[Important information about Salt|Salt-water solution]]. For example, 50 grams of Salt are completely dissolved in one liter of clean water and emptied into the plastic box. The plates should be approx. 80% in the water, 2cm above the bottom of the container and 4 to 7cm away from each other. The plates are connected through a Nano-coated Copper wire and a Copper wire. There are two different variants for the production of CO2 GANS. ('''CAUTION''': never drink GANS or touch with any part of the body). 
 +
 
 +
[[File:Green led - Anode Cathode.jpg|thumb|Green led: Anode (+) / Cathode (-)]]
  
<youtube width="400" height="220"> https://www.youtube.com/watch?v=D12PKWEo7iY </youtube>    <youtube width="400" height="220"> https://www.youtube.com/watch?v=pNyVYf8vTPc </youtube>
+
=== Required materials ===
=====CO2/ZnO GANS mixture,  in a ratio of 20:80 =====
+
* Plastic box
To create a higher yield Zinc to CO2 GANS, the Nano-coated Copper plate/coil is connected directly to a Zinc plate with a piece of Nano-coated Copper wire. (Through the use without a led the quality is not the best, so it is maybe to produce seperatly CO2 90/10 GANS, ZnO GANS and mix them in the right proportion together. For emergency situation it is definitely useable.)  If  you wish, you can drill a small hole at a top corner of each plate to hook the wire to, however, ensure you drill the hole in the Copper plate PRIOR to Nano-coating it.  Or, you can use alligator clips to attach them together.  ('''NOTE''': ensure you do NOT scratch the Nano-layer off of the Copper plate with the alligator clips.  Clips with especially strong metal spring will damage the Nano layered surface).  Make certain the bottom of the plates or coils do not touch the bottom of the container. In this direct connection method, GANS is created very quickly.  However, the amount of CO2 GANS created is relatively low in respect to Zinc GANS created within the GANS mixture. (NOTE: GANS that is white in colour has a higher content of ZnO in it than CO2). ('''CAUTION''': never touch GANS with any part of the body).
+
* Clean water
 +
* [[Important information about Salt|Salt]] (50 gram Salt on 1 liter water)
 +
* Green led
 +
* Nano-coated Copper wire
 +
* Copper wire
 +
* Nano-coated Copper plates or coils
 +
* Zinc plate  
  
=====CO2/ZnO GANS mixture in a ratio 90:10 =====
+
<br>
Zinc oxide GANS (ZnO) can not be completely eliminated from the GANS mixture when creating CO2 GANS, but this is of no consequence. However, if you follow these steps, a higher yield of CO2 to Zinc oxide GANS will be created.  The colour of the GANS created is an indication of what type of GANS has been created.  A white coloured GANS indicates more Zinc GANS in the mixture while a cream coloured GANS indicates a higher yield of CO2 GANS created within the mixture.  [[File:Co2-mit-LED 99 01.jpg|thumb|Washed CO2-GANS with green LED, generates far less and shows structure. Yield after 4 days.]]A Nano-coated Copper plate and Zinc plate are connected together with a regular piece of Copper wire.  Ensure the bottom of the plates or coils do not touch the bottom of the container. Cut the wire at the mid point and connect a small Led light, or coil of a PC fan, to the ends of the cut wire.  Connect the anode (longer piece of wire = positive pole) of the led with the wire that leads to the coated plate/coil, and the cathode (notch or shorter needle on Led package = negative pole) with the wire that leads to the Zinc plate. (Small holes can be drilled into one corners of each plate, PRIOR to the Nano-coating process in the case of the Copper plate, that can be used to connect the wire to the plates.  You can void drilling holes in favour of using alligator clips to connect the led to the plates, however, it is VERY IMPORTANT to ensure you do not scratch off or the Nano-coating of the Copper plate when attaching the clip).  After a few hours, a cream coloured layer of CO2 GANS will starts to settle on the bottom of the container.  (Further note: the colour of the GANS denotes the ratio of CO2 to Zinc GANS in the mixture. ('''CAUTION''': never touch GANS with any part of the body).
+
<gallery>
 +
File:GANS basic box setup (CO2).png|(CO2) GANS basic box setup
 +
File:CO2 GANS bottle.jpg|washed CO2 GANS in a bottle
 +
File:Co2-mit-LED 99 01.jpg|dried CO2 GANS
 +
</gallery><div style="clear:both;"></div>
 +
{| class="floatright" background:#F9F9F9; "
 +
! style="font-size:85% " |The Keshe Foundation CO2 Capture KIT (Part 1)
 +
|-
 +
| <youtube width="400" height="220"> https://www.youtube.com/watch?v=D12PKWEo7iY </youtube>
 +
|}
  
Required Materials:
+
{| class="floatright" background:#F9F9F9; "
* Plastic tub/container or cut bottle
+
! style="font-size:85% " |Complete explanation of Creation of CO2 and CH3
* Zinc plate
+
|-
* Nano-coated Copper coil or Nano-coated Copper plate
+
| <youtube width="400" height="220"> https://www.youtube.com/watch?v=pNyVYf8vTPc </youtube>
* A length of copper wire.
+
|}
*      Green led
+
===CO2/ZnO GANS mixture in the ratio 90:10 ===
* 100gm of salt
 
* 1L of distilled water
 
[[File:491 LED1.jpg|thumb|Connections of LED, but please use a green LED!
 
]]<gallery>
 
File:Zinkplatten02.jpg|Zinc plates (from a tinner/tinsmith); with a magnet you can distinguish pure metals, as zinc, copper, brass, .... no magnet will stick on them.
 
File:Zinkplatten.jpg|You should get into the habit to bend back all "ends" of ALL wires (make a loop) so that the energy flows back into the metal.
 
File:Gansflascheled.jpg|Connect the metal with a green LED. In this case, alligator clips (Red & Black) soldered to the poles of the LED for the poles of the LED not being damaged
 
File:Gansflaschesauerstoff.jpg| Optionally: Addition of oxygen stimulates the production.
 
</gallery>
 
  
====CO2 GANS: Uses/Applications ====
+
During the production of CO2 GANS, a proportion of ZnO (Zinc Oxide) GANS is always also produced. The term CO2 GANS refers to the variant in which CO2/ZnO GANS is produced in a ratio of 90 to 10. The low proportion of ZnO cannot be ruled out, but does not play a role. To produce this GANS, a green led is placed between the connecting wires of the Nano-coated Copper plate or coil. (See picture). The long end of the led (+ pole) is connected to the connecting wire of the Nano-coated Copper plate and the short end (- pole) to the connecting wire of the Zinc plate. This CO2 GANS is creamy, grayish white, the plates should hang about 2cm above the ground and the connecting wires above the water should not touch the water. After a few hours the GANS will form between the plates and settle on the ground after a while.
  
 +
=== CO2/ZnO GANS mixture in the ratio of 20:80 ===
 +
No led is placed between the connecting wires of the plates. The two connecting wires must be Nano-coated and turned together counterclockwise. The production of this mixture works very quickly, but the CO2 content is low in relation to the Zinc content. However, it is important to pay attention to the purpose for which this GANS is produced, as it is mainly a ZnO based GANS. In addition it is produced without led and one can consider whether one does not produce a CO2 GANS and a ZnO GANS with led, in order to mix it proportionally correctly together.
  
CO2 GANS water can be used pure or diluted depending on the treatment requirement.  It will activates cells, revitalizes the body and strengthens the immune system.  CO2 GANS water is very beneficial to all kinds of muscle injuries.  When used as a spray it immediately relieves pain.  However, in the case of a broken bone(s), do not apply CO2 GANS water directly to fracture(s).  Pain at the point of a bone fracture triggers the body to bring needed Calcium to the area of the fracture that is required for the healing process.  Therefore, do not spray directly on the fracture point; spray the area around it.   
+
<div style="clear:both;"></div>
 +
 +
==CO2 GANS: Uses/Applications ==
 +
 
 +
[[Category:GANS]]
 +
 
 +
CO2 GANS-water can be used pure or diluted depending on the treatment requirement.  It will activates cells, revitalizes the body and strengthens the immune system.  CO2 GANS-water is very beneficial to all kinds of muscle injuries.  When used as a spray it immediately relieves pain.  However, in the case of a broken bone(s), do not apply CO2 GANS-water directly to fracture(s).  Pain at the point of a bone fracture triggers the body to bring needed Calcium to the area of the fracture that is required for the healing process.  Therefore, do not spray directly on the fracture point; spray the area around it.   
  
 
* Oral Application: CO2 GANS water can be taken orally (Eg. drops or 5ml to 25ml in half a liter of water - 1 to 2 times daily (according to the recommendations).
 
* Oral Application: CO2 GANS water can be taken orally (Eg. drops or 5ml to 25ml in half a liter of water - 1 to 2 times daily (according to the recommendations).
Line 39: Line 59:
 
* Foot Bath Application: Add CO2 GANS water to lukewarm water in a foot bath.  When repeatedly applied this eliminates athlete's foot and pulls heavy metals out of the body.
 
* Foot Bath Application: Add CO2 GANS water to lukewarm water in a foot bath.  When repeatedly applied this eliminates athlete's foot and pulls heavy metals out of the body.
  
* Full Bath Application:  You can use CO2 GANS water AND the GANS waters of [[ZnO GANS|ZnO]] (Zinc oxide), [[CH3 GANS|CH3]] (Iron oxide) and/or [[CuO GANS|CuO]] (Copper oxide).  For example, with radiation contamination, Keshe recommends taking a bath with 2 to 3 litres of CO2 GANS water in the bath mixed with warm water, and staying in this water for half an hour 2 to 3 times a day.
+
* Full Bath Application:  You can use CO2 GANS water AND the GANS waters of [[ZnO GANS|ZnO]] (Zinc oxide), [[CH3 GANS|CH3]] (Iron oxide) and/or [[CuO GANS|CuO]] (Copper oxide).  For example, with radiation contamination, Keshe recommends taking a bath with 2 to 3 litres of CO2 GANS-water in the bath mixed with warm water, and staying in this water for half an hour 2 to 3 times a day.
  
 
* Scalp and Hair Application: You can regularly rub CO2 GANS water on the scalp and in the hair. It soothes the scalp, strengthens hair folical roots and has been shown to bring the original hair color back.  
 
* Scalp and Hair Application: You can regularly rub CO2 GANS water on the scalp and in the hair. It soothes the scalp, strengthens hair folical roots and has been shown to bring the original hair color back.  
Line 47: Line 67:
 
* Aftershave Lotion Application: Alleviates cuts immediately and relaxes the skin.
 
* Aftershave Lotion Application: Alleviates cuts immediately and relaxes the skin.
  
* Eczema Application: Spray the affected skin areas with CO2 GANS water - to date, very rapid improvement has been reported.
+
* Eczema Application: Spray the affected skin areas with CO2 GANS-water - to date, very rapid improvement has been reported.
  
* Bee sting Application: Sprinkle the area of the sting with CO2 GANS water several times.
+
* Bee sting Application: Sprinkle the area of the sting with CO2 GANS-water several times.
  
NOTE: CO2 GANS, CO2 [[How to make GANS-water and Plasma-water|GANS-water]] and [[How to make GANS-water and Plasma-water|Liquid Plasma]] of CO2  are used in Health applications AND for energy production.  ('''CAUTION''': never touch GANS with any part of the body).
+
NOTE: CO2 GANS, CO2 [[How to make GANS-water and Plasma-water|GANS-water]] and [[How to make GANS-water and Plasma-water|Liquid Plasma]] of CO2  are used in Health applications AND for energy production.
  
[[Category:GANS]]
+
{{Back to top}}

Latest revision as of 22:16, 27 February 2020

Basics for the production and processing of GANS
back to categorie: GANS


In order to expand knowledge around the whole topic of GANS, the "Basics of production and processing of GANS" provide a compact overview.

Production

CO2 GANS Box Setup: The Setup here on the picture with led is the best option to produce a very good quality of GANS. ([emergency situations only (lower quality): If there is no led to connect the wires, you can use two Nano-coated Copper wires and twist them counterclockwise together. If you have only not Nano-coated Copper wires, you have to use one led!
CO2 GANS is produced with a Zinc plate connected to a Nano-coated Copper plate (or Copper coil) in a 5% Salt-water solution. For example, 50 grams of Salt are completely dissolved in one liter of clean water and emptied into the plastic box. The plates should be approx. 80% in the water, 2cm above the bottom of the container and 4 to 7cm away from each other. The plates are connected through a Nano-coated Copper wire and a Copper wire. There are two different variants for the production of CO2 GANS. (CAUTION: never drink GANS or touch with any part of the body).
Green led: Anode (+) / Cathode (-)

Required materials

  • Plastic box
  • Clean water
  • Salt (50 gram Salt on 1 liter water)
  • Green led
  • Nano-coated Copper wire
  • Copper wire
  • Nano-coated Copper plates or coils
  • Zinc plate


The Keshe Foundation CO2 Capture KIT (Part 1)
Complete explanation of Creation of CO2 and CH3

CO2/ZnO GANS mixture in the ratio 90:10

During the production of CO2 GANS, a proportion of ZnO (Zinc Oxide) GANS is always also produced. The term CO2 GANS refers to the variant in which CO2/ZnO GANS is produced in a ratio of 90 to 10. The low proportion of ZnO cannot be ruled out, but does not play a role. To produce this GANS, a green led is placed between the connecting wires of the Nano-coated Copper plate or coil. (See picture). The long end of the led (+ pole) is connected to the connecting wire of the Nano-coated Copper plate and the short end (- pole) to the connecting wire of the Zinc plate. This CO2 GANS is creamy, grayish white, the plates should hang about 2cm above the ground and the connecting wires above the water should not touch the water. After a few hours the GANS will form between the plates and settle on the ground after a while.

CO2/ZnO GANS mixture in the ratio of 20:80

No led is placed between the connecting wires of the plates. The two connecting wires must be Nano-coated and turned together counterclockwise. The production of this mixture works very quickly, but the CO2 content is low in relation to the Zinc content. However, it is important to pay attention to the purpose for which this GANS is produced, as it is mainly a ZnO based GANS. In addition it is produced without led and one can consider whether one does not produce a CO2 GANS and a ZnO GANS with led, in order to mix it proportionally correctly together.

CO2 GANS: Uses/Applications

CO2 GANS-water can be used pure or diluted depending on the treatment requirement. It will activates cells, revitalizes the body and strengthens the immune system. CO2 GANS-water is very beneficial to all kinds of muscle injuries. When used as a spray it immediately relieves pain. However, in the case of a broken bone(s), do not apply CO2 GANS-water directly to fracture(s). Pain at the point of a bone fracture triggers the body to bring needed Calcium to the area of the fracture that is required for the healing process. Therefore, do not spray directly on the fracture point; spray the area around it.

  • Oral Application: CO2 GANS water can be taken orally (Eg. drops or 5ml to 25ml in half a liter of water - 1 to 2 times daily (according to the recommendations).
  • Foot Bath Application: Add CO2 GANS water to lukewarm water in a foot bath. When repeatedly applied this eliminates athlete's foot and pulls heavy metals out of the body.
  • Full Bath Application: You can use CO2 GANS water AND the GANS waters of ZnO (Zinc oxide), CH3 (Iron oxide) and/or CuO (Copper oxide). For example, with radiation contamination, Keshe recommends taking a bath with 2 to 3 litres of CO2 GANS-water in the bath mixed with warm water, and staying in this water for half an hour 2 to 3 times a day.
  • Scalp and Hair Application: You can regularly rub CO2 GANS water on the scalp and in the hair. It soothes the scalp, strengthens hair folical roots and has been shown to bring the original hair color back.
  • CO2+ ZnO GANS Liquid Plasma Mixture Spray Application: On the face- revitalizes the skin, refreshes and rejuvenates the skin.
  • Aftershave Lotion Application: Alleviates cuts immediately and relaxes the skin.
  • Eczema Application: Spray the affected skin areas with CO2 GANS-water - to date, very rapid improvement has been reported.
  • Bee sting Application: Sprinkle the area of the sting with CO2 GANS-water several times.

NOTE: CO2 GANS, CO2 GANS-water and Liquid Plasma of CO2 are used in Health applications AND for energy production.

back to top